2,2联吡啶-5,5-二羧酸与稀土配合物的合成、结构及发光性能

利用2,2-联吡啶-5,5-二羧酸作为配体,采用水热法,合成了稀土配合物[Ln2(bpydc)3·2DMF]n(1,Ln=Eu,Tb;Hbpydc=2,2-联吡啶-5,5-二羧酸).单晶X射线测试表明Tb配合物与Eu配合物具有相同结构.配合物1·Tb属于三斜晶系,P-1空间群,晶胞参数为a=1.39657(2) nm,b=1.40874(1)nm,c=1.45241 (1) nm,α=90.887(1)°,β=115.261(1)°,γ=113.951(1)°,V=2.29931(5) nm3,Z=2;同时,配合物1·Tb具有新颖的三维结构,七个氧原子在稀土离子周围形成一个略微变形的单帽三棱柱配位环境.利用红外光谱、荧光光谱、磷光光谱对配合物进行了表征,结果表明:Eu(Ⅲ)与Tb(Ⅲ)配合物分别在612 nm与542 nm处有强烈的特征荧光发射;配体三重态能级(26178 cm-1)与Eu (Ⅲ)、Tb(Ⅲ)的最低激发态能级匹配,配合物具有优良的能量传递效率.     

类氖氩离子能级及碰撞强度的计算

利用扭曲波波恩近似方法及AUTOSTRUCTURE (AS)程序，快速精确地计算了类氖Ar8+离子2s22p6、2s22p53s、2s22p53p、2s22p53d、2s2p63s、2s2p63p和2s2p63d组态的能级以及当电子碰撞能量为75.0、125.0、175.0、250.0 (Ry)时，从j能态到i能态的碰撞强度.并且与已有的研究成果进行了对比.结果表明，采用扭曲波波恩近似并结合AUTOSTRUCTURE (AS)程序的研究方法，可以成为研究原子或离子碰撞强度的有效途径。     

一种新的磁共振图像处理流水线的设计与实现

磁共振图像的重建、后处理及可视化是磁共振成像（MRI）系统的重要组成部分.本文开发了一个新的用于磁共振图像重建、后处理及可视化的开源框架YAP（Yet Another Pipeline），利用此框架可以方便地构建图像处理流水线.与现有的一些其他开源框架相比，本文开发的框架具有如下特点：（1）采用基于接口的设计，可使用基于接口的插件对流水线的功能进行扩展；（2）允许用户使用编写脚本的方式构建图像处理流水线，编辑与修改流水线都很方便；（3）支持带有分支结构的流水线，便于流水线的构建与调试.目前，该框架已经在商用系统中获得了应用.     

一对单核铜-酪氨酸手性配合物的合成、晶体结构及磁性性质（英文）

在水溶液中合成了一对单核铜-酪氨酸手性配合物[Cu(L-Tyr)_2](1)和[Cu(D-Tyr)_2](2)[Tyr=酪氨酸],并通过元素分析、红外光谱和X射线单晶衍射以及圆二色光谱对其结构进行了表征.结构分析表明1和2是由单位[Cu(L-Tyr)_2]或者[Cu(D-Tyr)_2]通过Cu-O键连接而成的一维链状结构.从超分子化学的角度来看,邻近的单位[Cu(L-Tyr)_2]或者[Cu(D-Tyr)_2]之间通过弱的氢键相互作用而连接成三维超分子结构.1和2的变温磁化率的研究表明1和2表现出铁磁性行为.而且场依存磁化测量表明1和2处于S=1/2基态.     

4′-苯基-2,2′∶6′,2″-三联吡啶镍配合物的合成与晶体结构

运用水热法合成了1个新的配合物[Ni(Phtpy)2](CH3COO)2(化合物1),(Phtpy=4′-苯基-2,2′∶6′,2″-三联吡啶),并通过X-射线单晶衍射方法确定了该化合物的晶体结构.结构分析表明化合物1属于三斜晶系,P-1空间群,晶胞参数a=0.905 60(8)nm,b=1.103 07(9)nm,c=2.020 14(15)nm,α=94.383 0(10)°,β=100.983 0(10)°,γ=106.312 0(10)°,V=1.883 1(3)nm3,Z=2,R1=0.087 2,wR2=0.183 1.配合物中存在3种氢键和多种π-π相互作用,使其成为一个3D配合物.     

用Hirota双线性方法构造一种(3+1)维高维孤子方程的多孤子解

通过两种方法构造了一种(3+1)维高维孤子方程的孤子解.第一种方法是利用对数函数变换,将其化成双线性形式的方程,在用级数扰动法求解双线性方程的单孤子解、双孤子解和N-孤子解.第二种方法是用广义有理多项式与试探法相结合,构造了(3+1)维高维孤子方程的怪波解.     

Melt Crystallization of Poly(butylene 2,6-naphthalate)

Poly(butylene 2,6-naphthalate)(PBN)is a crystallizable linear polyester containing a rigid naphthalene unit and flexible methylene spacer in the chemical repeat unit.Polymeric materials made of PBN exhibit excellent anti-abrasion and low friction properties,superior chemical resista nee,and outstanding gas barrier characteristics.Many of the properties rely on the presence of crystals and the formatio n of a semicrystalline morphology.To develop specific crystal structures and morphologies during cooling the melt,precise information about the melt-crystallization process is required.This review article summarizes the current knowledge about the temperature-controlled crystal polymorphism of PBN.At rather low supercooling of the melt,with decreasi ng crystal I izatio n temperature,0'-and a-crystals grow directly from the melt and organize in largely different spherulitic superstructures.Formation of a-crystals at high supercooling may also proceed via intermediate formation of a transient monotropic liquid crystalline structure,then yielding a non-spherulitic semicrystalline morphology.Crystallization of PBN is rather fast since its suppression requires cooling the melt at a rate higher than 6000 K-s_1.For this reason,investigation of the two-step crystallization process at low temperatu res requires application of sophisticated experimental tools.These in elude temperatureresolved X-ray scattering techniques using fast detectors and synchrotron-based X-rays and fast scanning chip calorimetry.Fast scanning chip calorimetry allows freezi ng the transie nt liquid-crystalline structure before its con version into a-crystals,by fast cooling to below its glass transition temperature.Subsequent an alysis using polarized-light optical microscopy reveals its texture and X-ray scatteri ng con firms the smectic arrangement of the mesogens.The combination of a large variety of experimental techniques allows obtaining a complete picture about crystallization of PBN in the entire range of melt-supercoolings down to the glass transition,including quantitative data about the crystallization kinetics,semicrystalline morphologies at the micrometer length scale,as well as nanoscale X-ray structure information.     

Advances in high carbon dioxide separation performance of poly(ethylene oxide)-based membranes

Poly(ethylene-oxide)(PEO)-based membranes have attracted much attention recently for CO2 separation because CO2 is highly soluble into PEO and shows high selectivity over other gases such as CH4 and N2.Unfortunately,those membranes are not strong enough mechanically and highly crystalline,which hinders their broader applications for separation membranes.In this review discussions are made,as much in detail as possible,on the strategies to improve gas separation performance of PEO-based membranes.Some of techniques such as synthesis of graft copolymers that contain PEO,cross-linking of polymers and blending with long chains polymers contributed significantly to improvement of membrane.Incorporation of ionic liquids/nanoparticles has also been found effective.However,surface modification of nanoparticles has been done chemically or physically to enhance their compatibility with polymer matrix.As a result of all such efforts,an excellent performance,i.e.,CO2 permeability up to 200 Barrer,CO2/N2 selectivity up to 200 and CO2/CH4 selectivity up to 70,could be achieved.Another method is to introduce functional groups into PEO-based polymers which boosted CO2 permeability up to 200 Barrer with CO2/CH4 selectivity between 40 and 50.The CO2 permeability of PEO-based membranes increases,without much change in selectivity,when the length of ethylene oxide is increased.     

卡普利加(Kaprekar)数的构造和推广

本文首先在位数相同的数集中,定义一种新的运算——循环进位法,并证明循环进位法的加法、乘法使位数相同的数集构成群、环.在此环中,我们又给出卡普利加数的定义,并在环的主理想中,推出它的构造原理和算法.最后我们把"一分为二(卡普利加数)"推广到"一分为N".     

AR(2)模型自相关函数计算公式的回顾

本文基于AR(2)模型的Yule-Walker方程组,利用二阶线性常系数递推关系的一般理论,导出了AR(2)过程自相关函数计算公式.