毛细管电色谱研究进展

毛细管电色谱是一种新兴的具有高效，高选择性的微分离技术。本文评述了毛细管电色说的发展状况和相关的技术，并对其发展前景进行了展望，引用文献２４篇 。     

恒电流吸附计时电位法的研究 Ⅱ.铜、铅的微分吸附计时电位法连测

研究了ＮＨ３／ＮＨ４Ｃｌ底液中，铜、铅与水杨基荧光酮（ＳＡＦ）形成的络合物在悬汞电极上的恒电流吸附计时电位溶出行为。讨论了富集时间，溶液ｐＨ值，溶出恒电流大小及铜、铅浓度比值等对ｄｔ／ｄＥ～Ｅ溶出曲线的影响。并得出了连测铜铅的条件。     

LiCoO2中锂离子固相扩散系数随循环次数的变化

The solid diffusion coefficient of lithium-ion in LiCoO₂ cathode material has been investigated by the capacity intermittent titration technique (CITT) at different voltages and at different charge/discharge cycles. By SEM, XRD and FTIR techniques, the structure of LiCoO₂ was studied before and after charge-discharge cycles, and the relationship between solid diffusion coefficient and crystal structure was further discussed. CITT results show that the value of Li⁺ solid diffusion coefficient of LiCoO₂ is about 10^-12 cm²·s^-1. During the whole charge-discharge cycles, the Li⁺ solid diffusion coefficient decreased within the voltage of 4.0～4.3 V, which is attributed to the change of the structure of LiCoO₂.     

腈菌唑分子印迹聚合物的制备及识别性能研究

以腈菌唑为模板分子，采用原位分子印迹技术，制备具有特定识别性能的连续棒状分子印迹聚合物。考察了流动相中酸量对分离的影响，研究了几种结构类似物在所得分子印迹柱上的保留特性。结果表明，这种棒状分子印迹聚合物比相应的空白聚合物有高的识别性能和选择性。     

肉苁蓉挥发性化学成分分析

报道了用同时蒸馏—萃取法提取肉苁蓉挥发性物质，测得肉苁蓉挥发油的含量为3．5％；利用GC／MS法分离确认出24种化学成分；用峰面积归一化法得出各化学成分在挥发油中的相对百分含量，其中主要成分为丁香酚，占总挥发油的83．60％；又用单离子法分离出丁香酚，并用IR，EI-MS法对其进行分析确认。     

溶液酸度和反应温度对CaMoO4薄膜电化学制备的影响

本工作研究了恒电流电化学技术制备CaMoO₄薄膜工艺中，溶液酸度和反应温度对薄膜形成的影响。结果表明，酸度会影响薄膜的生长时间和光致发光特性，在较低酸度沉积薄膜时，容易造成薄膜的团簇生长和不确定相的形成；适当升高反应温度会加快晶粒的生长、提高薄膜的纯度、增加薄膜发射光谱的相对强度。在CaMoO₄薄膜电化学制备工艺中，溶液pH值控制在12.0附近和反应温度控制在60 ℃的左右比较好。     

吡啶—2,6—二羧酸体系导数荧光法同时测定铀,钐,铕,铽,镝

本研究了吡啶－２，６－二羧酸（ＤＰＡ）体系导数荧光法同时测定铀，钐，铕，铽，镝的最佳条件。在ｐＨ５．５，４．８×１０＾－＾５ｍｏｌ／ＬＤＰＡ，激发波长２７２ｎｍ的条件下，可分别在５１８，６３９，６２１，５３９和６６ｎｍ处测定铀，钐，铕，铽和镝，检测限分别达到７，０．４，０．００４，０．０２６和０．２５ｎｇ／ｍＬ。应用本法测定了混合成试液中上术五种离子含量，回收率为９２．３－１０８．１％。     

自动化流动注射停流动力学分析仪的研制及其性能测试

本文研制了一套自动化流动注射停流动力学分析仪，该仪器由苹果Ⅱ型微机通过１２位ＡＤ／ＤＡ卡，流动注射停流控制仪及用ＢＡＳＩＣ语言编制的软件控制泵的起动和停止，试样的输送和混合，数据采集和处理，结果显示和打印，通过以铁（Ⅲ）与硫氰酸盐的反应体系采用固定时间法和以钒（Ｖ）的胶束催化反庆体系采用安始速法的现场测试证明，该仪器具有结构简单，操作方便，恒温性能好，通用性强等特点。     

脱蜡剂DF-1的气相色谱-傅里叶变换红外光谱联用分析

脱蜡剂ＤＦ－１是一种含多种有机成分的碳氢化合物，经气相色谱－红外光谱联用分析后，确定了这些组分的组成与含量。     

Fluorine containing poly(amide-imide)s: synthesis and formation of Langmuir-Blodgett monolayers

Soluble fluorine containing poly(amide-imide)s, PAI(1-4), were synthesized from diimide-dicarboxylic acid, 2,2-bis[N-(4-carboxyphenyl)-phthalimide-1,4-yl]hexafluoropropane with various diamines by direct polycondensation in N-methyl-2-pyrrolidone (NMP) containing CaCl₂ and using triphenyl phosphite and pyridine as condensing agents. The polymers were readily soluble in aprotic polar solvents such as NMP, N,N-dimethylacetamide, dimethyl sulfoxide and tetrahydrofuran. Their Langmuir monolayers were studied at the air/water interface. The monolayers were generally stable at the water surface and could be reproducibly transferred onto solid substrates to build up Langmuir-Blodgett (LB) multilayers. The LB mono- and multilayers were characterized by ultra-violet/visible spectroscopy (UV-Vis), surface plasmon resonance, atomic force microscopy.