熵驱大分子胶体粒子的柱状受限结晶

熵是物理化学的基本状态参量,在统计力学和热力学中处于核心位置.按照玻尔兹曼的微观解释,熵可以由孤立系统微观状态的数目(W)给出,即S=kBlnW,这里kB为玻尔兹曼常数[1,2].根据此公式,微观状态数越多,系统越混乱,熵越大,所以熵常被视作体系无序程度的度量.但熵增仅对应体系微观状态数的增加,与可观测的结构有序程度无关[3~5].在一些典型的软物质体系中,结构越有序熵反而越大,如胶体硬球在随机密堆积点的有序结晶[6]及描述各向异性棒状分子从各向同性相到向列相转变的Onsager原理[7].     

偶氮苯高分子的光致可逆固液转变

偶氮苯化合物是一种极具吸引力以及较为常用的光响应材料,本文主要介绍偶氮苯的光响应性质以及一些偶氮苯高分子的合成方法,解析光化学反应导致偶氮苯高分子固液转变的机理,并介绍其在粘结性材料、光致动器、光致热导开关器件及非热纳米压印中的应用。     

基于偶氮苯衍生物的三阶非线性光开关性能的调控

偶氮苯衍生物因其具有特殊的共轭体系常用作光开关特性的三阶非线性光学（NLO）开关材料,但有部分带有特殊基团的偶氮类分子在一般条件下无法显示其性能.然而,这类分子在被调节之后能展示出优异的光控的NLO开关性能.以无光控的NLO开关性能的5-（N-4-偶氮苯基）氨甲基间苯二甲酸为研究对象,并对其潜在的光控NLO开关性能进行调控.经过调节后的这类分子在光照条件下能顺利地经历可逆的顺反异构化反应,且产生三阶非线性性能的转换.其Z-扫描实验结果显示处于反式构型的材料展示出反饱和吸收和自散焦特性;在光照之后,这类材料转化为顺式构型并展现出饱和吸收和自聚焦行为.三阶NLO性能的转换是由于材料的结构发生转变其内部电子产生重排,使得它们在激光刺激下产生不同的响应机制.     

脉冲熔融-飞行时间质谱法测定Ti-Al合金中Ar

本文以标准气体参考物质为依据绘制Ar校准曲线,利用脉冲熔融-飞行时间质谱法建立准确测定钛铝合金中Ar的方法。程序升温法确定钛铝合金中氩可以在分析功率为2800 W时完全释放。并对比了助熔剂和称样量等分析条件对实验结果的影响,结果表明,采用高纯镍篮,钛铝合金中Ar释放完全。本方法测定值与传统脉冲熔融-热导法测定结果基本一致。     

灰中酸性成分对灰熔融温度的影响

搜集并统计了世界129种典型煤种、城市污水污泥及污泥/煤混烧灰样的灰成分及灰熔融特征温度等相关数据,研究灰中酸性成分SiO2、Al2O3、TiO2和P2O5对灰熔融特性的影响。结果表明,Al2O3是决定灰熔点的主要因素,酸性金属氧化物SiO2、Al2O3和TiO2形成的耐熔矿物质石英、偏高岭石、莫来石、金红石等可提高灰熔点。非金属氧化物P2O5与污泥和污泥/煤的灰熔点FT二次拟合很好且明显降低熔点,污泥灰中P2O5含量显著高于煤灰是导致其熔点明显低于煤的重要原因。     

Toughening of polycarbonate through reactive melt blending: Effect of hydroxyl content and viscosity of hydroxyl-terminated polydimethysiloxane

In this study, four hydroxyl-terminated polydimethylsiloxanes(PDMSOH) with different viscosities and hydroxyl contents were used to improve the toughness of polycarbonate(PC) through reactive melt blending. A largely improved toughness of PC has been achieved, and the low temperature toughness of PC/PDMSOH blends could overtake that of PC homopolymer in much higher temperatures(e.g.-10 °C versus 23 °C). Moreover, it was found that the more the hydroxyl content, the less the PDMSOH was needed to reach the highest toughness, suggesting that equivalent molar ratio between the carbonyl group content of PC and the hydroxyl group content of PDMSOH was required for the toughening of PC. Ultraviolet spectrophotometry was used to analyze the possible reaction between PC and PDMSOH. Contact angle was measured to assess the change of interfacial interaction between PC and PDMSOH as change of viscosity and hydroxyl content. The formation of PC-co-PDMSOH copolymer was believed to be the key for the toughening effect. This work gives a profound recommendation of the optimum kind and dosage of PDMSOH which should be used to improve the toughness of PC and will find immediate industrial applications.     

Influence of different inorganic salts on crystallization-driven morphological transformation of PCL-b-PEO micelles in aqueous solutions

Different inorganic salts, including NaSCN, NaCl, MgCl2 and Na2SO4, were added into the aqueous solution containing poly(ε-caprolactone)-b-poly(ethylene oxide)(PCL-b-PEO) semicrystalline micelles. The effects of inorganic salt on the micellar size and morphology were investigated with TEM and DLS. It is found that addition of NaSCN leads to increase of the micellar size, but the micelles remain to be spherical. By contrast, the other three inorganic salts can induce sphere-to-cylinder or sphere-to-lamella transformations of the PCL-b-PEO semicrystalline micelles. The alteration rate of the micellar size with the time after addition of the inorganic salts decreases in the following order: Na2SO4 NaCl ≈ MgCl2 NaSCN. These results were interpreted in terms of the "salting-out" ability of the cations and anions. The anions SO42- and Cl- have a stronger "salting-out" ability, driving the morphological transformations of the micelles and leading to a rapid change in micellar size. By contrast, SCN- has a weaker salting-out" ability. The cations Na+ and Mg2+ may associate with the PEO blocks, leading to a "salting-out" effect as well. However, the "salting-out" ability of cations is weaker than that of SO42- and Cl- anions, and the "salting-out" abilities of Na+ and Mg2+ are similar.     

Studies on crystal transition of polyamide 11 nanocomposites by variable-temperature X-ray diffraction

Polyamide I1 （PAll） and its nanocomposites with different organoclay loadings were prepared by melt-compounding and subsequent pelletizing. The crystal phase transitions of PAl 1 and its clay nanocomposites were investigated by variable-temperature X-ray diffraction. It was found that the Brill transition of the nanocomposite was 20 K higher than that of the neat PAl 1 for both heating and cooling processes. The PAl 1 d-spacings of the nanocomposites were observed to be smaller than those of the neat PAl 1 for melt crystallization. The constraints imposed by the addition of layered clay, restricting the thermal expansion of the polymer chains, are probably responsible for such a reduction of the d-spacing.     

复杂应力状态下GCr15轴承钢的动态剪切及熔融特性研究

本文探究了GCr15轴承钢压剪试样在冲击载荷下的绝热剪切和熔融破坏特性．首先,实验研究发现GCr15轴承钢的力学性能具有拉-压不对称性、应力状态及应变率敏感性．因此,通过引入应力三轴度、洛德角、应变率和绝热剪切温升机制扩展了经典J-C本构模型,并对GCr15轴承钢的动态单轴压缩和压剪试验结果进行了数值实现．研究结果表明,应力三轴度和洛德角是影响动态冲击下压剪试样的绝热剪切产生和熔融特性的重要因素．     

状态转变增强拉曼光谱

表面增强拉曼散射(SERS)是公认的超灵敏的光谱工具.和传统的优化SERS基底材料或构筑完美的结构策略相比,我们提出了一种极其简单和灵敏的方法,该方法被命名为状态转变增强拉曼光谱(STERS).这种STERS检测方法可广泛的应用于毒品安全检测、食品安全和环境保护等方面.如果我们把这种方法和便携式拉曼光谱仪结合,这种应用...