Understanding the solubility and crystallization of molybdenum in high-sodium borosilicate glasses: effect of lanthanum oxide

Journal of Radioanalytical and Nuclear Chemistry - The simplified 8-oxide system (SiO2-B2O3-Na2O-Al2O3-CaO-TiO2-MoO3-La2O3) has been prepared under two types of cooling methods, and analyzed with...     

High-efficiency, environment-friendly electroluminescent polymers with stable high work function metal as a cathode: green- and yellow-emitting conjugated polyfluorene polyelectrolytes and their neutral precursors

A series of aminoalkyl-substituted polyfluorene copolymers with benzothiadiazole (BTDZ) of different content were synthesized by Suzuki coupling reaction, and their quaternized ammonium polyelectrolyte derivatives were obtained through a postpolymerization treatment on the terminal amino groups. Copolymers are soluble in environmentally friendlier solvents, such as alcohols. It was found that the efficient energy transfer occurs by exciton trapping on the narrow band gap BTDZ site under UV illumination. Only 1% of BTDZ content is needed to completely quench a fluorene emission for both the neutral and the quaternized copolymers in the neat film. Absolute PL efficiencies of copolymer films were greatly enhanced as a result of the suppression of excimer formation. Light-emitting devices fabricated from these copolymers show high external quantum efficiencies over 3% and 1% for the neutral precursor and the quaternized copolymers, respectively, with high work function metals such as Al as a cathode. To the best of our knowledge, this is the first report on an electroluminescent polymer which bears the high EL efficiency, the electron-injection ability from high work function metals, and the solubility in environment-friendly solvents at the same time. These features make them a promising candidate for the next generation of light-emitting copolymers in PLED flat panel display application.     

不同晶型和粒径的二氧化钛微粉对金属离子的吸附行为

考察了在流动注射的微柱分离富集体系中不同晶型和粒径的TiO2微粉对Cu2 , Cr3 , Mn2 , Ni2 , La3 , Eu3 , Ga3 , Mo(Ⅵ)和W(Ⅵ) 等金属离子的吸附pH条件及动态吸附容量, 并进行了比较; 初步探讨了TiO2微粉的吸附机制. 结果表明, 当TiO2的粒径大小相近时, 晶型对吸附容量的影响不可忽略; 当晶型相同时, 粒径的大小则起着重要的作用.     

丙烯选择氧化铋钼铁复氧化物催化剂组成,结构及性能的研究

采用XRD、Raman、XPS及催化剂性能评价等手段,考察了Bi_3(FeO_4)(MoO_4)_2和Fe_2(MoO_4)_3分别存在及两者共存时对Bi-Mo复氧化物体系催化性能的影响.结果表明,这两种含Fe物种的存在都有助于改善Bi-Mo系复氧化物催化剂对丙烯选择氧化反应的催化性能.但两者在作用机理上有所不同.Fe_2(MoO_4)_3本身无催化活性,但在反应条件下可部分还原为FeMoO_4形成Fe~(3+)/Fe~(2+)氧化还原对;且其地结构上与α-Bi_2(MoO_4)_3相匹配,这些因素都有助于促进催化体系中电子和氧物种的传递及催化剂表面活性中心的再生,从而提高催化性能.Bi_3(FeO_4)(MoO_4)_2在反应条件下也可形成Fe~(3+)/Fe~(2+)氧化还原对,但由于其Fe~(3-)所处的化学环境与Fe_2(MoO_4)_3很不相同,且Fe的含量也不及Fe_2(MoO_4)_3,因此它在促进催化体系中电子和氧物种的传递及催化剂表面活性中心的再生等方面的性能较差,但它对提高催化剂表面的活性中心(Bi-Mo对)数目有贡献.     

含二茂铁和吡啶单元的手性席夫碱配体在钌催化的不对称氢转移反应中的应用

Chiral Schiff base complexes are very efficient for a wide range of reactions, including expoxidation[1], epoxide ring opening[2], Diels-Alder reaction[3], aldol reaction[4], etc. However, there are only few examples of P-N chelate Schiff bases being used as the chiral ligands in the asymmetric transfer hydrogenation of ketones. Recently, Gao et al[5] reported a series of P,N,N,P Schiff base ligands that have relatively low enantioselectivity in the asymmetric transfer hydrogenation of ketones.     

毛细管区带电泳法快速测定复方布洛芬片的有效成分

研究了用毛细管区带电泳法快速测定复方布洛芬片中布洛芬和伪麻黄碱含量的方法。在０．０２５ｍｏｌ／Ｌ的磷酸盐缓冲液（ｐＨ８．１）中，上述两组分可在３ｍｉｎ内得以完全分离，用紫外检测器在２１０ｎｍ处检测，并以外标法定量。１１次测定含有９．５ｍｇ／Ｌ盐酸伪麻黄碱和６６．７ｍｇ／Ｌ布洛芬的试样溶液，相对标准偏差为２．９％（伪麻黄碱）和１．９％（布洛芬），回收率为１０３．１％（伪麻黄碱）和９７．６％（布洛芬）。应用毛细管区带电泳法测定复方布洛芬片剂的含量，所得结果与ＨＰＬＣ法一致。     

THE ADSORPTION OF OXYGEN OVER ThO_2-BaF_2 CATALYST

IntroductionInthcsclcctivcoxidationofalkanes.suchas'theoxidativccouplingofmcthanc(0CM)andthcoxidativcdch}'drogenationofcthanc(0DE)t0prcparccth}'lene.bothoxidcionsofthelatticeandtheox}'genspeciesovercataIystsuffocepla}'animportantrole.Althoughcxtcnsivcinvcstigationshavcbeengivcntothecharactcrizationofox}'gcnspccicsandthcreactionofox}'gcnspecicsx`ithalkanes,itisstilldifficulttosayt`hichoncsofox}'gcnspcciesarcthcactivcspecicsinthcactivation0falkancs.bccauscthenaturcofcatal}'stsandthecxperimcntc…     

BaF2/La2O3催化剂上甲烷氧化偶联反应活性氧物种的原位红外光谱

用原位红外光谱研究了BaF2/La2O3催化剂上甲烷氧化偶联反应的活性氧物种.结果表明,催化剂经O2预吸附后,在1 108~1 118 cm-1处出现超氧物种O2-的O-O键伸缩振动峰.经18O2同位素交换实验后,原1 108~1 118 cm-1处谱峰的强度减弱,同时在1 086和1 051 cm-1处出现(O18O)-物种和18O2-物种的吸收峰.同位素交换实验进一步确证了1 108~1 118cm-1处谱峰确为O2-物种的吸收峰.在700℃下,O2-物种能够活化CH4生成C2H4,而且O2-物种的消耗量和C2H4的生成量呈很好的消长对应关系.超氧物种O2-是BaF2/La2O3催化剂上甲烷氧化偶联反应的活性氧物种.     

~1H MAS NMR characterization of hydrogen over silica-supported rhodium catalyst

Hydrogen species in both SiO2 and Rh/SiO2 catalysts pretreated in different atmospheres (H2, O2, helium or air) at different temperatures (773 or 973 K) were investigated by means of 1H MAS NMR. In SiO2 and O2-pretreated catalysts, a series of downfield signals at -7.0, 3.8-4.0, 2.0 and 1.5-1.0 were detected. The first two signals can be attributed to strongly adsorbed and physisorbed water and the others to terminal silanol (SiOH) and SiOH under the screening of oxygen vacancies in SiO2 lattice, respectively. Besides the above signals, both upfield signal at -110 and downfield signals at 3.0 and 0.0 were also detected in H2-pretreated catalyst, respectively. The upfield signal at -110 originated from the dissociative adsorption of H2 over rhodium and was found to consist of both the contributions of reversible and irreversible hydrogen. There also probably existed another dissociatively adsorbed hydrogen over rhodium, which was known to be p hydrogen and in a unique form of "delocalized hydrogen". It wa     

Synthesis of functional microcapsules containing suspensions responsive to electric fields

A sort of functional microcapsules, which contain a suspension responsive to electric fields, is prepared by in situ polymerization of urea and formaldehyde. The suspension is made up of pigment phthalocyanine green (PPG) and tetrachloroethylene. In order to solve the particles' separation from the suspension during the microencapsulation and to obtain microcapsules applying to electronic ink display, the dispersibility of the particles, the contact angles between the particles and the tetrachloroethylene, and the influences of different emulsifiers on the microencapsulation are investigated. It is found that the dispersion extent and lipophilicity of the PPG particles are improved due to their surface modification with octadecylamine. The contact angles between the modified PPG particles and the tetrachloroethylene increase, and the PPG particles modified with 2 wt% octadecylamine have the best affinity for tetrachloroethylene. The interfacial tension between C(2)Cl(4) and H(2)O with urea-formaldehyde prepolymer descends from 43 to 35 mN/m, which indicates that the polymer has certain surface activity. However, water-soluble emulsifiers have an important influence during the microencapsulation because they can absorb on the surfaces of internal phase and prevent the resin of urea-formaldehyde from depositing there. From the SEM images of shell surface and cross section, the microcapsules have relatively smooth surfaces and the average thickness is about 4.5 mum. When the microcapsules are prepared with agitation rates of 1000 and 600 rpm, the mean diameters of the obtained microcapsules are 11 and 155 mum, respectively. The particles in the capsules move toward positive electrode with a responsive time of several hundred milliseconds while providing an electric field.