Synthesis and characterization of 2D transition metal dichalcogenides: Recent progress from a vacuum surface science perspective

Layered transition metal dichalcogenides (TMDs) are a diverse group of materials whose properties vary from semiconducting to metallic with a variety of many body phenomena, ranging from charge density wave (CDW), superconductivity, to Mott-insulators. Recent interest in topologically protected states revealed also that some TMDs host bulk Dirac- or Wyle-semimetallic states and their corresponding surface states. In this review, we focus on the synthesis of TMDs by vacuum processes, such as molecular beam epitaxy (MBE). After an introduction of these preparation methods and categorize the basic electronic properties of TMDs, we address the characterization of vacuum synthesized materials in their ultrathin limit-mainly as a single monolayer material. Scanning tunneling microscopy and angle resolved photoemission spectroscopy has revealed detailed information on how monolayers differ in their properties from multi-layer and bulk materials. The status of monolayer properties is given for the TMDs, where data are available. Distinct modifications of monolayer properties compared to their bulk counterparts are highlighted. This includes the well-known transition from indirect to direct band gap in semiconducting group VI-B TMDs as the material-thickness is reduced to a single molecular layer. In addition, we discuss the new or modified CDW states in monolayer VSe₂ and TiTe₂, a Mott-insulating state in monolayer 1T-TaSe₂, and the monolayer specific 2D topological insulator 1T′-WTe₂, which gives rise to a quantum spin Hall insulator. New structural phases, that do not exist in the bulk, may be synthesized in the monolayer by MBE. These phases have special properties, including the Mott insulator 1T-NbSe₂, the 2D topological insulators of 1T′-MoTe₂, and the CDW material 1T-VTe₂. After discussing the pure TMDs, we report the properties of nanostructured or modified TMDs. Edges and mirror twin grain boundaries (MTBs) in 2D materials are 1D structures. In group VI-B semiconductors, these 1D structures may be metallic and their properties obey Tomonaga Luttinger quantum liquid behavior. Formation of Mo-rich MTBs in Mo-dichalcogenides and self-intercalation in between TMD-layers are discussed as potential compositional variants that may occur during MBE synthesis of TMDs or may be induced intentionally during post-growth modifications. In addition to compositional modifications, phase switching and control, in particular between the 1H and 1T (or 1T′) phases, is a recurring theme in TMDs. Methods of phase control by tuning growth conditions or by post-growth modifications, e.g. by electron doping, are discussed. The properties of heterostructures of TMD monolayers are also introduced, with a focus on lateral electronic modifications in the moiré-structures of group VI-B TMDs. The lateral potential induced in the moiré structures forms the basis of the currently debated moiré-excitons. Finally, we review a few cases of molecular adsorption on nanostructured monolayer TMDs. This review is intended to present a comprehensive overview of vacuum studies of fundamental materials' properties of TMDs and should complement the investigations on TMDs prepared by exfoliation or chemical vapor deposition and their applications.     

超疏水表面液滴的振动特性及其与液滴体积的关系

超疏水表面液滴的振动特性与接触线的移动、液滴体积、基底振幅等因素密切相关.本文在基底振幅较小且恒定的条件下,研究了超疏水表面液滴的共振振幅、模式区间、共振频率等振动特性及其与液滴体积(20—500μL)的关系.此外,将基于一般性疏水表面建立的Noblin共振频率计算模型应用于超疏水表面,并提出“虚驻点”的概念,借此对模型进行了误差分析和修正.研究表明:1)共振时,液滴高度变化率即比振幅随体积增大而增大,随阶数增大而减小;2)各模式区间的起止频率首尾相接,其范围随体积增大而减小;3)液滴体积越大,共振频率越小,随着阶数增大,共振频率f与体积V的关系趋于f-V^–0.4,不同于一般性疏水表面上的f-V^–0.5;4)直接应用Noblin模型计算共振频率会产生较大误差,主要原因在于液滴表面波波段数量统计存在较大偏差,而修正后的模型可以准确计算超疏水表面大体积液滴的共振频率.     

Analysis of droplet behavior in a de-oiling hydrocyclone

A mechanical separation process in a de-oiling hydrocyclone is described in which disperse oil droplets are separated from a continuous water phase. This separation process is influenced by droplet breakage and coalescence. Based on experimental data and simulation results in a stirred tank, a modified breakage model, which can be applied to droplet breakage in the de-oiling hydrocyclone, is developed. Then, a simulation model is developed coupling the numerical solution of the flow field in the hydrocyclone based on computational fluid dynamics (CFD) with population balances. The homogenous discrete method and the inhomogeneous discrete method are applied for solving the population balance model (PBM). The investigations show that the numerical results obtained by the simulation model coupled with the modified PBM using the inhomogeneous discrete method are in good accordance with experimental data under a high flow rate. According to this simulation model, the effect of three different inlet designs on the separation efficiency of the de-oiling hydrocyclone has been discussed. The results indicate that the separation efficiency of the de-oiling hydrocyclone can be improved with an appropriate inlet design.     

Dye-dependent studies on droplet pattern and electro-optic behaviour of polymer dispersed liquid crystal

In order to study the droplet pattern and electro-optic (EO) behaviour of polymer dispersed liquid crystal (PDLC) with the addition of dye, dichroic polymer dispersed liquid crystal (DPDLC) films were prepared using a nematic liquid crystal (NLC), photo-curable polymer (NOA 65) and anthraquinone blue dichroic dye (B2), in equal ratio (1:1) of polymer and liquid crystal (LC) by polymerisation induced phase separation (PIPS) technique. Dichroic dye was taken in different concentration (wt./wt. ratio) as 0.0625%, 0.125%, 0.25%, 0.5% and 1% of the LC mixture in DPDLC films. Initially, in an open circuit when there is no proviso for external electric field (0 V), LC droplets in polymer matrix exhibited bipolar pattern, though on closing the circuit with the increase of electric field pattern of droplets starts changing, LC molecules align along the direction of applied electric field and aligned completely relatively at higher field (30 V), which illustrate vertical radial pattern. Further, results show that the DPDLC film containing 0.0625% dye concentration with consistent average droplet size ~4.30 μm, exhibits the best transmission at lower operating voltage.     

Director configurations in nematic droplets with tilted surface anchoring

The polymer dispersed nematic liquid crystal (LC) with the tilted surface anchoring has been studied. The droplet orientational structures with two point surface defects – boojums and the surface ring defect – are formed within the films. The director tilt angle α = 40° ± 4° at the droplet interface and LC surface anchoring strength W_s ~ 10^–6 (J m^?2) have been estimated. The bipolar axes within the studied droplets of oblate ellipsoidal form can be randomly oriented are oriented randomly relatively to the ellipsoid axes as opposed to the droplets with homeotropic and tangential anchoring.     

Dispersive liquid-liquid microextraction based on the solidification of floating organic droplet for the determination of polychlorinated biphenyls in aqueous samples

In the proposed method, an extraction solvent with a lower toxicity and density than the solvents typically used in dispersive liquid-liquid microextraction was used to extract seven polychlorinated biphenyls (PCBs) from aqueous samples. Due to the density and melting point of the extraction solvent, the extract which forms a layer on top of aqueous sample can be collected by solidifying it at low temperatures, which form a layer on top of the aqueous sample. Furthermore, the solidified phase can be easily removed from the aqueous phase. Based on preliminary studies, 1-undecanol was selected as the extraction solvent, and a series of parameters that affect the extraction efficiency were systematically investigated. Under the optimized conditions, enrichment factors for PCBs ranged between 494 and 606. Based on a signal-to-noise ratio of 3, the limit of detection for the method ranged between 3.3 and 5.4 ng L⁻¹. Good linearity, reproducibility and recovery were also obtained.     

Mesoscale Surface Patterning of a Laterally‐Grafted Rod Amphiphile: Rings And Fibers

An aromatic amphiphilic molecule based on branched oligo(ethylene oxide) was synthesized. Evaporation‐driven ring formation and Langmuir–Blodgett films are investigated by utilizing this rigid–flexible block molecule. The size of the rings is strongly dependent on the solvent evaporation rate and the concentration of the molecule. In case of fast evaporation, volcano‐like rings are formed by evaporating solution of high concentration. Perfectly symmetrical rings with diameters in the range of 2–6 μm are obtained by evaporating solution of low concentration. The formation mechanism of the ring is briefly discussed. The molecule at the air–water interface exhibits excellent amphiphilic properties. Upon transferring the monolayer onto solid substrates, AFM revealed the formation of fine and long, straight fibers. By combining the data obtained from the isotherms, AFM, water contact angle measurements, and UV/Vis and fluorescence spectra, the fibers are suggested to be formed by π–π stacking interaction of the aromatic rod segments as the oligo(ethylene oxide) branches are submerged in the water subphase upon compression. The fiber formation is associated with the transformation of the aromatic rod segments from the face‐on conformation to the edge‐on conformation.     

Free standing modulation doped core–shell GaAs/AlGaAs hetero‐nanowires

Modulation doped AlGaAs/GaAs core–shell nanowire structures were grown by molecular beam epitaxy. A Si delta‐doping was introduced in the AlGaAs shell around the {110} facets of the GaAs core. The wires are typically highly resistive at low temperatures. However, they show a pronounced persistent photoconductivity effect indicating activation of free carriers from the delta‐doped shell to the GaAs core. The n‐type character of the channel is demonstrated by applying a back‐gate voltage. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Asymmetric electrical properties in Pt/Ba0.5Sr0.5Ti0.99Co0.01O3/Nb-doped SrTiO3 capacitors

Ba_0.5Sr_0.5Ti_0.99Co_0.01O₃ (BSTC) thin films have been fabricated with pulsed laser deposition on Nb-doped SrTiO₃ (STN) substrate. In Pt/BSTC/STN capacitor, we systematically investigated the capacitance, leakage current and polarization versus bias voltage characteristics, and found that curves of capacitance versus voltage and leakage current versus voltage were not symmetric, and polarization hysteresis loop exhibited large relaxation of the remnant polarization at negatively poled state. A detailed analysis of capacitance data demonstrated a difference of the built-in voltage between top Pt/BSTC interface (V_b,t=2.5 V) and bottom BSTC/STN interface (V_b,b=1.1 V). Such different built-in voltages lead to the presence of an internal electric field, which results in asymmetric electric characteristics in Pt/BSTC/STN capacitor.     

Si(001)衬底上分子束外延生长Ge0.975Sn0.025合金薄膜

使用低、高温两步法生长的高质量Ge薄膜作为缓冲层,在Si(001)衬底上采用分子束外延法生长出Ge_0.975Sn_0.025合金薄膜.X射线双晶衍射和卢瑟福背散射谱等测试结果表明,Ge_0.975Sn_0.025合金薄膜具有很好的晶体质量,并且没有发生Sn表面分凝.另外,Ge_0.975Sn_0.025合金薄膜在500 ℃下具有很好的热稳定性,有望在Si基光电器件中得到应用. 关键词： GeSn Ge 分子束外延 外延生长