Judiciously 3‐partitioning 3‐uniform hypergraphs

Bollobás, Reed, and Thomason proved every 3‐uniform hypergraph ? with m edges has a vertex‐partition V()=V₁?V₂?V₃ such that each part meets at least edges, later improved to 0.6m by Halsegrave and improved asymptotically to 0.65m+o(m) by Ma and Yu. We improve this asymptotic bound to , which is best possible up to the error term, resolving a special case of a conjecture of Bollobás and Scott.     

Quantification of multiple compounds containing heterogeneous elements in the mixture by one‐dimensional nuclear magnetic resonance spectroscopy of different nuclei using a single universal concentration reference

One‐dimensional (1D) quantitative NMR (qNMR) is a useful tool for concentration determination due to its experimental simplicity and the direct proportionality of the integrated signal area to the number of nuclei spin. For complex mixtures, however, signal overlapping often in one‐dimensional quantitative ¹H NMR (1D ¹H qNMR) spectrum limits the accurate quantification of individual compound. Here, we introduced employing joint 1D qNMR methods of different nuclei, such as ¹H and ³¹P (or/and ¹⁹F), to quantify multiple compounds in a complex mixture using a single universal concentration reference. When the concentration ratio of several compounds containing different elements in a complex mixture is of interest, the result calculated from measured intensities from 1D qNMR of different nuclei is independent of the gravimetric error from the reference. In this case, the common reference also serves as a ‘quantitative bridge’ among these 1D qNMR of different nuclei. Quantitative analysis of choline, phosphocholine, and glycerophosphocholine mixture is given as an example using trimethylphosphine oxide ((CH₃)₃P(O)) as concentration reference. Compounds containing multiple elements, such as tetramethylammonium hexafluorophosphate (N⁺(CH₃)₄PF₆^?), are proposed as the common concentration reference for ¹H, ¹³C, ¹⁵N, ³¹P, and ¹⁹F qNMR for the quantitative analysis of complex mixture containing these different elements. We anticipate that the proposed joint 1D qNMR approach using a universal concentration reference will be a valuable alternative for simultaneous quantification of multiple compounds in a complex mixture due to its accuracy and single and simple sample preparation. Copyright © 2014 John Wiley & Sons, Ltd.     

自由基浓度测定方法的再验证及其在煤化学中应用

对前人建立的标准曲线法测煤中自由基浓度进行优化,以DPPH标准样品和基准样品的二次积分面积比值为新参数,结果显示新参数标准曲线法的实测值与理论值相对误差都在5%以内;重复性、复现性实验的相对标准偏差都小于3%。将新参数标准曲线法用于分析不同煤化程度煤和新疆黑山煤(HS)沥青质的自由基浓度,发现随着煤化程度增加,其煤中自由基浓度逐渐增大,从低阶褐煤的8.531×10~(17)/g上升到高阶无烟煤3.37899×10~(19)/g;而在HS煤液化过程中,随着加氢液化温度的升高,其沥青质自由基浓度逐渐下降,从290℃的1.5793×10~(18)/g降到450℃的7.410×10~(17)/g,沥青质自由基浓度变化趋势与其产率变化趋势相一致。     

Highly sensitive and rapid determination of tacrolimus in peripheral blood mononuclear cells by liquid chromatography–tandem mass spectrometry

After solid organ transplantation, tacrolimus is given to prevent rejection. Therapeutic drug monitoring is used to reach target concentrations of tacrolimus in whole blood. Because the site of action of tacrolimus is the lymphocyte, and tacrolimus binds ~80% to erythrocytes, the intracellular tacrolimus concentration in lymphocytes is possibly more relevant. For this purpose, we aimed to develop, improve and validate a UPLC–MS/MS method to measure tacrolimus concentrations in isolated peripheral blood mononuclear cells (PBMCs). PBMCs were isolated using a Ficoll separation technique, followed by a washing step using red blood cell lysis. A cell suspension of 50 μL containing 1 million PBMCs was used in combination with MagSiMUS‐TDM^PREP. To each sample we added 30 μL lysis buffer, 20 μL reconstitution buffer containing ¹³C²H₄‐tacrolimus as internal standard, 40 μL MagSiMUS‐TDM^PREP Type I Particle Mix and 175 μL Organic Precipitation Reagent VI for methanol‐based protein precipitation. A 10 μL aliquot of the supernatant was injected into the UPLC–MS/MS system. The method was validated, resulting in high sensitivity and specificity. The method was linear (r² = 0.997) over the range 5.0–1250 pg/1 × 10⁶ PBMCs. The inaccuracy was <5% and the imprecision was <15%. The washing steps following Ficoll isolation could be performed at either room temperature or on ice, with no effect of the temperature on the results. A method for the analysis of tacrolimus concentrations in PBMCs was developed and successfully validated. Further research will be performed to investigate the correlation between concentrations in PBMCs and clinical outcome.     

Investigation of molar concentration effect on structural,optical, electrical,and photovoltaic properties of spray‐coated Cu2O thin films

High quality copper oxide thin films were prepared by nebulizer spray pyrolysis technique using different concentrations of copper precursor solution. Concentration‐dependent structural, morphological, optical, and electrical properties of the prepared films are discussed. X‐ray diffraction studies done for the samples confirmed that the deposited films are in Cu₂O phase with polycrystalline cubic structure. Atomic force microscopy analysis revealed that all the films are composed of nano sheet shaped grains covering the substrate surface. Optical studies done on the samples showed band gap values 2.42, 2.31, and 2.02 eV for the solution concentration 0.01, 0.05, and 0.1 M, respectively. Photoluminescence spectral analysis showed the emission band at 620 nm confirming the formation of cuprous oxide. Electrical analysis of the films showed p‐type conductivity with a low resistivity 2.19 × 10² Ω.cm and high carrier concentration 16.76 × 10 ¹⁵ cm⁻³ for the molar concentration 0.1 M. In this work, Cu₂O/ZnO heterojunctions were also prepared, and solar cell properties were studied; they were found to show increased open circuit voltage and short circuit current for higher copper concentration.     

轮台白杏叶片铁锰浓度光谱估算模型

建立基于光谱分析的轮台白杏叶片铁(Fe)、锰(Mn)元素浓度估算模型,为快速建立轮台白杏树体微量营养元素诊断体系提供技术途经。采用Unispec-SC光谱仪测定土壤肥力存在显著差异条件下轮台白杏果实不同生育时期叶片的光谱反射率,通过分析叶片中Fe和Mn元素浓度与Rλ和f′(Rλ)的相关性,筛选出光谱指示波段,并采用线性回归模型建立光谱估算模型以估算叶片Fe和Mn营养元素浓度。结果表明:轮台白杏果实不同生育时期叶片Fe元素的光谱敏感波段各不相同,果实坐果期和硬核期敏感波段分别为873和874nm,375和437nm。果实成熟期敏感波段为836和837nm而果实收后期敏感波段为325和1 054nm;轮台白杏果实四个生育时期Mn元素的光谱敏感波段分别为913和1 129nm,425和970nm,390和466nm,423和424nm;轮台白杏叶片Fe和Mn元素浓度均与光谱反射率一阶微分f′(Rλ)相关性最强,与之建立的线性光谱估算模型拟合度最高,且达到了显著或极显著水平。表明果实不同生育时期,轮台白杏叶片Fe和Mn元素的光谱指示波段不同,可根据双波段f′(Rλ)采用线性模型估算白杏叶片Fe和Mn元素浓度。     

Effect of bovine serum albumin on the surface properties of ionic liquid-type Gemini surfactant

The effect of bovine serum albumin on the surface properties of IL-type gemini surfactant ([C₁₀-4-C₁₀im]Br₂), have been investigated by surface tension method. The critical micelle concentration (CMC) as a function of BSA concentrations at various temperatures was investigated. The CMC of [C₁₀-4-C₁₀im]Br₂ increases with increasing the concentration of BSA as well as the temperature of the system. The interfacial parameters viz; maximum surface excess concentration (Γ_max), the minimum area per molecule (A_min), and surface pressure at CMC (Π_cmc) were calculated. In addition, thermodynamic parameters of adsorption and micellization were evaluated by using surface tension data. The results indicated that the binding of [C₁₀-4-C₁₀im]Br₂ to BSA is spontaneous and exothermic in nature. The process is entropy driven and hydrophobic interactions are the major driving forces.     

A novel non-invasive electrochemical biosensing device for in situ determination of the alcohol content in blood by monitoring ethanol in sweat

A non-invasive, passive and simple to use skin surface based sensing device for determining the blood's ethanol content (BAC) by monitoring transdermal alcohol concentration (TAC) is designed and developed. The proposed prototype is based on bienzyme amperometric composite biosensors that are sensitive to the variation of ethanol concentration. The prototype correlates, through previous calibration set-up, the amperometric signal generated from ethanol in sweat with its content in blood in a short period of time. The characteristics of this sensor device permit determination of the ethanol concentration in isolated and in continuous form, giving information of the BAC of a subject either in a given moment or its evolution during long periods of time (8 h). Moreover, as the measurements are performed in a biological fluid, the evaluated individual is not able to alter the result of the analysis. The maximum limit of ethanol in blood allowed by legislation is included within the linear range of the device (0.0005–0.6 g L⁻¹). Moreover, the device shows higher sensitivity than the breathalyzers marketed at the moment, allowing the monitoring of the ethanol content in blood to be obtained just 5 min after ingestion of the alcoholic drink. The comparison of the obtained results using the proposed device in the analysis of 40 volunteers with those provided by the gas chromatographic reference method for determination of BAC pointed out that there were no significant differences between both methods.     

Fouling Mitigation in a Heat Exchanger: High Cycles of Concentration for a Cooling-Tower Application

The purpose of the present study is to investigate the effect of a physical water treatment (PWT) technology on fouling mitigation in a simulated cooling tower operating at high cycles of concentration. Hard water was produced by evaporating pure water in a circulating open cooling tower, where dissolved calcium carbonate ions became concentrated with time. Heat transfer tests were conducted in a rectangular channel by varying the cycle of concentration (COC) from 5 to 10, and fouling resistances were measured over 270 hrs for each case with and without the PWT treatment. Another test was conducted with no blowdown case with and without the PWT treatment. The fouling resistance at 5 cycles with the PWT treatment was about 70% less than that in the case without the PWT treatment at the end of 270-hr tests. Even at 10 cycles, the PWT treatment reduced the fouling resistance by 60% from the value for the no treatment case. Thus, one can conclude that the PWT technology can help circulating cooling-tower water at relatively high COC for significant freshwater conservation, while keeping fouling resistances below industry standards.     

Surface effects in the deformation of an anisotropic elastic material with nano-sized elliptical hole

We examine the effect of surface energy on an anisotropic elastic material weakened by an elliptical hole. A closed-form, full-field solution is derived using the standard Stroh formalism. In particular, explicit expressions for the hoop stress, normal, in-plane tangential and out-of-plane displacement components along the edge of the hole are obtained. These expressions clearly demonstrate the effect of elastic anisotropy of the bulk material on the corresponding field variables. When the material becomes isotropic, the hoop stress agrees with the well-known result in the literature while both the in-plane tangential and out-of-plane displacements vanish and the normal displacement is constant along the entire boundary of the elliptical hole.