The modulation effect of substrate doping on multi-node charge collection and single-event transient propagation in 90-nm bulk complementary metal-oxide semiconductor technology

Variation of substrate background doping will affect the charge collection of active and passive MOSFETs in complementary metal-oxide semiconductor (CMOS) technologies, which are significant for charge sharing, thus affecting the propagated single event transient pulsewidths in circuits. The trends of charge collected by the drain of a positive channel metal-oxide semiconductor (PMOS) and an N metal-oxide semiconductor (NMOS) are opposite as the substrate doping increases. The PMOS source will inject carriers after strike and the amount of charge injected will increase as the substrate doping increases, whereas the source of the NMOS will mainly collect carriers and the source of the NMOS can also inject electrons when the substrate doping is light enough. Additionally, it indicates that substrate doping mainly affects the bipolar amplification component of a single-event transient current, and has little effect on the drift and diffusion. The change in substrate doping has a much greater effect on PMOS than on NMOS.     

离子微束技术及其多学科应用

通过微米孔准直或电磁聚焦技术可将加速器产生的MeV离子束形成微米尺寸的离子束斑(微束), 从而用来研究固体和生物样品的微米空间分辨的材料信息和辐照响应。 结合MeV离子微束的发展历史综述了微束技术和跨学科应用, 包括利用微束开展具有空间分辨的离子束分析、 单粒子效应、 微纳加工和细胞辐射响应等研究。 介绍了中国科学院近代物理研究所的高能重离子微束辐照装置, 该装置成功地将总能量为1 GeV的C离子在大气中聚焦为1 μm×2 μm的微米束斑。 Beam of MeV ions from particle accelerators can be confined by collimators or focused by electrical/magnetic quadruples into micrometer size, and this microbeam can be used to obtain spatial information or radiation effect in solids and biological samples. This paper reviews the technical developments and the multi disciplinary applications of microbeam, including ion beam analysis, single event effect in semiconductor devices, proton beam writing and cellular response to targeted particle irradiations. Finally, the high energy heavy ion microbeam facility at the Institute of Modern Physics of Chinese Academy of Sciences is introduced, which has successfully focused 1 GeV Carbon ions into a beam spot of 1 μm×2 μm in air.     

基于PXI总线的阵列探测器数据获取系统

描述了一种适用于阵列探测器的数据获取系统。系统基于PXI总线, 采用标准NIM插件作为前端电子学。系统软件采用C/C++语言编写, 在线分析通过调用ROOT类库实现, 系统运行在Linux操作系统下。多次测试结果表明, 系统稳定可靠, 单个ADC通道可以处理的最大事例率为40 kHz。A data acquisition system for array detectors is described. The system is based on PXI bus with standard NIM modules used as front\|end electronics. The system software is written in C/C++ language with its online analysis modules realized by ROOT class library. Several runs of the system under Linux show that it is reliable and is capable of handling event rates up to 40 k events/s for 1 ADC channel.     

直流电压等离子体点火器点火特性研究

使用自行设计的等离子体点火装置,对极间电流随进口氩气压力的变化规律以及不同进口氩气压力和工作电流条件下等离子体点火器出口射流特性进行了实验研究。利用四通道CCD光谱仪测量了点火器出口处的发射光谱特征,并计算了等离子体的电子温度。结果表明,极间电流随进口氩气压力的增大而逐渐减小,等离子体点火器的射流长度随进口氩气流量的增大先增大后减小,随工作电流的增大而增大,等离子体点火器的工作电流随进口氩气流量的增大而减小,随电源输出电流增大而增大,等离子体射流的电子温度随氩气流量的增大而降低,随工作电流的增大而升高。所得结果对等离子体点火系统在航空发动机的实际应用具有一定的指导意义和参考价值。     

多维温度场对光纤环Shupe效应误差影响的理论分析

光纤环作为干涉型光纤陀螺的核心敏感元件,易受时变温度环境引起的Shupe非互易性相移的影响,进而严重降低对于惯性空间转动的测量精度.本文推导了目前广泛应用的四极绕法光纤环的温度效应误差模型,分析了沿光纤环径向、轴向与圆周方向多维温度场对于零偏漂移的影响机理并进行了仿真验证.研究结果表明,径向与轴向的瞬态温场引起的零偏误差正比于光纤环各层外内壁温变速率之差的加权和,并且随着接近光纤进出的顶层,其所占份额将线性增大.圆周方向的零偏误差则取决于光纤进出端与长度中点连线两侧温变速率空间分布的对称性,并且当不均匀的温度场分布远离进出端时,其影响将减小.以上发现可为复杂温度环境下工作的陀螺仪表与惯性导航系统的热结构设计提供理论指导与工程参考.     

CO_2-油-水体系的相平衡特性研究

CO_2驱油技术在提高原油采收率及温室气体地质埋存方面具有广阔的应用前景,因此准确预测油藏环境条件CO_2-油-水混合体系的相平衡特性成为目前重要的研究课题。本文基于P-R EOS和Rachford-Rice闪蒸公式,对CO_2-油-水体系在不同油组分、不同混合比例及不同压力下的相平衡特性进行了计算分析。结果表明,在相同压力下,碳原子数较小的油组分在气相中含量较大;体系内较高的CO_2含量更利于油组分的气化。CO_2-油-水体系的气相黏度随压力增大而增加,油组分的碳原子数越小,其气相黏度值越小,且受系统压力影响越大。CO_2-油-水体系的液相黏度随系统压力增大而逐渐减小,碳原子数较大的油组分对应着较高的液相黏度,且受压力影响更加明显,结果表明CO_2具有明显的液相降黏效果。     

不饱和糖功能单体接枝聚氨酯膜的制备及其血液相容性

通过葡萄糖、丙烯酸羟乙酯和丁二胺反应,制备了含不饱和双键的糖基功能单体。 采用傅里叶红外光谱和核磁共振氢谱对合成的产物进行结构表征确定。 采用紫外光引发接枝聚合技术,将制备的不饱和糖单体接枝聚合到聚氨酯膜的表面,以衰减全反射模式下傅里叶红外光谱对表面接枝反应进行了确认。 通过静态水接触角实验和血小板黏附实验,分别对改性聚氨酯膜表面的亲水性和血液相容性进行了研究,结果表明,改性聚氨酯膜表面的接触角从86°降低到45°,血小板的粘附量由14.36×10³ cells/mm²减少到2.57×10³ cells/mm²,亲水性明显增强,血液相容性显著改善。     

A 0.33-THz second-harmonic frequency-tunable gyrotron

Dynamics of the axial mode transition process in a 0.33-THz second-harmonic gyrotron is investigated to reveal the physical mechanism of realizing broadband frequency tuning in an open cavity circuit. A new interaction mechanism about propagating waves, featured by wave competition and wave cooperation, is presented and provides a new insight into the beam-wave interaction. The two different features revealed in the two different operation regions of low-order axial modes(LOAMs) and high-order axial modes(HOAMs) respectively determine the characteristic of the overall performance of the device essentially. The device performance is obtained by the simulation based on the time-domain nonlinear theory and shows that using a 12-kV/150_(-mA) electron beam and TE_(-3,4) mode, the second harmonic gyrotron can generate terahertz radiations with frequency-tuning ranges of about 0.85 GHz and 0.60 GHz via magnetic field and beam voltage tuning,respectively. Additionally, some non-stationary phenomena in the mode startup process are also analyzed. The investigation in this paper presents guidance for future developing high-performance frequency-tunable gyrotrons toward terahertz applications.     

基于光栅应变传感器的纳米测量机探针设计

为了提高纳米坐标测量机探针的测量精度,且能满足对复杂曲面或微结构进行精确测量的要求,提出了一种新颖的基于微探针系统的光纤布拉格光栅(FBG)探针。该探针具有较高灵敏度和可重复性。提出该新型FBG探针,即探针里有一个熔融的球形顶端,FBG作为应变传感器内置在测杆上。介绍了光纤探针的基本原理,并利用有限元软件ANSYS 11对探针的应变分布在轴向和横向载荷两种典型配置分别进行了仿真分析,结果表明仿真分析和理论计算相吻合。通过实验对光纤探针的灵敏度和分辨率分别进行测试。实验结果表明,在轴向载荷条件下,用位移分辨率为1.5 nm的压电换能器对探针进行性能测试,得到光纤探针的测量分辨率为60 nm。即光纤探针具有较高的灵敏度和分辨率,其性能满足实际测量需要。     

光纤陀螺随机漂移补偿中的数据融合方法（英文）

为提高光电平台的控制性能和稳定性,以平台反馈回路所用的光纤陀螺传感器为研究对象,对光纤陀螺角速率的历史输出、当前量测以及随机漂移进行融合补偿。采用双自回归模型确定了光纤陀螺时间序列输出的自回归多项式和光纤陀螺随机漂移的自回归关系。以陀螺当前输出为量测量,结合卡尔曼滤波算法将陀螺历史输出和历史随机漂移融合进状态方程,并进行随机漂移在线估计补偿。实验结果表明,光纤陀螺随机漂移的AR模型能达到90%拟合效果,经卡尔曼滤波补偿后随机漂移能降到1/10。该方法能很好地抑制光电平台三个框架轴光纤陀螺的随机漂移,补偿率为80%~90%。