基于NiCo2O4纳米片电极的非对称混合电容器

The looming global energy crisis and ever-increasing energy demands have catalyzed the development of renewable energy storage systems. In this regard, supercapacitors (SCs) have attracted widespread attention because of their advantageous attributes such as high power density, excellent cycle stability, and environmental friendliness. However, SCs exhibit low energy density and it is important to optimize electrode materials to improve the overall performance of these devices. Among the various electrode materials available, spinel nickel cobaltate (NiCo₂O₄) is particularly interesting because of its excellent theoretical capacitance. Based on the understanding that the performances of the electrode materials strongly depend on their morphologies and structures, in this study, we successfully synthesized NiCo₂O₄ nanosheets on Ni foam via a simple hydrothermal route followed by calcination. The structures and morphologies of the as-synthesized products were characterized by X-ray diffraction, scanning electron microscopy, and Brunauer-Emmett-Teller (BET) surface area analysis, and the results showed that they were uniformly distributed on the Ni foam support. The surface chemical states of the elements in the samples were identified by X-ray photoelectron spectroscopy. The as-synthesized NiCo₂O₄ products were then tested as cathode materials for supercapacitors in a traditional three-electrode system. The electrochemical performances of the NiCo₂O₄ electrode materials were studied and the area capacitance was found to be 1.26 C·cm^-2 at a current density of 1 mA·cm^-2. Furthermore, outstanding cycling stability with 97.6% retention of the initial discharge capacitance after 10000 cycles and excellent rate performance (67.5% capacitance retention with the current density from 1 to 14 mA·cm^-2) were achieved. It was found that the Ni foam supporting the NiCo₂O₄ nanosheets increased the conductivity of the electrode materials. However, it is worth noting that the contribution of nickel foam to the areal capacitance of the electrode materials was almost zero during the charge and discharge processes. To further investigate the practical application of the as-synthesized NiCo₂O₄ nanosheets-based electrode, a device was assembled with the as-prepared samples as the positive electrode and active carbon (AC) as the negative electrode. The assembled supercapacitor showed energy densities of 0.14 and 0.09 Wh·cm^-3 at 1.56 and 4.5 W·cm^-3, respectively. Furthermore, it was able to maintain 95% of its initial specific capacitance after 10000 cycles. The excellent electrochemical performance of the NiCo₂O₄ nanosheets could be ascribed to their unique spatial structure composed of interconnected ultrathin nanosheets, which facilitated electron transportation and ion penetration, suggesting their potential applications as electrode materials for high performance supercapacitors. The present synthetic route can be extended to other ternary transition metal oxides/sulfides for future energy storage devices and systems.     

立方相KNbO3晶体本征空位点缺陷的电子结构研究

利用第一性原理从头计算方法对立方相KNbO3晶体的肖特基缺陷的稳定性、能带结构、电子态密度和磁性性质进行了研究.发现含本征点缺陷的KNbO3体系结构稳定;K,Nb空位诱导KNbO3缺陷晶体产生铁磁性;O空位则无此性质.K空位诱导KNbO3缺陷晶体磁性源于O原子2p轨道退简并;Nb空位诱导KNbO3缺陷晶体磁性源于O-2p电子极化.     

基于有序介孔碳的氯离子选择性电极的制备及其在手持传感系统中的应用

以有序介孔碳(OMC)球为离子-电子转换层,制备了固态氯离子选择性电极,构建了基于离子敏感的场效应晶体管(ISFET)的手持式传感系统,用于检测人体血清中的氯离子。优化了OMC前驱体的碳化温度,探究了OMC形貌结构对电极传感性能的影响;电极柔性化制备后考察了其在手持系统中对氯离子的检测效果。结果表明,最优条件下,电极在5.12×10^-4~1.02 mol/L的浓度范围呈现线性响应,响应斜率为60 mV/decade。该柔性电极在手持传感系统中展现出高灵敏度和重现性,可用于人体血清样品中氯离子的检测,其回收率为96.3%~104.9%。     

爆炸荷载下沉箱重力式码头模型毁伤效应

在野外条件下开展了不同爆炸荷载条件下沉箱重力式码头模型毁伤效应实验，得到了沉箱重力式码头模型在1 kg TNT当量空中爆炸、水下爆炸以及结构内部爆炸后的毁伤模式，并针对不同毁伤模式给出了相应的抢修建议。实验结果表明:空中爆炸荷载下码头仅面板局部破坏形成爆坑；水下爆炸荷载下码头迎爆面及相近区域形成大量裂缝；结构内部爆炸荷载下码头仓格大变形破坏且中间面板被掀飞；从横向对比来看，在相同爆炸当量下空中爆炸荷载下码头毁伤程度最小，结构内部爆炸荷载下码头毁伤程度最大。     

保温层结构对感应加热制备太阳能级多晶硅影响的数值模拟研究

定向凝固技术是制备太阳能级多晶硅的主要制备技术.在该技术路线之中,优化多晶铸锭炉的热场结构和控制硅熔体的对流形态是获得高品质多晶硅的有效途径之一.本文设计了三种热场保温层,通过分析不同保温层下坩埚内硅熔体的热场、流场、固液界面、氧含量等的变化,确定了优化的保温层结构.研究发现,在传统固化碳毡保温层中引入石墨层可以使多晶炉内形成两个“热源”,提高多晶炉的热效率,使其能耗降低了38.5;;在洛伦兹力的作用下硅熔体中仅存在一个上下贯通的涡流,有利于硅中杂质原子的挥发.同时,添加石墨保温层后固液界面的形状由“W”状转变为凹状,其上的氧含量有所降低,并且V/Gn值在整个固液界面范围内均大于临界值,可以有效抑制氧沉淀.可见,在感应加热多晶硅生长系统中,采用固化碳毡+石墨保温层时,有利于降低多晶硅的生产成本并提高多晶硅的品质.     

GGA+U法研究稀土(La、Ce、Pr、Nd)掺杂对ZnO电子结构和光学性质的影响

基于GGA+U的第一性原理方法,分析了La、Ce、Pr、Nd四种元素掺杂的ZnO结构,对晶体的结构、电子结构和光学性质进行了对比分析.由键布局分析可知,掺杂体系Zn-O键共价性的强弱与杂质掺入原子的序数成正比.掺杂后体系的类型仍为直接跃迁,能级整体下移;随着Pr、Nd掺入,出现了杂质能级,这是由稀土元素的4f电子态所导致.在光学性质方面,掺杂体系的吸收系数、静介电常数都比纯ZnO的高,体系的吸收边都向低能方向移动,其中Zn7LaO8的红移程度最高、静介电常数最大,说明其光催化能力和极化能力都最强.     

卟啉基非金属纳米片用于可见光光催化制氢

本文基于密度泛函理论预测了一种用于可见光范围光催化制氢的新型二维非金属纳米材料，该材料可以由HTAP分子脱氢聚合得到，具有良好的结构稳定性，且带隙为2.12 eV，可以实现可见光区域的光捕获. 材料的带边能级位置恰好包裹水的氧化还原电位，有利于实现全光解水. 电子的迁移率略高于空穴的迁移率，有利于光生载流子的分离. 光生电子可以提供足够的驱动力使得析氢反应自发进行.     

偏缠绕模的Frobenius性质

主要给出了偏缠绕模的Frobenius性质，推广了缠绕模相应的性质。     

零误差计算

研究采用有误差的数值计算来获得无误差的准确值具有重要的理论价值和应用价值.这种通过近似的数值方法获得准确结果的计算被称为零误差计算.本文首先指出,只有一致离散集合中的数才能够开展零误差计算,即有非零隔离界的数集,这也是"数"可以进行零误差计算的一个充要条件.以此为基本出发点,本文分析代数数零误差计算的最低理论精度,该精度对应于恢复近似代数数的准确值时必要的误差控制条件,但由于所采用恢复算法的局限性,这一理论精度往往不能保证成功恢复出代数数的准确值.为此,本文给出采用PSLQ (partial-sum-LQ-decomposition)算法进行代数数零误差计算所需的精度控制条件,与基于LLL (Lenstra-Lenstra-Lovász)算法相比,该精度控制条件关于代数数次数的依赖程度由二次降为拟线性,从而可降低相应算法的复杂度.最后探讨零误差计算未来的发展趋势.