BEPC横向阻尼时间的测量

 利用逐束团测量系统在BEPC储存环中跟踪单个束团得到其多圈位置振荡信息，获得BEPC储存环的横向阻尼时间与束流流强、色品、八极子和束流能量的关系，并通过分析得到了BEPC储存环辐射阻尼时间为52 ms。实验结果表明：流强越高、色品越大，阻尼率也就越大；束流流强为4.7 mA时八极子强度的变化对阻尼率没有影响；束流流强为5 mA时，阻尼率随束流能量升高而减小。     

整体式担载型Pt基催化剂上航空煤油的裂解:助剂SrO和BaO的影响

考察了整体式担载型Pt基催化剂上国产3号航空煤油(RP-3)的常压裂解反应,着重探讨了添加BaO和SrO助剂对裂解效果的影响,以及裂解时间对积炭量的影响.采用全自动吸附仪、程序升温还原、X射线光电子能谱以及X射线衍射和扫描电镜等方法对催化剂进行了表征.结果表明,在整体式担载型Pt基催化剂上RP-3裂解的总产气量比热裂解提高了39.7%;BaO或SrO助剂的添加又使其总产气量又分别提高了25.6%和37.0%;同时添加BaO和SrO的催化剂,其催化裂解总产气量则提高了96.5%.BaO和SrO助剂均可有效地抑制积炭的生成,而两者间的协同作用,进一步抑制了RP-3催化裂解过程中积炭的生成.     

机器学习在大型粒子加速器中的应用回顾与展望

机器学习技术在近十几年发展迅猛,并被广泛地用于解决复杂的科学和工程问题。最近十年间,基于机器学习的粒子加速器相关研究也开始呈现出井喷式发展趋势。国际上许多加速器实验室开始尝试用机器学习和大数据技术处理加速器中的海量复杂数据,以期解决加速器及其子系统中的诸多物理和技术问题。不过,迄今为止,机器学习在加速器中的应用仍处于初步探索阶段,不同机器学习算法在解决具体加速器问题的效果及其适用范围尚待摸索,机器学习在实际加速器中的应用仍非常有限。因此,有必要对加速器领域中的机器学习研究做一个整体回顾和总结。将回顾机器学习在大型粒子加速器（以储存环加速器和直线加速器为主）中的加速器技术、束流物理以及加速器整体性能优化等研究方向中已取得的研究成果,并探讨机器学习在加速器领域的未来发展方向和应用前景。     

Suppression of the emittance growth induced by coherent synchrotron radiation in triple-bend achromats

The coherent synchrotron radiation (CSR) effect in a bending path plays an important role in transverse emittance dilution in high-brightness light sources and linear colliders, where the electron beams are of short bunch length and high peak current. Suppression of the emittance growth induced by CSR is critical to preserve the beam quality and help improve the machine performance. It has been shown that the CSR effect in a double-bend achromat (DBA) can be analyzed with the two-dimensional point-kick analysis method. In this paper, this method is applied to analyze the CSR effect in a triple-bend achromat (TBA) with symmetric layout, which is commonly used in the optics designs of energy recovery linacs (ERLs). A condition of cancelling the CSR linear effect in such a TBA is obtained, and is verified through numerical simulations. It is demonstrated that emittance preservation can be achieved with this condition, and to a large extent, has a high tolerance to the fluctuation of the initial transverse phase space distribution of the beam.     

Zr0.5Ti0.5O2的添加对超临界裂解RP-3催化剂性能的影响

采用共沉淀法制备了Zr_0.5Ti_0.5O₂载体材料,将其掺杂在CeO₂-Al₂O₃ (CA)基催化剂中, 并对其催化活性进行了超临界裂解测试, 采用全自动吸附仪、X射线衍射(XRD)、透射电镜(TEM)、程序升温脱附(TPD)等方法对催化剂进行了表征. 实验结果表明, 催化剂能够明显降低裂解反应的温度, 600 ℃ CA基催化剂产气率是热裂解的2.8倍, 掺杂Zr_0.5Ti_0.5O₂载体材料的CA基催化剂是热裂解的4.0倍, 650 ℃时, 掺杂Zr_0.5Ti_0.5O₂载体材料的CA基催化剂热沉提高了0.55 MJ·kg^-1. BET结果表明, 掺杂Zr_0.5Ti_0.5O₂载体后催化剂出现双孔结构, 部分小孔的出现使得乙烯的选择性提高; NH₃-TPD结果表明, 掺杂Zr_0.5Ti_0.5O₂载体材料后, 催化剂强酸位的酸量增加了4.0倍,催化剂表现出更强的表面酸性和更集中的强酸酸中心密度, 有利于裂解多产烯烃.     

衍射极限储存环物理设计研究进展

总结了国内外在衍射极限储存环(DLSR)物理设计方面的研究进展。为了在合理的周长范围内实现超低束流发射度,DLSR线性束流光学设计普遍采用紧凑型多二极铁消色散结构。在非线性动力学优化中,通常采用相移控制技术、解析和数值优化技术减小由色品六极铁导致的强非线性效应。DLSR束流接受度较小,主要考虑脉冲多极铁偏轴注入和快速冲击磁铁在轴注入两种注入方案。束流集体效应(尤其是束流内部散射和托歇克散射效应)随发射度降低而增强,需要采用束长拉伸、横向反馈等方法提高DLSR中束流的稳定性。     

第四代同步辐射光源物理设计与优化

近十年来,世界上开始大力发展第四代同步辐射光源——衍射极限储存环光源。目前我国正在建设或立项建设两台第四代同步辐射光源:高能同步辐射光源和合肥先进光源。从储存环磁聚焦结构设计与优化、束流注入与集体效应等方面,对第四代同步辐射光源的物理设计与优化进行了介绍;对国际范围内第四代储存环光源装置的研制情况进行了介绍。     

Intra-beam scattering studies for low emittance at BAPS

The target parameters of modern ultra-low emittance storage ring light sources are entering into a regime where intra-beam scattering (IBS) becomes important and, in the case of the Beijing Advanced Photon Source (BAPS), which is being designed at the Institute of High Energy Physics (IHEP), even a limitation for achieving the desired emittances in both transverse planes at the diffraction limit for X-ray wavelengths (≈10 pm). Due to the low emittance, the IBS effect will be very strong. Accurate calculations are needed to check if the design goal (ε_h+ε_v=20 pm) can be reached. In this paper, we present the results of numerical simulation studies of the IBS effect on a BAPS temporary design lattice.     

ATPF—a dedicated proton therapy facility

A proton therapy facility based on a linac injector and a slow-cycling synchrotron is proposed. To obtain good treatments for different cancer types, both the spot scanning method and the double-scattering method are adopted in the facility, whereas the nozzles include both gantry and fixed beam types. The proton accelerator chain includes a synchrotron of 250 MeV in maximum energy, an injector of 7 MeV consisting of an RFQ and a DTL linac, with a repetition rate of 0.5 Hz. The slow extraction using the third-order resonance and together with the RFKO method is considered to be a good method to obtain a stable and more-or-less homogenous beam spill. To benefit the spot scanning 200 between 60 MeV and 230 MeV. A new method method, the extraction energy can be as many as about - the emittance balancing technique of using a solenoid or a quadrupole rotator is proposed to solve the problem of unequal emittance in the two transverse planes with a beam slowly extracted from a synchrotron. The facility has been designed to keep the potential to be upgraded to include the carbon therapy in the future.     

Evolutionary genetic optimization of the injector beam dynamics for the ERL test facility at IHEP

The energy recovery linac test facility （ERL-TF）, a compact ERL-FEL （free electron laser） two-purpose machine, has been proposed at the Institute of High Energy Physics, Beijing. As one important component of the ERL-TF, the photo-injector was designed and preliminarily optimized. In this paper an evolutionary genetic method, non-dominated sorting genetic algorithm II, is applied to optimize the injector beam dynamics, especially in the high-charge operation mode. Study shows that using an incident laser with rms transverse size of 1-1.2 ram, the normalized emittance of the electron beam can be kept below 1 mm.mrad at the end of the injector. This work, together with the previous optimization of the low-charge operation mode by using the iterative scan method, provides guidance and confidence for future construction and commissioning of the ERL-TF injector.