On-Line Separation and Preconcentration of Trace Metals in Biological Samples Using a Microcolumn Loaded with PAN-Modified Nanometer-Sized Titanium Dioxide,and Their Determination by ICP-AES

A flow injection analysis system incorporating a microcolumn of nanometer-sized TiO₂ loaded with 1-(2-pyridylazo)-2-naphthol (PAN) has been used for the development of an on-line multi-element method for simultaneous separation and preconcentration and subsequent determination of Cu²⁺, Co²⁺, Cr³⁺, Y³⁺, Yb³⁺ and Bi³⁺ by ICP-AES. Effects of pH, sample flow rate and volume, elution conditions, adsorption capacity and interfering ions on analyte recovery were examined. The adsorption capacity of nanometer-sized TiO₂ loaded with PAN was 4.73, 18.57, 3.81, 6.14, 4.52 and 20.35mgg^–1 for Cu²⁺, Cr³⁺, Y³⁺, Yb³⁺, Co²⁺ and Bi³⁺, respectively. The method has been applied to the analysis of trace elements in standard reference biological samples, and the results are in good agreement with the certified values.     

Optical Determination of Cholesterol in Milk with Molecularly Imprinted Polymer-Coated Quantum Dots

Fluorescent molecularly imprinted polymer-coated CdSe/ZnS quantum dots were prepared in an efficient one-step synthesis. Their application as fluorescent nanoparticles for the direct quantification of cholesterol in milk was characterized. The quantum dots were used as cores to produce fluorescence. The molecularly imprinted polymer shells provided specific binding sites for cholesterol. The system exhibited good linearity for cholesterol from 0.5 to 150?µg?mL^?1, a low detection limit of 0.15?µg?mL^?1, and acceptable reproducibility with a relative standard deviation of 4.2% for six replicates. The molecularly imprinted polymer-coated quantum dots were used to determine cholesterol in fortified milk. Recoveries were from 87.0 to 105.2% and a possible mechanism is proposed. The fluorescent molecularly imprinted polymer-coated quantum dots exhibited excellent selectivity and provide a simple, rapid, selective, and effective analytical approach.     

水滑石负载钯催化剂上的醇无氧脱氢反应

 研究了多种载体负载 Pd 催化剂上苯甲醇无氧脱氢反应. 结果发现, 以兼具较强酸性和碱性的水滑石 (HT) 为载体时, Pd 催化剂具有优异的苯甲醇转化活性和苯甲醛选择性, 当 Pd 含量为 0.32%~0.55% 时催化性能最佳. Pd/HT 催化剂可重复使用, 且对于含推电子取代基的芳香醇、2-噻吩甲醇、α,β-不饱和醇与环状脂肪醇等的直接脱氢反应均具有较好催化性能. HT 表面的 Pd(II) 物种反应后转变为平均粒径为 2.0~2.5 nm 的 Pd 纳米粒子或纳米簇. 具有较高分散度的 Pd(II) 物种易转变为较小的 Pd 纳米粒子, 从而具有较佳的催化性能. 本文推测, 催化剂表面的碱性位可促进苯甲醇 O–H 键的活化, 形成 Pd-苯甲氧基中间体, 该中间体进一步脱氢生成苯甲醛和 Pd-H 物种; 而催化剂表面的质子酸位可与 Pd-H 作用, 促进 H2 的脱除.     

Allylation of 5-Methylfurfural Catalyzed by Phase-Transfer Reagents in Aqueous Media

Allylation of 5-methylfurfural with allyl halide and zinc was performed by using quaternary ammonium and phosphonium salts as phase-transfer catalysts. The phosphonium salt showed higher activity than the ammonium salt. Excellent yields were obtained with both catalysts.     

空间杆系与叠层板组合结构的非线性稳定分析

本文用非线性有限元法研究一种空间杆系与复合材料叠层板组合结构的非线性稳定问题。将杆系离散成空间梁柱单元，将复合材料叠层板离散成复合材料叠层板单元，并考虑了几何非线性和板的成层正交各向异性性质。为了获得较高的计算效率并顺利通过稳定临界点，求解非线性平衡方程采用了变增量步长和柱面弧长法迭代策略。在考证了程序的正确性之后，具体分析了几个工程模型，得出了于工程设计有益的结论。     

Asymmetric Total Synthesis of (−)‐Kravanhin B

The first asymmetric total synthesis of kravanhin B has been accomplished with a linear reaction sequence of 13 steps starting from (R)‐(?)‐carvone. The synthesis features an intramolecular aldol cyclization to construct the desired cis‐fused decalin skeleton and an acid‐catalyzed dehydration and olefin isomerization to install the γ‐butenolide ring.     

非水溶剂溶胶-凝胶法制备的纳米卤氧化镧在甲烷氧化偶联反应中的应用

采用非水溶剂溶胶-凝胶法制备了具有四方晶体相结构的纳米LaOX(X=Cl,Br).X射线粉末衍射和扫描电子显微镜结果表明,纳米LaOX样品的形貌规整、粒径均匀(平均粒径约为47nm).在甲烷氧化偶联(OCM)反应中,纳米LaOX显示出比常规尺度LaOX更高的催化活性和C2选择性,且纳米LaOX具有良好的稳定性.此外,常...     

浙江省海岛土地资源开发利用探讨

浙江省是全国岛屿最多的省份，海岛为全省实现“海洋经济大省”起着重要作用。本文在分析浙江省海岛土地利用现状及其特点的基础上，指出开发利用中存在的主要问题，提出了合理开发利用的战略对策。