SYNTHESIS OF BLOCK COPOLYMER FROM 5,6 -BENZO-2-METHYLENE-1,3-DIOXEPANE AND METHYL ACRYLATE VIA ATOM TRANSFER RADICAL POLYMERIZATION

Poly(methyl acrylate)-b-poly(5,6-benzo-2-methylene-1, 3-dioxepane) (PMA-b-PBMDO) was synthesized by two-step atom transfer radical polymerization (ATRP). Firstly, ATRP of methyl acrylate (MA) was realized using ethyl α-bromobutyrate (EBrB) as initiator in the presence of CuBr/2,2'-bipyridine. After isolation, poly(methyl acrylate) withterminal bromine (PMA-Br) was synthesized. Secondly, the resulting PMA-Br was used as a macromolecular initiator in theATRP of BMDO. The Structure of block copolymer was characterized by ~1H-NMR spectroscopy. Molecular weight andmolecular weight distribution were determined on a gel permeation chromatograph (GPC).     

青霉素酰化酶在甲基丙烯酸缩水甘油酯共聚物上的固定化

 用共价键合法将青霉素酰化酶固定化在珠状多孔的甲基丙烯酸缩水甘油酯（GM）共聚物上，研究了固定化反应时间、温度、pH值和酶液用量对固定化青霉素酰化酶的表观活性、表观偶联效率、活性回收及稳定性的影响．将GM共聚物载体加入到磷酸缓冲液（0．1mol／L，pH10．8）与青霉素酰化酶液（每克干载体用酶液1ml）的混合溶液中，在30℃下反应72h，单位质量（干重）固定化酶的表观活性为348U／g，表观偶联效率为66．7％，活性回收为31．7％．     

双亲半柔性两嵌段共聚物在溶液中自组装形态的模拟退火研究

针对一系列疏溶剂嵌段与溶剂间的相互作用,用模拟退火方法研究了双亲半柔性两嵌段共聚物在溶液中的自组装形态.模拟结果显示共聚物在溶液中均形成核-壳聚集体,其中疏溶剂嵌段形成聚集体的核,亲溶剂嵌段形成聚集体的壳.当上述相互作用较小时,核呈球形,而壳如同长在核上的刺.随着上述相互作用的增大,核逐渐增大.在较大的相互作用时,核呈柱形;而随着相互作用的加大,长在核上的刺逐渐伏贴于核表面.在更大的相互作用时,核又呈球状,壳伏贴于核表面.     

Antifouling ultrafiltration membrane composed of polyethersulfone and sulfobetaine copolymer

A new random copolymer was synthesized by reacting hydrophilic N,N-dimethyl-N-methacryloxyethyl-N-(3-sulfopropyl) (DMMSA) with hydrophobic butyl methacrylate (BMA) through a conventional radical polymerization. The as-prepared sulfobetaine copolymer (DMMSA–BMA) was blended with polyethersulfone (PES) to fabricate antifouling ultrafiltration membrane for BSA separation. The X-ray photoelectron spectroscopy analysis of blend membranes revealed concentration of sulfobetaine groups at the membrane surfaces that endowed the membrane with higher hydrophilicity and better antifouling property. For the membrane with 8.0 wt% DMMSA–BMA copolymer concentration (No. 5), irreversible fouling has been considerably reduced and the flux recovery rate of the blend membrane reached as high as 82.8%. Furthermore, the blend membrane could effectively resist BSA fouling in a wide pH range from 4.0 to 8.0.     

苯乙烯-马来酸酐共聚物的核磁共振分析

利用^1H NMR、^13C NMR及DEPT(无畸变极化转移增强)核磁共振技术研究了苯乙烯-马来酸酐共聚物(SMA)的序列结构和组成，并比较了几种核磁共振实验技术对分析SMA结果的准确性；实验表明^1H NMR是分析组成的简单、快速而有效的方法，DEPT谱进行序列结构计算准确度较高。     

聚酯-聚酯多嵌段共聚物的合成及其动态力学性能

聚酯-聚醚多嵌段共聚物的动态力学性能谱上有两个T_8,不宜做阻尼材料。本文报道聚对苯二甲酸乙二醇酯(PET)-端羟基聚己二酸乙二醇酯(PEA)共聚物(简称嵌段共聚酯),比聚醚-聚酯多嵌段共聚物有更好的相容性。我们研究了PEA的分子量,间苯二甲酸的用量对嵌段共聚酯的结晶度,以及结晶度对嵌段共聚酯的动态力学性能的影响。     

两亲嵌段共聚物溶液内胶束形成的温度效应

合成了一系列具有两亲嵌段结构的聚（乙二醇）（PEO）一聚（丙二醇）（PPO）共聚物．利用荧光探针及示差量热法测定了共聚物水溶液的临界胶束形成温度（CMT）值．发现二嵌段共聚物（PEO－PPO）和三嵌段共聚物（PEO－PPO－PEO）有着类似的变化规律，即随共聚物分子中疏水链（PPO）长度的增大，其CMT值降低．但三嵌段共聚（PPO－PEO－PPO）则因疏水链段处于共聚物分子的两端，因而在溶液中有可能形成立体网状交联结构．此外，利用探针分子在不同极性溶剂中荧光峰值波长发生位移的现象可以对形成胶束内核的组织程度、极性大小进行估测．     

SYNTHESES OF STYRENE-METHYL METHACRYLATE BLOCK COPOLYMER BY POLYAZOAMIDE AS INITIATOR

Polyazoamide(PAA) was used as initiator to prepare block copolymer P(MMA-b-St) byfree radical polymerization. The fraction of block copolymer was about 50%. The structureof the block-copolymer was characterized by IR and the results of ~1H-NMR and GPCshowed that the content of the block and the molecular weight (M_w) of the prepolymerand block copolymer could be controlled by varying the mol ratio of styrene/PAA andMMA/prepolymer. DSC and TEM results revealed that the block copolymer has twoseparated glass transition temperatures and phase separation within the domain structure.     

Determination of thermodynamic properties of macroporous glycidyl methacrylate‐based copolymers by inverse gas chromatography

Macroporous crosslinked poly(glycidyl methacrylate‐co‐ethylene glycol dimethacrylate) (PGME) was synthesized by suspension copolymerization and modified by ring‐opening reaction of the pendant epoxy groups with ethylene diamine (EDA). Inverse gas chromatography (IGC) at infinite dilution was applied to determine the thermodynamic interactions of PGME and modified copolymer, PGME‐en. The specific surface areas of the initial and modified copolymer samples were determined by the BET method, from low‐temperature nitrogen adsorption isotherms. The specific retention volumes, V, of 10 organic compounds of different chemical nature and polarity (nonpolar, donor, or acceptor) were determined in the temperature range 333–413 K. The weight fraction activity coefficients of test sorbates, , and Flory–Huggins interaction parameters, , were calculated and discussed in terms of interactions of sorbates with PGME and PGME‐en. Also, the partial molar free energy, , partial molar heat of mixing, , sorption molar free energy, ΔG, sorption enthalpy ΔH, and sorption entropy, ΔS, were calculated. Glass transitions in PGME and PGME‐en, determined from IGC data, were observed in the temperature range 373–393 K and 363–373 K, respectively. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2524–2533, 2005     

表面活性剂对纤维素接枝共聚物溶液粘度性质的影响

研究了阴离子十二烷基硫酸钠(SDS)、阳离子十六烷基三甲基溴化铵(CTAB)和非离子聚乙二醇辛基苯基醚(OP)等三种不同类型的表面活性剂对疏水化水溶性两性纤维素接枝共聚物(CGAO)溶液粘度性质的影响.结果表明,在SDS和OP的临界胶束浓度(cmc)附近，CGAO溶液粘度最大，SDS引起CGAO粘度的变化大于OP；即使在CTAB的cmc附近，随着CTAB浓度的增加，CGAO的粘度一直呈下降趋势；非疏水改性的纤维素接枝共聚物的溶液粘度随SDS或CTAB浓度的增加而下降，但几乎不随OP浓度的增大而变化.此外，通过凝胶渗透色谱法测得的保留时间证实了SDS、CTAB和OP与CGAO之间的疏水缔合作用.