减反膜对单晶硅太阳能电池性能的影响分析

在太阳能电池效率的评价中，电池材料、掺杂浓度、扩散长度等都是比较重要的参数，合理地改变相关参数可以优化太阳能电池的性能，提高电池效率。此外，在太阳能电池表面镀一层具有减反作用的光学薄膜（简称减反膜）也是提高电池效率的重要手段。以提高电池效率为目标，对单晶硅太阳能电池的掺杂浓度和扩散长度等微观参数进行计算优化，分析了掺杂浓度和扩散长度变化对电池效率的影响。并在此基础上分析了不同类型的减反膜对于电池效率的影响，给出了最佳减反膜材料及其膜系厚度，并且结合镀膜后电池量子效率的变化验证了其准确性。结果表明，在优化电池掺杂浓度和扩散长度的基础上，选择合适的减反膜，电池效率最高可达20.35%，相比于优化前提高了8.25%。     

N-doped porous carbon nanofibers sheathed pumpkin-like Si/C composites as free-standing anodes for lithium-ion batteries

Dramatic capacity fading and poor rate performance are two main obstacles that severely hamper the widespread application of the Si anode owing to its large volume variation during cycling and low intrinsic electrical conductivity.To mitigate these issues,free-standing N-doped porous carbon nanofibers sheathed pumpkin-like Si/C composites(Si/C-ZIF-8/CNFs)are designed and synthesized by electrospinning and carbonization methods,which present greatly enhanced electrochemical properties for lithium-ion battery anodes.This particular structure alleviates the volume variation,promotes the formation of stable solid electrolyte interphase(SEI)film,and improves the electrical conductivity.As a result,the as-obtained free-standing Si/C-ZIF-8/CNFs electrode delivers a high reversible capacity of 945.5 mAh g^-1 at 0.2 A g^-1 with a capacity retention of 64% for 150 cycles,and exhibits a reversible capacity of 538.6 mA h g^-1 at 0.5 A g^-1 over 500 cycles.Moreover,the full cell composed of a freestanding Si/C-ZIF-8/CNFs anode and commercial LiNi_1/3Co_1/3Mn_1/3O₂(NCM)cathode shows a capacity of 63.4 mA h g^-1 after 100 cycles at 0.2 C,which corresponds to a capacity retention of 60%.This rational design could provide a new path for the development of high-performance Si-based anodes.     

两例相同混合配体构筑的Pb(Ⅱ)/Ag(I)配位聚合物及其荧光性质

多齿配体2-咪唑乙酸(Hima)、4,4'-连吡啶分别与金属盐Pb(NO₃)₂和AgNO₃反应,得到[Pb₂(4,4'-bipy)(ima)(NO₃)₃]_n(1, 3D framework)和[Ag₄(4, 4'-bipy)₃(ima)₂(NO₃)₂(H₂O)₂]_n(2, 3D framework)两个配位聚合物。根据配位聚合物的结构特点,研究了这两个配位聚合物荧光性质等物理化学性能。配位聚合物1在最大激发波长(λ_ex=346 nm)激发下,荧光的最大发射波长为552 nm,配位聚合物2在最大激发波长(λ_ex=369 nm)激发下,荧光的最大发射波长为444 nm。这可能是由于金属和配体之间发生了电荷转移(LMCT)。     

n-In0.35Ga0.65N/p-Si异质结的制备及其电学性能研究

采用双光路双靶材脉冲激光沉积(PLD)系统在p-Si衬底上外延生长InGaN薄膜,研究了InGaN薄膜的显微组织结构和n-InGaN/p-Si异质结的电学性能。研究表明,InGaN薄膜为单晶结构,沿[0001]方向择优生长,薄膜表面光滑致密,In的原子含量为35%。霍尔(Hall)效应测试表明In_0.35Ga_0.65N薄膜呈n型半导体特性,具有高的载流子浓度和迁移率及低的电阻率。I-V曲线分析表明In_0.35Ga_0.65N/p-Si异质结具有良好的整流特性,在±4 V时的整流比为25,开路电压为1.32 V。In_0.35Ga_0.65N/p-Si异质结中存在热辅助载流子隧穿和复合隧穿两种电流传输机制。经拟合,得到异质结的反向饱和电流为1.05×10^-8 A,势垒高度为0.86 eV,理想因子为6.87。     

共振瑞利散射法对普萘洛尔特效适配体系的手性分析

本文提出了对于手性药物普萘洛尔手性识别和手性分析的新方法。 该方法引用基于氧化石墨烯的指数富集配体系统进化筛选技术(GO-SELEX),经过10轮优化筛选出对心血管药物普萘洛尔有高度亲和力的特效适配体。 然后通过共振瑞利散射光谱法(RRS)对反应体系进行特效性检测,实验表明S-普萘洛尔和R-普萘洛尔有迥然不同的光谱差异,S-普萘洛尔与特效适配体结合后的RRS显著增强,而R-普萘洛尔与适配体结合后的RRS几乎没有变化。 据此可以对心血管药物手性普萘洛尔进行有效的手性识别。 在考察反应体系和实验条件的基础上,可对S-普萘洛尔进行实验检测,同时对外消旋体中的R-普萘洛尔进行计算分析。 实验对S-普萘洛尔的线性范围为5~275 nmol/L,检测限为0.5 nmol/L。 方法应用于外消旋药片的分析检测,结果令人满意。 实验表明,RRS检测特效适配体结合的手性靶标体系会彰显不同的光谱差异,从而可对手性对映体进行手性识别,尤其是可利用其光谱差异实现同时测定的手性分析,方法可在特殊情形下不经分离而同时测定手性对映体,具有推广应用价值。     

Effect of defects on the electronic structure of a PbI2/MoS2 van der Waals heterostructure: A first-principles study

PbI2/MoS2,as a typical van der Waals(vdW)heterostructure,has attracted intensive attention owing to its remarkable electronic and optoelectronic properties.In this work,the effect of defects on the electronic structures of a PbI2/MoS2 heterointerface has been systematically investigated.The manner in which the defects modulate the band structure of PbI2/MoS2,including the band gap,band edge,band alignment,and defect energy-level density within the band gap is discussed herein.It is shown that sulfur defects tune the band gaps,iodine defects shift the positions of the band edge and Fermi level,and lead defects realize the conversions between the straddling-gap band alignment and valence-band-aligned gap,thus enhancing the light-absorption ability of the material.     

Advances in high carbon dioxide separation performance of poly(ethylene oxide)-based membranes

Poly(ethylene-oxide)(PEO)-based membranes have attracted much attention recently for CO2 separation because CO2 is highly soluble into PEO and shows high selectivity over other gases such as CH4 and N2.Unfortunately,those membranes are not strong enough mechanically and highly crystalline,which hinders their broader applications for separation membranes.In this review discussions are made,as much in detail as possible,on the strategies to improve gas separation performance of PEO-based membranes.Some of techniques such as synthesis of graft copolymers that contain PEO,cross-linking of polymers and blending with long chains polymers contributed significantly to improvement of membrane.Incorporation of ionic liquids/nanoparticles has also been found effective.However,surface modification of nanoparticles has been done chemically or physically to enhance their compatibility with polymer matrix.As a result of all such efforts,an excellent performance,i.e.,CO2 permeability up to 200 Barrer,CO2/N2 selectivity up to 200 and CO2/CH4 selectivity up to 70,could be achieved.Another method is to introduce functional groups into PEO-based polymers which boosted CO2 permeability up to 200 Barrer with CO2/CH4 selectivity between 40 and 50.The CO2 permeability of PEO-based membranes increases,without much change in selectivity,when the length of ethylene oxide is increased.     

黏弹性接触界面端附近的奇异应力场

研究蠕变加载条件下线黏弹性材料接触界面端附近的奇异应力场问题.考虑接触界面的摩擦,假设界面端的滑移方向不改变,相对滑移量微小,且其与位移同量级,由此线性化局部边界条件,根据对应原理得到Laplace变换域中的界面端应力场,导出时域中奇异应力场的卷积积分表达式.对卷积积分核函数进行数值反演,考虑接触材料的两类组合,一是持久模量具有量级上的差异,另一是持久模量接近相同.算例结果证实核函数可以用准弹性法求得的解析式较准确地近似.在此基础上,利用积分中值定理,并引入各应力分量的修正系数,得到黏弹性奇异应力场的简化式.结合核函数的数值反演结果分析修正系数表达式的取值范围,得到如下结论,若两相接触材料的持久模量相差很大,可以采用准弹性解的解析式较准确地描述界面端的奇异应力场;一般情况下,应力场不存在统一的奇异值和应力强度系数,当采用类似于准弹性解的表达式近似给出黏弹性应力场时,可以估计此近似描述的误差限.文中最后采用有限元分析黏弹性板端部嵌入部位的应力场,算例包括了黏弹性板与弹性金属支承、黏弹性板与黏弹性垫层所形成的滑移接触界面端,利用黏弹性有限元的数值结果验证理论分析所得结论的有效性.      

冷轧成型Al/Ni多层复合材料力学行为与冲击释能特性研究

基于冷轧成型工艺，采用不同的轧制道次制备Al/Ni多层复合材料。开展了Al/Ni多层复合材料准静态压缩和准密闭二次撞击反应实验，对它的力学性能和冲击释能特性进行测试。同时，通过扫描电镜得到了材料的细观结构特性，分析了Al/Ni多层复合材料细观特性对宏观力/化学行为的影响机制。结果表明，基于冷轧技术制备的Al/Ni多层复合材料比粉末压制而成的Al/Ni复合材料塑性更强，材料的抗压强度总体随冷轧次数的增加呈上升趋势。另外，冷轧3～5道次的Al/Ni多层复合材料的准密闭二次撞击反应实验表明，材料在相同的撞击速度(800～1 500 m/s)下释放的化学能随着轧制道次的增加而逐渐降低。