含环氧基的交联聚合物载体的制备方法对固定化青霉素酰化酶活性的影响

 以甲基丙烯酸缩水甘油酯为单体，N，N′－亚甲基双丙烯酰胺为交联剂，采用两种方法合成了大孔、珠状的交联聚合物固定化酶载体．用红外光谱、扫描电子显微镜及N2吸附等方法测定了其结构、比表面积、孔径分布和表观活性．结果表明，以液体石蜡为主介质、甲醇水溶液为致孔剂合成的聚合物GM1（60）作载体时，固定化酶水解青霉素G的活性达537U／g；以正庚烷与四氯乙烯混合溶剂为介质、甲酰胺为致孔剂合成的聚合物GM2（60）作载体时，固定化酶的活性较低，为426U／g．在37℃下连续进行10次间歇操作（每次反应10min）后，前者活性降至487U／g，保持了初始活性的90．7％；后者活性降至378U／g，保持了初始活性的88．7％．二者催化活性的不同是由于两种方法制备的载体在结构与性能上存在着明显的差异．GM1（60）载体孔径大，水中溶胀性能好，对青霉素酰化酶的偶联作用强，固定化效果显著．     

功能基化聚丙烯酸甲酯固定化青霉素酰化酶

合成了一系列大孔丙烯酸甲酯－二乙烯苯交联共聚物,经酰肼化、叠氨后固定青霉素酰化酶,考察了反应条件对固定化酶的影响,当交联剂用量为３０％,至孔剂量为１３０％,混合致孔剂（正庚烷与乙酸乙酯）中正庚烷的质量分数为５５％时,所制的载体经活化后得到的固定化酶酶活较高,为９５ｕ／ｇ（湿）,用分批式反应器连续水解青霉素Ｇ钾盐,使用６３批次后仍保留酶活７９．４％。     

大孔聚甲基丙烯酸缩水甘油酯固定化酶载体的合成及性能研究

选用反应性单体甲基丙烯酸缩水甘油酯，以N,N'-亚甲基双（丙烯酰胺）为交 联剂，甲酰胺为致孔剂，用反相悬浮聚合方法制得一系列珠状共聚物载体，通过测 定其表面的物化性能、表面的环氧基浓度和固定青霉素酰化酶活性，讨论了交联剂 用量、配比及合成条件对共聚物表面性能和固定化青霉素酰化酶活性的影响。     

含环氧基亲水性固定化青霉素酰化酶共聚载体的合成与性能研究

环氧基团可以在温和条件下与酶分子的氨基反应使其固定于载体表面.选用含有活性环氧基团的甲基丙烯酸缩水甘油酯(GMA)和亲水性的N-乙烯吡咯烷酮(NVP)两种单体,以N,N′-亚甲基双丙烯酰胺(MBAA)为交联剂,甲醇水溶液作致孔剂,液体石蜡为主介质,通过反相悬浮聚合技术成功地合成了亲水性大孔GMA-NVP-MBAA三元共聚物载体(GNM).通过调节交联剂的用量和单体NVP与GMA的比例,可以调节载体的孔径、比表面积及在水中的溶胀性能.将巨大芽孢杆菌青霉素酰化酶共价偶联于平均孔径为16.5nm、表面环氧基含量为0.906mmol/g的GNM共聚物载体,制成固定化酰化酶,其表观活性高达625U/g,水解青霉素G钾盐的最适宜温度为50℃,pH值为8.0.固定化酶在4℃保存40d,活性保持不变.经3次使用后,活性达到稳定值(601U/g左右),再经12次使用,活性几乎保持不变.     

微波辐射高效共价固定青霉素酰化酶

为提高青霉素酰化酶的共价固定化效率, 在微波辐射条件下将酶蛋白共价固定于介孔泡沫硅(MCFs)的孔道中. 通过正硅酸四乙酯水解缩合制备介孔泡沫硅, 再于微波辅助下将青霉素酰化酶共价固定在其孔道中. 以固定化酶相对活力和活力回收为指标, 考察了加酶量、固定化温度、微波辐射时间等条件对酶固定化效率的影响. 实验结果表明: 当加酶量为60 mg/g, 固定化温度为20 ℃, 微波辐射140 s, 固定化酶相对活力达到178.1%, 表观活力为1191.3 U/g(以湿重计). 与常规方法相比, 微波辅助固定化酶时, 固定化酶相对活力提高34.5%, 固定化时间亦大幅缩短至数分钟, 这为青霉素酰化酶的高效共价固定化提供了一条新的途径.     

青霉素酰化酶在含铁MCM-41介孔分子筛上的固定化研究

制备了具有长程有序结构、孔径分布狭窄的含铁MCM-41介孔分子筛，利用直接法和共价结合法将青霉素酰化酶固定在分子筛表面。结果表明，两种方法制备的固定化酶对青霉素G水解反应的表观活性分别为782U/g和256U／g；经6次连续操作使用，二者保持初始活性的49．4％和81．2％，后者的操作稳定性好于前者。共价结合法制备的固定化酶活性较低，是由于Fe—MCM-41表面修饰后比表面积和孔径明显减小所致。     

大孔载体对米曲霉氨基酰化酶的固定化研究

用合成的大孔丙烯酸甲酯-—二乙烯苯交联共聚物(聚丙烯酸甲酯)、丙烯酰胺-N,N′-亚甲基双丙烯酰胺交联共聚物(聚丙烯酰胺)及它们的功能基化产物作为固定化氨基酰化酶的载体。考察了载体性质对固定化氨基酰化酶效果的影响。比较了底物浓度、pH、磷酸缓冲液浓度、温度对氨基酰化酶溶液酶及固定化酶的影响。利用其中一种载体制成固定化酶柱,对DL-蛋氨酸进行了连续拆分,考察固定化酶的操作稳定性。     

亲水性交联聚合物载体的合成及其固定化青霉素酰化酶

选用含环氧基团的甲基丙烯酸缩水甘油酯(GMA)和亲水性的N-乙烯吡咯烷酮(NVP)单体,以N,N′-亚甲基双丙烯酰胺(MBAA)为交联剂,甲酰胺作致孔剂,通过反相悬浮聚合技术成功合成了一系列大孔、珠状GMA-NVP-MBAA三元共聚物载体.N-乙烯吡咯烷酮介入共聚物体系,使共聚物载体具有较强的亲水性,有利于青霉素酰化酶的固定化.通过调节交联剂的用量和单体NVP与GMA的比例,可以调节共聚物载体的孔结构与表面性能.用合成的平均孔径为15.7nm、表面环氧基含量1.11mmol·g-1亲水性珠状载体固定青霉素酰化酶,固定化酶水解青霉素G钾盐的活性达491U·g-1;在4℃保存30d,活性保持不变.经4次使用后活性达到稳定(444U·g-1),再经14次使用后,活性没有明显变化.     

聚丙烯酸载体用于青霉素酰化酶的固定

以反应性单体丙烯酸和交联剂二乙烯基苯,以石油醚为致孔剂,通过悬浮聚合制备固定化酶的载体,并用于对青霉素酰化酶的固定。研究了丙烯酸与二乙烯基苯以不同摩尔比对青霉素酰化酶固定活性的影响,以及悬浮聚合时水油相比例的不同所合成的载体对固定化酶性能的影响。当丙烯酸和二乙烯基苯摩尔比为84.2:4时合成的载体固定青霉素酰化酶的酶活为2784U/g,而水油相比为2.75:1（丙烯酸和二乙烯基苯摩洋比为84.2:5）时固定青霉素酰化酶活达到2183U/g。固定青霉素酰化酶可使青霉素转化,得到半合成青霉素的中间体6-氨基青霉烷酸,由此可制成高效、广谱、服用方便的新青霉素。     

介孔材料的修饰及固定青霉素酰化酶的稳定性研究

利用扩孔剂的作用合成出较大孔径(12 nm)的介孔材料SBA-15, 并进行表面氨基修饰, 以此为载体, 以戊二醛为交联剂, 对青霉素酰化酶进行组装固定, 并对固定化青霉素酰化酶(PGA)的稳定性进行了深入的研究. 实验结果表明, PGA与载体交联后仍保持活性. 热稳定性研究结果表明, 制备的固定化青霉素酰化酶在低于60 ℃时保持稳定; pH在6~11范围内保持稳定; 固定化酶重复使用10次之后, 仍具有高达90%的残留活力.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.