UO22＋•nH2O和PuO22＋•nH2O (n＝2, 4, 5, 6)密度泛函理论研究

首先用密度泛函理论(DFT)方法研究了铀酰和钚酰离子的几何与电子结构, 计算结果与实验基本符合, 表明DFT方法也能用于含铀和钚重原子的化合物计算. 然后对铀酰和钚酰水合离子的几何构型、Mulliken集居数分布以及铀酰(钚酰)与配体水分子的结合能进行计算, 计算结果表明UO₂^2＋•5H₂O和PuO₂^2＋•5H₂O分别为铀酰和钚酰系列水合离子中最稳定的配合物.     

U原子和CO反应机理的第一性原理的理论研究

在有关实验结果的基础上提出了U原子和CO分子的各种可能反应通道, 然后采用第一性原理对反应通道上的各物种的几何构型、谐振频率以及总能量进行了计算和研究, 计算结果表明, 初级和次级反应的稳定产物分别为CUO和(η²-C₂)UO₂. 提出了最可能反应通道为U原子以C端或侧位进攻CO分子引起反应, 并用分子轨道理论解释了该反应机理.     

Superconductivity of bilayer titanium/indium thin film grown on SiO_2/Si(001)

Bilayer superconducting films with tunable transition temperature(Tc) are a critical ingredient to the fabrication of high-performance transition edge sensors. Commonly chosen materials include Mo/Au, Mo/Cu, Ti/Au, and Ti/Al systems. Here in this work, titanium/indium(Ti/In) bilayer superconducting films are successfully fabricated on SiO_2/Si(001)substrates by molecular beam epitaxy(MBE). The success in the epitaxial growth of indium on titanium is achieved by lowering the substrate temperature to-150?C during indium evaporation. We measure the critical temperature under a bias current of 10 μA, and obtain different superconducting transition temperatures ranging from 645 m K to 2.7 K by adjusting the thickness ratio of Ti/In. Our results demonstrate that the transition temperature decreases as the thickness ratio of Ti/In increases.     

UO22+·nH2O和PuO22+·nH2O(n=2,4,5,6)密度泛函理论研究

首先用密度泛函理论(DFT)方法研究了铀酰和钚酰离子的几何与电子结构,计算结果与实验基本符合,表明DFT方法也能用于含铀和钚重原子的化合物计算.然后对铀酰和钚酰水合离子的几何构型、Mulliken集居数分布以及铀酰(钚酰)与配体水分子的结合能进行计算,计算结果表明UO22+·5H2O和PuO22+·5H2O分别为铀酰和钚酰系列水合离子中最稳定的配合物.     

Design,fabrication, and characterization of Ti/Au transition-edge sensor with different dimensions of suspended beams

For photon detection, superconducting transition-edge sensor (TES) micro-calorimeters are excellent energy-resolving devices. In this study, we report our recent work in developing Ti-/Au-based TES. The Ti/Au TES devices were designed and implemented with a thickness ratio of 1:1 and different suspended structures using micromachining technology. The characteristics were evaluated and analyzed, including surface morphology, 3D deformation of suspended Ti/Au TES device structure, I-V characteristics, and low-temperature superconductivity. The results showed that the surface of Ti/Au has good homogeneity and the surface roughness of Ti/Au is significantly increased compared with the substrate. The structure of Ti/Au bilayer film significantly affects the deformation of suspended devices, but the deformation does not affect the I-V characteristics of the devices. For devices with the Ti/Au bilayer (150μm×150μm) and beams (100μm×25μm), the transition temperature (T_c) is 253 mK with a width of 6 mK, and the value of the temperature sensitivity α is 95.1.     

被动法高浓铀年龄测量技术研究

利用HPGe-γ谱仪测量了多个年龄段的HEU样品, 获得了样品中N(214Bi)/N(234U)的值, 从而计算得到了HEU的年龄,其测量结果与参考值吻合较好。最后结合实验结果,系统分析了其它可能用于测量高浓铀年龄的方法,并对各种方法的可行性进行了分析。 结果表明, 214Bi/234U比值法是最佳的选择。N(231Pa)/N(235U)法中对γ谱如何解谱还需作进一步研究。 The HEU sample was measured by HPGe- γ spectrometry. By analyzing the detected γ spectrum, the N(214Bi)/N(234U) of the HEU sample was acquired, and the age of HEU samples was determined, which was coincided with the reference value. At last, the other potential methods of determining the age of HEU were analyzed systematically. N(214Bi)/N(234U) is more feasible,and algorithm of spectrum decomposition in N(231Pa)/N(235U) should be studied further.