高气压反射式高能电子衍射仪监控脉冲激光外延氧化物薄膜

在超高真空分子束外延（MBE）生长技术中，反射式高能电子衍射仪（RHEED）能实时显示半导体和金属外延生长过程，给出薄膜表面结构和平整度的信息，成为MBE必备的原位表面分 析仪.为了研究氧化物薄膜如高温超导（YBa₂Cu₃O₇） 、铁电薄膜（Sr_1-xBa_x TiO₃）及它们的同质和异质外延结构的生长机理，获得高质量的符合各种应用 需要的氧化 物多层薄膜结构，在常规的制备氧化 关键词： 高温超导薄膜 RHEED     

Morphology of Platinum Nanowire Array Electrodepostied Within Anodic Aluminium Oxide Template Characterized by Atomic Force Microscopy

Unifrom platinum nanowires were synthesized by electrodepositing the platinum under a very low altering current frequency(20Hz) and increasing voltage(5-15V）in the proes of anodic aluminium oxide(AAO) template. Atomic force microscopy observation indicates that the template membranes we obtained have hexagonally clse-packed nanochannels.The platinum nanowires have highly ordered arrays after partially dissolving the aluminium oxide membrane.With the increasing dissolvoing time,the platinum nanowire array collapsed.A concave topography of the aluminium substrate was observed after the aluminium oxide membrane was dissolved completely and the platinum nanowires were released from the template.Platinum nanowires were also characterized by transmission electron microscopy and the phase structure of the Al/AAO/Pt composite was proven by x-ray diffraction.     

一种新的超分辨记录点的读出技术

提出一种新的超分辨记录点的读出技术—超分辨反射膜技术，详细分析了其原理。用该技术，以Sb为超分辨反射膜，SiN为介电层，在激光波长为632．8nm和光学头的数值也径为0．40的读出光学系统中实现了直径为380nm的超分辨记录点的读出。同时研究了Sb薄膜厚度对读出信噪比的影响规律，发现最佳的Sb薄膜厚度为28～30nm，所得的信噪比为38～40dB。     

氟化类金刚石薄膜的拉曼和红外光谱结构研究

关键词：     

Deposition of Diamond-Like carbon Films by High-Intensity Pulsed Ion Beam Ablation at Various Substrate Temperatures

Diamond-like carbon (DLC) films have been deposited on to Si substrates at substrate temperatures from 255℃ to 400O℃ by a high-intensity pulsed-ion-beam (HIPIB) ablation deposition technique. The formation of DLC is confirmed by Raman spectroscopy. According to an x-ray photoelectron spectroscopy analysis, the concentration of sp^3 carbon in the films is about 40% when the substrate temperature is below 300℃ C. With increasing substratetemperature from 25℃ to 400℃, the concentration of sp^3 carbon decreases from 43% to 8%. In other words,sp3 carbon is graphitized into sp^2 carbon when the substrate temperature is above 300℃. The results of xray diffraction and atomic force microscopy show that, with increasing the substrate temperature, the surface roughness and the friction coefficient increase, and the microhardness and the residual stress of the films decrease.     

Optical Properties of ZnFe2O4—SiO2 Granular Films Prepared by Radio—Frequency Magnetron Sputtering

We report on the optical properties of ZnFe2O4-SiO2 granular films prepared on quartz substrates by the radio-frequency magnetron sputtering method.Post-annealing was performed at different temperatures under flow oxygen atmosphere.The morphology and Structures of ZnFe2O4 nanoparticles were characterized by x-ray different line types in the optical absorption curves of ZnFe2O4-SiO2 granular films.The critical transition of line types occurs when ZnFe2O4 changes from amorphous to crystalline,and the transition temperature increases with the increasing content of ZnFe2O4.There is an obvious blueshift of the optical absorption edge of the granular films with the decreasing annealing temperature.     

Fluorescence Microscopy of Nanoscale Silver Oxide Thin Films

The experimental conditions for photoactivated intermittent fluorescence from nanoscale silver oxide were studied with fluorescence microscopy.Strong fluorescence was observed from the Ag2O particles with size of 10-20nm excited with both blue and green light .We observed the saturation of Photoexcitation with blue light and explained the experimental results using the model of agglomeration of silver atoms to form small clusters and the fluorescence of Ag2 and Ag3 clusters.     

基片温度对坡莫合金薄膜结构和磁电阻的影响

用磁控溅射方法制备了系列坡莫合金Ni80Fe20薄膜。利用X射线衍射、扫描电子显微镜和原子力显徽镜分析了薄膜的结构、晶粒取向、薄膜厚度、截面结构和表面形态。用4点探测技术测量了薄膜的电阻和磁电阻。结果表明：随衬底温度的升高，晶粒明显长大。膜内的缺陷和应力显著减小，而且增强了薄膜晶粒的[111]择优取向。结果表明，薄膜电阻率显著减小，而磁电阻显著增大。     

离子注入合成β-FeSi2薄膜的显微结构

采用MEVVA源(Metal Vapor Vacuum Arc Ion Source)离子注入合成β-FeSi2薄膜,用常规透射电镜和高分辨电镜研究了不同制备参数下β-FeSi2薄膜的显微结构变化. 研究结果表明:调整注入能量和剂量,可以得到厚度不同的β-FeSi2表面层和埋入层. 制备过程中生成的α,β,γ和CsCl型FeSi2相的相变顺序为γ-FeSi2→β-FeSi2→α-FeSi2,CsCl-FeSi2→β-FeSi2→α-FeSi2或β-FeSi2→α-FeSi2. 当注入参数增加到60kV,4×1017ions/cm2,就会导致非晶的形成,非晶在退火后会晶化为β-FeSi2相,相变顺序就变为非晶→β-FeSi2→α-FeSi2. 随退火温度逐渐升高硅化物颗粒逐渐长大,并向基体内部生长,在一定的退火温度下硅化物层会收缩断裂为一个个小岛状,使得硅化物/硅界面平整度下降. 另外,对于β-FeSi2/Si界面取向关系的研究表明,在Si基体上难以形成高质量β-FeSi2薄膜的原因在于多种非共格取向关系的并存、孪晶的形成以及由此导致的界面缺陷的形成.     

同步辐射光电子能谱表征MgO在GaAs（100）上淀积过程中的氧物种

用同步辐射光电子能谱表征了不同氧分压下通过热蒸发镁在ＧａＡｓ（１００）面制备氧经物超薄膜过程中的氧物种，结果表明表面氧物种的形式与镁氧配比有关，较高的氧分压下于形成活泼的分子离子等氧中间体，因此通过控制镁氧比可以制备高效的薄膜模型催化剂或适合于功能材料集成的规则氧化物过渡层，氧物种的形式可以通过能谱中不同的原子或分子轨道电子跃迁来有效地区分。