排序方式: 共有51条查询结果,搜索用时 125 毫秒
41.
随着CMOS工艺的发展,热载流子效应对沟道热噪声的影响随着器件尺寸的降低而增大,传统热噪声模型未能准确表征沟道的热噪声.本文通过解能量平衡方程,得到电子温度表达式,并结合沟道漏电流表达式,建立了沟道热噪声模型.利用建立的电子温度表达式,该热噪声模型考虑了热载流子效应的影响,并且在计算热噪声的过程中考虑了电子温度对迁移率降低的影响以及温度梯度对热噪声的影响.通过分析与计算,结果显示,随着器件尺寸的减小,温度梯度对电子温度产生显著影响,使得热载流子效应的影响增大,热载流子效应对热噪声的增长作用超过了迁移率降低对热噪声的减小作用,最终导致热噪声增大.本文建立的沟道热噪声模型可应用于纳米尺寸金属-氧化物半导体场效应晶体管器件的噪声性能分析及建模. 相似文献
42.
The positive gate-bias temperature instability of a radio frequency (RF) sputtered ZnO thin-film transistor (ZnO TFT) is investigated. Under positive gate-bias stress, the saturation drain current and OFF-state current decrease, and the threshold voltage shifts toward the positive direction. The stress amplitude and stress temperature are considered as important factors in threshold-voltage instability, and the time dependences of threshold voltage shift under various bias temperature stress conditions could be described by a stretched-exponential equation. Based on the analysis of hysteresis behaviors in current- voltage and capacitance-voltage characteristics before and after the gate-bias stress, it can be clarified that the threshold- voltage shift is predominantly attributed to the trapping of negative charge carriers in the defect states located at the gate- dielectric/channel interface. 相似文献
43.
探讨LaCl3对小鼠原位移植性肝癌的抗肿瘤作用.通过直接注射法建立小鼠肝原位移植瘤模型,于造模后第二天开始给药,每天分别以1.0,0.5,0.1 mg·kg-1LaCl3,0.1 mg·kg-1LaCl3和10 mg·kg-15-Fu,20 mg·kg-15-Fu腹腔注射,连续给药10d,通过抑瘤率测定,生存期观察,及瘤组织坏死程度分析来检测LaCl3,的抗肝癌作用.结果显示,0.5 mg·kg-1及联合用药组可明显抑制小鼠肝癌的生长,并显著延长小鼠生存期.LaCl3对小鼠原位移植性肝癌有显著的抗肿瘤作用. 相似文献
44.
45.
Long time behavior of solutions to semilinear parabolic equations with nonlocal nonlinear source ut - △u = ∫Ω g(u)dx inΩ× (0, T) and with nonlocal boundary condition u(x, t) = ∫Ω f(x, y)u(y, t)dy on(e) Ω× (0, T) is studied. The authors establish local existence, global existence and nonexistence of solutions and discuss the blowup properties of solutions. Moveover, they derive the uniform blowup estimates for g(s) = sp(p > 1) and g(s) = es under the assumption fΩ f(x, y)dy < 1 for x ∈(e)Ω. 相似文献
46.
研究2维的非自治非线性Schrdinger方程长时间的动力学行为,证明了一致吸引子的存在性,并给出了该一致吸引子Hausdorff维数的上界, 相似文献
47.
48.
以煤焦油沥青为碳源,纳米Fe(OH)3为模板制备了一种三维石墨烯类多孔碳材料,通过测试氧还原性能,确定了最佳制备工艺为:反应物煤沥青,纳米Fe(OH)3,KOH的质量配比为6:8:4,热解温度为800 ℃. 扫描电镜(SEM)测试结果表明,制得的产品具有明显的孔结构且分布均匀. 透射电镜(TEM)测试结果进一步表明,产品具有泡沫状的多孔结构,高分辨透射电子显微镜图像表明该产品具有多层的三维石墨烯结构. X射线衍射(XRD)数据表明,在29o位置出现的衍射峰是多层石墨烯结构,42o位置的衍射峰表明,产品具有一定程度的石墨化. 由拉曼光谱结果计算IG与I2D的比值表明产品为多层石墨烯结构. X射线光电子能谱分析(XPS)检测到的C元素含量约为88.7%,主要包含C-C键,图谱中未发现铁元素的存在,证明纳米Fe(OH)3模板已被洗净. 根据比表面积测定(BET)可知,多孔碳的比表面积为2040 m2•g-1,孔径集中分布在10~400 nm,这与TEM测试得到的结果一致. 在0.1 mol•L-1 KOH中进行催化氧还原性能测试,起始还原电位为0 V (vs. Hg/HgO),电子转移数为3.58。测试结果表明,制得的三维石墨烯类多孔碳具有良好的催化氧还原性能. 相似文献
49.
人教版义务教育课程标准实验教科书九年级《化学》上册中,有"设计一个简易的灭火器"的探究活动[1]。针对教材中实验装置的不足,笔者进行了全新的设计,达到了理想的效果,非常适合学生进行探究实验。 相似文献
50.