一种新型的二元光学器件——多位相光束分束器的制作

本文报道了用于多光束分束器的反射式16位相值二元光学器件的制作。该二元光学器件把一束光束分成5×5光束阵列。测量的衍射效率为76.16%,接近理论设计值79.68%。该二元光学器件的有效孔径为10mm×10mm。     

Vasicek债券定价模型的推广形式

V asicek债券定价模型假定即期利率r(t)遵循O-U过程,利率的长期均值θ为一个常数.对此进行推广,假设θ遵循一个离散跳跃过程,跳跃的次数与幅度由中央银行根据物价指数确定,建立一个新的模型.运用Ito引理和无套利原理给出到期日价值为1的零息票债券的定价公式.     

在可交换四元数空间中的双曲方程的特征边值问题

讨论了一阶和二阶双曲复方程的特征边值问题.对其中两种线性方程,分别在不同的情况下获得通解和可解条件.而对于拟线性的二阶双曲复方程,证明了解的存在性和唯一性.     

QUATERNION GENERALIZED SINGULAR VALUE DECOMPOSITION AND ITS APPLICATIONS

This paper derives a theorem of generalized singular value decomposition of quaternion matrices （QGSVD）,studies the solution of general quaternion matrix equation AXB -CYD= E,and obtains quaternionic Roth＇s theorem. This paper also suggests sufficient and necessary conditions for the existence and uniqueness of solutions and explicit forms of the solutions of the equation.     

红外光谱对碱土金属二元羧酸盐结构的研究

研究了三十种二元羧酸金属盐的红外光谱，讨论了金属离子和二元酸的种类对二元酸盐配位结构的影响。发现Mg盐、Ba盐，Sr盐为螯合配位，Ca盐，Zn盐中同时存在螯合配位和桥式配位，二元酸的种类对羧酸盐配位结构没有影响。对羧酸盐在常温和熔融后的栩位方式和结构上的差异的研究结果表明，Mg盐，Ca盐与Sr盐，Ba盐在熔融后的结构变化不同。     

精密垫片精冲工艺有限元分析与模具设计

精密垫片零件，如图1所示，零件材料为1Cr18Ni9Ti，强度大（σb=650MPa），有一定塑性。从零件尺寸精度看，φ4mm外圆为IT7级精度，φ4mm外圆与φ2mm内孔有很高的同轴度要求，冲裁断面与零件两端面有垂直度要求，普通冲压不能达到零件精度：从工序的角度看，有冲孔和落料工序，剪切面粗糙度Ra≤3．2μm，属于光洁冲裁范畴；另外，技术条件中要求零件两大面不得有任何划伤，且光滑平整。总体上看，该零件的冲压加工性不好，难度较大，对模具的设计、选材、制造要求都较高。     

关于态射的Drazin逆

给出了态射的Drazin逆存在的条件及显式表达式，改进并推广了[1]、[2]与[3]中的一些主要定理。     

静电场中零电势点的确定和电势的计算

在静电场中,零电势点位置的确定,对电势计算的方便与否起着致关重要的作用.下面就4种情况,简述零电势点位置的确定及相应电势的计算公式.1 点电荷电场中各点电势的计算 例1 设一带电量为Q的点电荷,放在相对电容率为εT的无限大均匀电介质中,求空间各点的电势.     

极紫外望远镜各通道夹角的测量

极紫外望远镜是由四个单通道的望远镜捆绑在一起,以便同时对太阳的相同部分观测,由于受地面装调以及发射过程中的影响,无法保证四个通道光轴严格平行,必然带来观测位置上的误差。只要测出各通道之间的光轴夹角,便可在像面上采取适当的处理方法,以便减小这种误差,但这一夹角的测量精度必须控制在0.1″内。为达到如此高的精度,采用了太阳局部边缘探测的方法,很好地解决了这一问题。     

THE COUPLING OF NATURAL BOUNDARY ELEMENT AND FINITE ELEMENT METHOD FOR 2D HYPERBOLIC EQUATIONS

In this paper, we investigate the coupling of natural boundary element and finite element methods of exterior initial boundary value problems for hyperbolic equations. The governing equation is first discretized in time, leading to a time-step scheme, where an exterior elliptic problem has to be solved in each time step. Second, a circular artificial boundary FR consisting of a circle of radius R is introduced, the original problem in an unbounded domain is transformed into the nonlocal boundary value problem in abounded subdomain. And the natural integral equation and the Poisson integral formula are obtained in the infinite domainΩ2 outside circle of radius R. The coupled variational formulation is given. Only the function itself, not its normal derivative at artificial boundary ΓR, appears in the variational equation, so that the unknown numbers are reducedand the boundary element stiffness matrix has a few different elements. Such a coupled method is superior to the one based on direct boundary element method. This paper discusses finite element discretization for variational problem and its corresponding numerical technique, and the convergence for the numerical solutions. Finally, the numerical example is presented to illustrate feasibility and efficiency of this method.