在镉盐胁迫下扇贝鳃组织应激蛋白的研究

采用透射电子显微镜观察了虾夷盘扇贝(Patinopecten yessoensis)鳃组织细胞的超微结构, 发现镉盐能胁迫鳃组织中的腮丝、细胞核和线粒体产生病变. 利用双向凝胶电泳(2D-PAGE)优化分离扇贝鳃组织的全蛋白, 获得约800个蛋白质斑点, 并筛选出37个由于镉盐胁迫而产生的差异蛋白质斑点. 选用基质辅助激光解吸离子化-飞行时间质谱(MALDI-TOF MS)技术和数据库检索鉴定差异蛋白, 结果发现7个与镉毒性密切相关的蛋白质, 即热休克蛋白70和β-淀粉酶等上调蛋白质及原肌球蛋白、肌动蛋白和钙活化核苷酸酶1等下调蛋白质. 此外, 还发现转录调节子Crp/Fnr家族为低表达蛋白质, 而ABC转运子为高表达蛋白质. 在这些差异蛋白中, 部分蛋白质适合作为连续监测流动海水中镉污染程度及评价其危害性的蛋白指示物.     

Wavefront reconstruction algorithm for wavefront sensing based on binary aberration modes

We propose a new algorithm for wavefront sensing based on binary intensity modulation. The algorithm is based on the fact that a wavefront can be expended with a series of orthogonal and binary functions, the Walsh series. We use a spatial light modulator(SLM) to produce different binary-intensity-modulation patterns which are the simple linear transformation of the Walsh series. The optical fields under different binary-intensity-modulation patterns are detected with a photodiode.The relationships between the incident wavefront modulated with the patterns and their optical fields are built to determinate the coefficients of the Walsh series. More detailed and strict relationship equations are established with the algorithm by adding new modulation patterns according to the properties of the Walsh functions. An exact value can be acquired by solving the equations. Finally, with the help of phase unwrapping and smoothing, the wavefront can be reconstructed. The advantage of the algorithm is providing an analytical solution for the coefficients of the Walsh series to reconstruct the wavefront. The simulation experiments are presented and the effectiveness of the algorithm is demonstrated.     

漫反射立方腔单次反射平均光程的理论和实验研究

根据Beer-Lambert定律可知,增加气体池的有效光程是提高气体监测灵敏度最直接而有效的途径.通过实验研究和分析,漫反射立方腔作为气体池能显著地增加有效光程,因此研究其内部的光线传播规律具有重要意义.基于对漫反射立方腔内光线传播规律的理论分析,得到了单次反射平均光程的理论值,建立了漫反射立方腔内光线传播的理论近似模型,并通过有限元法仿真获得了单次反射平均光程的模拟值.利用可调谐二极管激光吸收光谱技术得到了立方腔的有效光程,间接求得了单次反射平均光程的实验值.对理论值、模拟值和实验值进行比较分析,验证了理论近似模型和有限元法仿真的准确性和稳定性.     

ICP-MS测定食管鳞癌患者各组织中微量元素的含量差异

建立了冷冻干燥微波消解-ICP-MS测定25例食管鳞癌患者手术的癌组织与正常组织中22种元素的方法。样品经真空冷冻干燥后研磨成粉,采用纯硝酸体系微波消解,优化仪器工作各项参数后,以Sc,Ge,Y,In等混合内标进行校正。采用化学计量学方法分析癌组织和正常组织中元素的差异性,实验结果表明,食管鳞癌组织与正常组织有明显的分离趋势,所建立的PLS-DA模型能较好地解释所有的样品信息并能准确地预测未知样品的分类。癌组织的元素代谢情况与正常组织相比具有显著差异,从而揭示了食管鳞癌与元素之间存在着内在联系。     

Spin-cluster glass state in U(Ga_(0.95)Mn_(0.05))_3

We report the study of a low temperature cluster glass state in 5% Mn-doped UGa_3 heavy fermion compound. This compound transforms from a paramagnetic state to a spin-cluster glass state, which is confirmed by measuring the dc susceptibility and magnetization. The ac susceptibility exhibits a frequency-dependent peak around Tf, which provides direct evidence of the cluster glass state. By analyzing the field-dependent magnetization and frequency-dependent ac susceptibility in detail, we deduce that this compound forms a spin-cluster glass state below T_f.     

用GGA+U法研究稀土掺杂对ZnO电子结构磁性和光学性质的影响

基于自旋密度泛函理论框架下的广义梯度近似平面波模守恒赝势方法,确定了准确计算Zn_(16)O_(16)超晶胞各原子对应的U值;通过计算形成能和化学键的布局分析了掺杂结构的稳定性;通过原子电荷布局和自旋电子态密度的计算分析了掺杂结构的能带结构和磁性状态;讨论了各稀土原子掺杂对ZnO吸收光谱的影响.结果表明:稀土元素的引入使晶格膨胀,Zn-O键最长键增大而最小键减小,导致氧四面体畸变;Y/La/Ce掺杂的ZnO具有亚铁磁性,Th掺杂ZnO则呈弱铁磁性,Ac掺杂ZnO为顺磁体;稀土元素使ZnO的价带和导带下移,费米能级进入导带,增强了体系的电导率;Y/La/Ac掺杂对ZnO带隙宽度的影响较小,吸收光谱略微蓝移,而Ce/Th掺杂则有效提升了ZnO对可见光的吸收.     

20Mgβ衰变谱学与15O(α,γ)19Ne反应(英文)

15O（α,γ）19Ne（p,γ）20Na反应链是高温CNO循环向快速质子俘获过程突破的一条关键路径,相关的反应率输入量可通过20Mg的β衰变可布居19Ne共振态并测量其衰变性质来获得。通过高效率高精度地测量20Mg β衰变中产生的质子与γ射线得到了20Mg衰变的详细信息,并构建了完整的衰变纲图,还进行了19Ne 4 033 keV共振态衰变性质的探索,获得了该态在20Mg β衰变中被布居的分支比上限。通过比20Mg和20O镜像能级跃迁的结果确认了同位旋非对称性,为检验相关理论模型提供了精确的实验数据。对于突破路径中有重要影响的19Ne 4 033 keV共振态的性质,有待更高统计的实验进一步研究。The breakout from the hot CNO cycle to the rapid proton capture process can occur via the 15O(α,γ)19Ne(p,γ)20Na reaction sequence, and the β decay of 20Mg can be used as an alternative method to characterize some specific resonances, which will provide detailed nuclear structure input for reaction rate calculations. The reliable information on the decay properties and structure of 20Mg was obtained by measuring the emitted particles and γ-rays in the β decay with high efficiency and high resolution. Attempt was also made to search for the decay channels associated with the 4 033 keV resonance in 19Ne. To test fundamental symmetries, the transitions in the mirror decays of 20Mg and 20O were compared. The precise experimental data presented here would be important to constrain the theoretical calculations. It is desirable to clarify the astrophysically relevant problem by further experiments with improved statistics on the basis of the present work.     

"我"——"三草酸合铁(Ⅲ)酸钾晶体"的生长及影响因素

This article tries to personify potassium ferrioxalate crystal as "I" to describe the formation process and the factors affecting the growth of potassium ferrioxalate crystal. After growing into beautiful green crystals, I dreamed I was participating in the jewelry beauty contest. A serious of wonderful conversations between emerald and I revealed the properties and applications of potassium ferrioxalate crystal. It inspires and guides students to understand the growth of crystals and their properties, and it also stimulates students' interest in studying chemistry.     

射流冲击泡沫金属流动液膜传热的实验研究

薄液膜蒸发由于其优良的传热特性而被广泛应用于工业领域。在流动液膜上表面覆盖铜质泡沫金属,并耦合空气射流冲击,能够进一步强化传热。多孔泡沫金属提供的毛细驱动力能够有效控制流动液膜的厚度以避免干涸,同时多孔材料特殊的固体骨架构造可以扩大固液、气液传热面积。为了研究射流冲击条件下多孔介质覆盖流动液膜的传热特性,本文通过实验方法,对包括液膜流速Vf、空气射流速度Va、液膜厚度δf和多孔介质孔隙率ε在内的影响因素进行分析,研究并对比这些因素对加热壁面温度Tw、表面传热系数hw以及传热系数提升率的影响。     

Superconductivity of bilayer titanium/indium thin film grown on SiO_2/Si(001)

Bilayer superconducting films with tunable transition temperature(Tc) are a critical ingredient to the fabrication of high-performance transition edge sensors. Commonly chosen materials include Mo/Au, Mo/Cu, Ti/Au, and Ti/Al systems. Here in this work, titanium/indium(Ti/In) bilayer superconducting films are successfully fabricated on SiO_2/Si(001)substrates by molecular beam epitaxy(MBE). The success in the epitaxial growth of indium on titanium is achieved by lowering the substrate temperature to-150?C during indium evaporation. We measure the critical temperature under a bias current of 10 μA, and obtain different superconducting transition temperatures ranging from 645 m K to 2.7 K by adjusting the thickness ratio of Ti/In. Our results demonstrate that the transition temperature decreases as the thickness ratio of Ti/In increases.