一种新颖高效的气体发生器

针对启普发生器使用过程中存在液体使用量大、反应溶液利用效率低、安全性差等问题，研制了一种新型的气体发生器。该装置由储液杯、流量调节器、排气管和反应容器组成。利用流量调节器将反应液滴加到固体药品上，固-液反应充分，排出的废液基本不含反应试剂，大大减少了液体药品的用量。实验结果表明，该新型制气装置具有液体试剂用量少、利用效率高、安全性能优良、操作方便，同时兼具随开随用等特点，可有效地应用于化学实验教学中。     

一道课本例题的教学与思考

上海一期课改高中数学课本二年级第二学期第88页有这样一道例题：等比数列的S4=-20，S8=-1640，求a1与q．     

用于120～150℃蒸汽生产的超高温空气源自由活塞斯特林热泵性能研究

现有高温工业蒸汽主要产自于化石燃料燃烧,为减少碳排放和提高能源利用率,需提高可再生能源电力占比,同时开发一种高效、环保的电驱动超高温热泵系统代替传统化石能源蒸汽锅炉。本文针对一种用于产生高温蒸汽的电驱动空气源自由活塞斯特林热泵,基于SAGE软件对其在不同压力、频率和大温差情况下的性能进行了计算研究。研究表明,该系统在大温差供热领域性能优良;在环境温度20℃、供热温度120℃、工作频率45 Hz和平均压力8 MPa的工况条件以及1500 W的热端供热量目标下,系统整机供热系数达2.5,相对卡诺效率63.6%。     

微波辐射下4-硫胸腺嘧啶核苷的合成研究

提出了一种高效合成3’,5’-O-二乙酰基-4-硫胸腺嘧啶核苷的方法,该方法具有反应时间短、操作简便等优点,目标产物产率可达93.9%以上。以二氧六环做溶剂,反应温度102℃,乙酰化胸腺嘧啶核苷与P2S5的摩尔比为1∶1.2,微波功率700W辐射8分钟,即可高收率得到3’,5’-O-二乙酰基-4-硫胸腺嘧啶核苷。     

ICP-AES法测定茶叶中As,Cd,Ni,Pb等元素的含量

目的对样品前处理、酸度及茶叶中共存元素干扰的影响等因素进行探讨,方法用微波消解前处理样品,ICP-AES法同时测定茶叶中铅(Pb)、砷(As)、镉(Cd)、镍(Ni)等元素含量。结果该法的回收率在84.5%～115%之间,精密度RSD均小于9%,结论该法能满足茶叶测定要求。     

应用ICP-MS测定市售红葡萄酒中重金属元素的含量

目的随着对葡萄酒功效的认识,它逐渐成为普通人喜欢的饮品,所以对葡萄酒中各种成分的研究也成了热点。方法借助先进的ICP-MS技术对4种葡萄酒中的各种重金属和微量元素进行测定。结果金属元素质量浓度由高到低顺序为:As,Cr,Pb,Cd,As最高不超过0.5μg.mL-1,结论符合国家食品卫生标准。     

磁性Fe3O4@SiO2@ZrO2对水中磷酸盐的吸附研究

合成了以Fe₃O₄为核,以SiO₂为壳的磁性纳米微粒（Fe₃O₄@SiO₂）,并采用沉淀沉积法将ZrO₂包覆到材料表面。通过XRD、TEM、XPS和N₂吸附/脱附等手段对材料进行表征,结果表明材料Fe₃O₄@SiO₂@ZrO₂上沉积了氧化锆纳米颗粒,具有超顺磁性,可在外加磁场作用下实现从水中快速分离。同时系统研究了材料对水中磷酸盐的吸附行为,结果表明沉积ZrO₂使得材料对磷酸盐表现出良好的吸附性能,并且随着沉积量的增大吸附量增加。吸附等温线可用Freundlich方程拟合。吸附动力学可用拟二级动力学模型拟合,吸附速率随初始浓度增加而减缓。磷酸盐吸附量随溶液pH值的增大而减小,但几乎不受离子强度影响。     

Electronic and optical properties of 3N-doped graphdiyne/MoS2 heterostructures tuned by biaxial strain and external electric field

The construction of van der Waals (vdW) heterostructures by stacking different two-dimensional layered materials have been recognised as an effective strategy to obtain the desired properties. The 3N-doped graphdiyne (N-GY) has been successfully synthesized in the laboratory. It could be assembled into a supercapacitor and can be used for tensile energy storage. However, the flat band and wide forbidden bands could hinder its application of N-GY layer in optoelectronic and nanoelectronic devices. In order to extend the application of N-GY layer in electronic devices, MoS₂ was selected to construct an N-GY/MoS₂ heterostructure due to its good electronic and optical properties. The N-GY/MoS₂ heterostructure has an optical absorption range from the visible to ultraviolet with a absorption coefficient of 10⁵ cm^-1. The N-GY/MoS₂ heterostructure exhibits a type-Ⅱ band alignment allows the electron-hole to be located on N-GY and MoS₂ respectively, which can further reduce the electron-hole complexation to increase exciton lifetime. The power conversion efficiency of N-GY/MoS₂ heterostructure is up to 17.77%, indicating it is a promising candidate material for solar cells. In addition, the external electric field and biaxial strain could effectively tune the electronic structure. Our results provide a theoretical support for the design and application of N-GY/MoS₂ vdW heterostructures in semiconductor sensors and photovoltaic devices.     

In-situ TEM observation of the evolution of helium bubbles in Mo during He+ irradiation and post-irradiation annealing

The evolution of helium bubbles in purity Mo was investigated by in-situ transmission electron microscopy (TEM) during 30 keV He⁺ irradiation (at 673 K and 1173 K) and post-irradiation annealing (after 30 keV He⁺ irradiation with the fluence of 5.74×10¹⁶ He⁺/cm² at 673 K). Both He⁺ irradiation and subsequently annealing induced the initiation, aggregation, and growth of helium bubbles. Temperature had a significant effect on the initiation and evolution of helium bubbles. The higher the irradiation temperature was, the larger the bubble size at the same irradiation fluence would be. At 1173 K irradiation, helium bubbles nucleated and grew preferentially at grain boundaries and showed super large size, which would induce the formation of microcracks. At the same time, the geometry of helium bubbles changed from sphericity to polyhedron. The polyhedral bubbles preferred to grow in the shape bounded by {100} planes. After statistical analysis of the characteristic parameters of helium bubbles, the functions between the average size, number density of helium bubbles, swelling rate and irradiation damage were obtained. Meanwhile, an empirical formula for calculating the size of helium bubbles during the annealing was also provided.     

超临界CO2-DME混合物竖直圆管内传热特性数值研究

本文采用RNG k-ε湍流模型对超临界CO₂/DME(二甲醚)二元混合工质在竖直圆管内的传热特性进行了数值模拟研究。管径4 mm,管长为1000 mm;CO₂/DME浓度配比分别为97/3、95/5、92/8、90/10、85/15、以及70/30;质量流速为125~200 kg·m^-2.s^-1;热流密度为15~30 kW.m^-2,入口温度295~308 K,入口压力8~15 MPa。不同浓度配比的混合工质在各自临界压力下应用时,随着DME浓度的增加,换热系数的峰值逐渐减低,但在温度大于310 K时混合工质的换热系数会高于纯CO₂。压力相同时,随着DME浓度的增大,拟临界温度升高,换热系数峰值点也随之向温度升高的方向移动。混合工质的换热系数随质量流速的增大而增大。在拟临界点前,增大热流密度及降低压力对管内传热有利,而在拟临界点之后,换热系数随热流密度的升高以及压力的降低而降低。