负压爆炸载荷和数据采集间隔对弹性开孔板动应力集中的影响

基于ANSYS 7.0/LS-DYNA程序,对3 m3 m四边简支,厚度0.025 m,中心开有0.3 m0.3 m方孔的弹性板,在正压和负压三角爆炸载荷作用下的应力响应进行了分析,利用能量密度时间分布函数（TDFED）确定了动应力集中因子,并给出其计算步骤。计算结果表明计算总时间和数据采集时间间隔对动应力集中因子影响较大,而负压荷载影响较小。     

开区注氮采空区自燃温度场的数值模拟研究

为了研究开区注氮采空区遗煤自燃和被抑制的力学过程，用非均质多孔介质中的渗流连续性方程、气体弥散方程和综合传热方程的联立，建立了采空区注氮非定常数值模型．结合实例，用迎风格式有限元方法求解．给出了采空区的漏风流态、氮气流态，描绘了采空区自燃过程中氧、CO浓度和温度分布的变化过程．计算考虑了瓦斯涌出和工作面推进的影响．得到注氮条件下采空区高温区形状变窄；随着注氮量的提高，使自然发火期逐渐变长，直至不自燃．理论计算与实际情况吻合．     

Rheology of coal suspensions

Proper design of operations encountered in preparation, transport and employment of suspensions like coal slurries and coal-oil mixtures require an accurate knowledge of their rheological behaviour.Such concentrated suspensions generally exhibit non-Newtonian behaviour (shearthinning) which is more pronounced at higher coal concentrations. The nature of the dispersing medium influences the aggregation state of the disperse phase and, consequently, affects the stability and the rheology of the systems. In the present paper coal suspensions prepared with different dispersing media and covering a wide range in solid phase concentration are studied, by using a rotational coaxial cylinders viscometer.Different models have been taken into consideration for correlating experimental data. In particular, in order to describe the dependence of viscosity on shear rate and solid phase concentration, the suitability of the model suggested by Smith and Bruce is evaluated. Accordingly, the aggregation state of the disperse phase as well as its dependence on shear rate and dispersing medium can be estimated.     

Dynamic stress of a circular cavity buried in a semi-infinite functionally graded piezoelectric material subjected to shear waves

The paper presents a theoretical method to investigate the multiple scattering of shear waves and dynamic stress around a circular cavity in a semi-infinite functionally graded piezoelectric material. The analytical solutions of wave fields are expressed by employing wave function expansion method and the expanded mode coefficients are determined by satisfying the boundary conditions of the cavity. Image method is used to satisfy the free boundary condition of the semi-infinite structure. According to the analytical expression of this problem, the numerical solutions of the dynamic stress concentration factor around the cavity are presented. The effects of the piezoelectric property, the buried depth of the cavity, the incident wave number and the nonhomogeneous parameter of materials on the dynamic stress around the cavity are analyzed. Analyses show that the piezoelectric property has great effect on the dynamic stress in the region of intermediate frequency and the effect increases with increasing wave number. When the nonhomogeneous parameter of materials is less than zero, it has less influence on the maximum dynamic stress around the cavity; however, it has greater influence on the distribution of the dynamic stress around the cavity. When the nonhomogeneous parameter of materials is greater than zero, it has greater influence on both the maximum dynamic stress and the distribution of dynamic stress around the cavity, especially in the case that the buried depth is comparatively small.     

用云纹干涉法测量带孔复合材料板应变系数

介绍云纹干涉法在复合材料中应用的一个例子，用云纹干涉法测量带孔复合材料板应变集中系数．     

The effect of velocity on rigid wheel performance

A simulation model to predict the effect of velocity on rigid-wheel performance for off-road terrain was examined. The soil–wheel simulation model is based on determining the forces acting on a wheel in steady state conditions. The stress distribution at the interface was analyzed from the instantaneous equilibrium between wheel and soil elements. The soil was presented by its reaction to penetration and shear. The simulation model describes the effect of wheel velocity on the soil–wheel interaction performances such as: wheel sinkage, wheel slip, net tractive ratio, gross traction ratio, tractive efficiency and motion resistance ratio. Simulation results from several soil-wheel configurations corroborate that the effect of velocity should be considered. It was found that wheel performance such as net tractive ratio and tractive efficiency, increases with increasing velocity. Both, relative wheel sinkage and relative free rolling wheel force ratio, decrease as velocity increases. The suggested model improves the performance prediction of off-road operating vehicles and can be used for applications such as controlling and improving off-road vehicle performance.     

A Solute Transport in Stratified Media

Two-dimensional and steady solute transport in a stratified porous formation is analysed under assumption that the effect of pore-scale dispersion is negligible. The longitudinal dispersion produced as a result of the vertical variation of hydraulic conductivity is analysed by averaging the variability of a solute flux concentration and conductivity. The evolution of the solute flux concentration is expressed with respect to the correlated variable, that is the travel (arrival) time at a fixed location and the averaging procedure is constructed to satisfy the boundary condition where the inlet concentration is a known function of time. In such a statement, a velocity-averaged solute flux concentration is described by a conventional dispersion model (CDM) with a dispersion coefficient which is a function of the arrival time. It is demonstrated that such CDM satisfies the assumption that hydraulic conductivity of the layers is gamma distributed with the parameter of distribution which is chosen to represent a reasonable value of the field scale solute dispersion. The overall behaviour of the model is illustrated by several examples of two-dimensional mass transport.     

含孔软铁磁材料Mindlin板中弹性波散射问题

基于考虑磁弹相互作用的Mindlin板弯曲波动方程，采用波函数展开法，分析研究 了含孔软铁磁材料Mindlin板中弹性波散射与动应力集中问题，给出了问题的分析 解和数值算例. 通过分析发现：磁感应强度对动弯矩集中系数和动剪力集中系数有 增加的作用，特别是在低频的情况下.     

LIF技术测量浓度场的影响因素分析

本文研究了作为示踪剂的荧光素钠的谱图，测定了荧光素钠在蒸馏水和普通自来水中的吸光系数，估算了荧光分子的平均寿命。最后，详细分析了浓度、激光功率、温度、ｐＨ值和截止滤光片对荧光强度的影响。     

纺织结构复合材料力学性能的实验研究

本文通过实验测定了三维编织结构复合材料侧边未切割、受切割和中央钻孔试件的拉伸性能，对比了受切割和未切割纤维对于试件侧边拉伸应变的影响，并且讨论了拉伸失效的机理和原因．发现受切割和钻孔试件的拉伸性能低于未加工试件的性能，受切割侧边的拉伸应变高于未切割侧边的拉伸应变，三维编织结构复合材料的拉伸失效主要由纤维断裂引起的．文中还对三维编织结构复合材料的孔边应力集中现象进行了研究，并进行了深入分析，得到一个重要结论，即四步法复合材料的孔边应力集中系数比传统层板复合材料和金属材料的低．从这个意义上说，三维编织结构复合材料适合于作为含孔结构的连接件．