核壳结构AlOOH的制备、表征及其生长机制

在柠檬酸钠和硝酸铝水溶液体系中, 通过一步水热法制备了蜷缩刺猬状和核壳结构的AlOOH微球, 并用X射线衍射(XRD)、Fourier变换红外(FTIR)光谱、扫描电镜(SEM)、透射电镜(TEM)、氮气吸脱附和光致发光等分析手段对制备的样品进行了形貌和结构表征. 对反应时间、反应物浓度等影响因素进行了研究. 实验结果表明: 反应时间和反应物柠檬酸钠的浓度对所得AlOOH微球结构的尺寸和形貌具有重要影响; 蜷缩刺猬状和核壳结构AlOOH微球都具有较大的比表面积, 分别为171.5和178.6 m2·g-1; 不同形貌的AlOOH具有不同的荧光发射峰. 并初步探讨了核壳结构AlOOH微球的生长机制.     

SiO2∶Sm粉体：溶胶-凝胶法制备及特殊荧光性能

采用溶胶-凝胶法制备SiO2:Sm粉体,通过TG-DSC、FTIR、MAS-NMR、PL对材料的结构和性能进行测试表征.FTIR分析显示样品位于960 cm-1的吸收峰归属于Si-O-Sm键的变形振动,29Si MAS-NMR证实Sm3+进入SiO2网络结构.在380 nm入射光激发下样品产生除Sm3+特征发光以外的蓝绿荧光,对不同Sm3+掺量样品荧光性能进行对比分析,结果表明这种特殊的荧光发射与Si-O-Sm键的形成有关.     

Photoluminescence study of the annihilation process of donor-bound excitons in ZnO： observation of quantum mechanical interference

We report a photoluminescence observation of the coupling of donor-bound excitons and longitudinal optical phonons in high-quality ZnO crystals at 5 K. The first-order phonon Stockes line of donor-bound excitons exhibits a distinct asymmetric line shape with a clear dip at its higher energy side, suggesting that quantum mechanical interference occurs during the annihilation of donor-bound excitons. The donor binding energy is determined to be 49.3 meV from spectral featural.     

Investigation on LaF3/porous silicon system for photonic application

<正>We present the investigation on LaF_3/porous silicon(PS) system that has properties of both the materials to be applied in photonics.Epilayers of LaF_3 are grown on PS under different anodization conditions using electron-beam evaporation(EBE).The characteristics of the LaF_3/PS system are analyzed by X-ray diffraction(XRD),scanning electron microscope(SEM),energy dispersive X-ray spectroscopy(EDX),and photoluminescence(PL).XRD confirms the polycrystalline nature of the LaF_3 film.Nearly stoichiometric growth of LaF_3 on PS is established by EDX.Such a thin LaF_3 layer grown on PS leads to a good enhancement of PL yield of PS.But with the increasing thickness of LaF_3 layer,PL intensity of PS is found to decrease along with a small blue-shift.     

Photoluminescence and thermoluminescence properties of SnO2 nanoparticles embedded in Li20-K20-B203 with Cu-doping

Cu-doped borate glass co-doped with SnO2 nanoparticles is fabricated by melt quenching. The structure and morphology of the samples are examined by X-ray diffraction and field emission scanning electron microscopy. Up-conversion enhancement is observed in the photoluminescence （PL） and thermolumines- cence （TL） intensities of the glass. PL emission spectra are identified in the blue and green regions, and a fourfold increase in emission intensity may be observed in the presence of embedded SnO2 nanoparticles. The glow curve is recorded at 215℃, and fourfold increases in TL intensity are obtained by addition of 0.1 mol% SnO2 nanoparticles to the glass. Higher TL responses of the samples are observed in the energy range of 15-100 KeV. At energy levels greater than -0.1 MeV, however, flat responses are obtained. The activation energy and frequency factor of the second-order kinetic reaction are calculated by the peak shape method.     

白光LED用光转换无机荧光粉

本文综述了近年来白色发光二极管用光转换无机荧光粉的国内外研究进展.分别从能被蓝光LED芯片激发的黄色、绿色与红色荧光粉,和能被近紫外LED芯片激发的蓝色、绿色与红色荧光粉以及单一基质白光荧光粉进行了综述,对性能较好的荧光粉进行了重点推介;对相应的铝酸盐、硅酸盐、氮(氧)化物、钼酸盐等荧光粉的光致发光光谱及其调控原理进行...     

Preparation and photoluminescence of nanowire array and films of cadmium sulfied by electrodepositing in organic solvent

Nanowir array and film of cadmium sulfide were prepared by eletroplating in organic solvent dimethyl sulfoxide with CdCl2 and element sulfur under different temperature and current density.The UV-VIS absorption spectra show that increasing the electroplating temperature is benefit to forming perfect crystallites of energy shift for the lowest sveral excitons is given and compared with th experiment.The photoluminescence spectrum consists of two parts:the first is produced by recombination of the defcets and the second by recombination of excitons.     

基于混酸回流制备碳点的中和过程

Carbon dots (C dots) are relatively novel carbon nanomaterials that have attracted significant interest due to their unique photoluminescence, good biocompatibility, and stability. The preparation methods of C dots was usually summarized into "top-down" and "bottom-up", and mixed acid reflux is a top-down strategy that can be used to synthesize C dots, during which neutralization is a necessary step that can significantly influence the properties and potential applications of the final product. Previously, this research area mainly focused on tuning the properties of C dots by changing the starting materials and/or varying the reaction conditions; the influence of the reagents used during neutralization has been largely ignored. As the previously reported C dots prepared by mixed acid reflux were obtained from different starting materials under varied conditions, a meaningful comparison is difficult. Herein, yellow-emitting C dots were prepared by mixed acid-refluxing a carbon-rich material derived from fullerene carbon soot. For the same batch of as-prepared C dots, the influences of four reagents, i.e., NaOH, Na₂CO₃, K₂CO₃, and NH₃·H₂O, during neutralization on the structures and photoluminescence of the resulting C dots were investigated in detail. The results of thermogravimetric analysis, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy clearly showed that the reagent used during neutralization can affect the degree of dissociation of the acidic functional groups on the C dots. This is further supported by examination of the C dot/surfactant mixtures where subtle changes in the phase behavior were observed. Structural changes of the C dots cause variations in their surface states, ultimately altering the optical characteristics, including UV-vis absorption and fluorescence. Among the treated C dots, the sample prepared with Na₂CO₃ showed the strongest emission under the same excitation wavelength, while that prepared with NH₃·H₂O exhibited a distinct red shift (~8 nm) in the emission curve. The results presented herein provide clear evidence that neutralization reagent selection is important for optimizing the properties of the resulting C dots obtained by mixed acid reflux. In addition, the photoluminescence of the C dots can be influenced by their counterions, providing a novel method for tuning the properties of C dots while explaining their behavior in saline solutions. In short, the basicity of the neutralizing reagent and the type of counterions affect the structure of the C dots surface, which brings different performances. This work reminds researchers that it is necessary to use the type of neutralizing reagent as an experimental condition when preparing C dots in the future.     

基于碳点的发光材料在潜在手印显现中的应用

遗留在犯罪现场的肉眼不可见的潜在手印是一类重要的痕迹物证,检验鉴定前需要使用一定技术手段将其显现出来。近年来,一些新材料和新技术的引入为手印显现技术的革新注入了新活力,其中稀土发光材料、量子点、荧光金属纳米簇等发光材料在该领域展现出极大潜力。碳点作为具有良好光致发光性能的新型纳米材料,近来逐渐引起了手印显现领域研究人员的广泛关注。本文综述了两类基于碳点材料的手印显现技术国内外研究进展,分别是液体分散碳点用于手印显现和固态发光碳点用于手印显现。具体来说,液体分散碳点显现手印的原理主要基于传统小微粒悬浮液机理或一些特殊效应(咖啡环效应、界面偏析效应);用于手印显现的固态发光碳点包括固态碳点粉末和固态碳点复合粉末两类,合成这些材料时研究人员采用了不同的策略。最后,从三个方面分析了碳点在手印显现应用中面临的问题,即碳点物理形貌和表面性质、碳点光致发光性质以及碳点显现过程与化学生物分析兼容性,并就解决问题的可能途径提出了展望。