液体橡胶增韧环氧树脂/咪唑体系的形态与力学性能

液体橡胶增韧环氧树脂/咪唑体系的形态与力学性能;CTBN;HTBN; 增韧环氧树脂;形态结构;力学性能     

STUDY ON THE EPOXY RESIN TOUGHENED BY HYDROXY-TERMINATED BUTADIENE-ACRYLONITRILE COPOLYMER

Toughened epoxy resin with excellent properties was obtained by adding organic acid anhydride curing agent and hydroxy-terminated butadiene-acrylonitrile copolymer (HTBN), which is cheaper than CTBN. The anhydride reacts with both epoxy groups on epoxy resin and hydroxyl groups on HTBN. As a result the soft long chains of HTBN and the rigid chain of epoxy resin form one network, giving the resin toughness. Two-phase structure of the toughened resin was observed by SEM and TEM.     

丁腈羟增韧环氧树脂形态与力学性能

研究了丁腈羟增韧环氧树脂的力学性能和形态结构，丁腈羟的用量、丁腈羟中丙烯腈的含量、固化条件对所形成的微区尺寸都有较大影响，并进一步影响固化物的力学性能。     

聚酯-聚酯多嵌段共聚物的合成及其动态力学性能

聚酯-聚醚多嵌段共聚物的动态力学性能谱上有两个T_8,不宜做阻尼材料。本文报道聚对苯二甲酸乙二醇酯(PET)-端羟基聚己二酸乙二醇酯(PEA)共聚物(简称嵌段共聚酯),比聚醚-聚酯多嵌段共聚物有更好的相容性。我们研究了PEA的分子量,间苯二甲酸的用量对嵌段共聚酯的结晶度,以及结晶度对嵌段共聚酯的动态力学性能的影响。     

STUDIES ON THE ~(13)C-NMR SPECTRA OF ALTERNATING COPOLYMERS OF CONJUGATED DIENES WITH METHYL ACRYLATE

The ~(13)C-NMR spectra of alternating copolymers of conjugated dienes, butadiene (BD), isoprene(IP) and chloroprene (CP), with methyl acrylate (MA) were studied. It is proved that they are allalternating copolymers. The BD units in Poly (BD-alt-MA) are joined to MA mainly in the formof trans 1,4-structure. The contents of trans 1,4-, cis 1,4-and 1,2-structure are 88, 7 and 5%, res-pectively. The IP and CP units in Poly(IP-alt-MA) and Poly(CP-alt-MA) exist essentially as trans1,4-configuration and connect with MA units in "head to head" arrangement predominantly, whileCP-CP units present in Poly(CP-alt-MA) in a small quantity.     

网间交联型增韧环氧树脂/蓖麻油聚氨酯互穿网络聚合物的动态力学性能和形态结构

以增韧环氧树脂(TEP)和蓖麻油聚氨酯[PU(CO)]形成的互穿网络聚合物(IPN),两网络间具有一定数量的交联点,在一定组成下,该IPN的tanδ-T曲线半峰宽达100℃,tanδ最大值接近1,阻尼性能良好。形态研究表明,该IPN既有增韧环氧树脂本身的两相结构,又有IPN的两相结构。     

一种主链含非线性光学活性基团聚合物的合成

把非线性光学(NLO)发色基团引入到聚合物主链中,既可以增大聚合物中NLO基团的含量,从而提高聚合物的宏观NLO系数,又能够提高NLO聚合物的极化稳定性。本文报道一种由酚酞环氧树脂(PPh)与对硝基苯胺(NA)得到的NLO聚合物的合成及其极化松弛。 所用酚酞环氧树脂系自制,环氧值0.427。对硝基苯胺北京化工厂产,分析纯。N,N-二甲基甲酰胺为中国医药公司售品,化学纯,用前减压蒸馏精制,乙醇、丙酮均为北京化工厂生产,分析纯。在氮气保护下将等当量的PPh与NA溶于DMF中于150℃反应6～8小时后,倒     

聚环氧氯丙烷聚氨酯／聚（甲基丙烯酸甲酯－苯乙烯）IPN的研究

改变聚（甲基丙烯酸甲酯－苯乙烯）（Ｐ（ＭＭＡ－ｃｏ－Ｓｔ）中甲基丙烯酸甲酯的含量（Ｗ_（ＭＭＡ）），通过一步法合成出聚环氧氯丙烷聚氨酯（ＰＵ（ＰＥＣＨ）／Ｐ（ＭＭＡ－ｃｏ－Ｓｔ）ＩＰＮ．ＤＳＣ、ＴＥＭ和动态粘弹谱研究结果表明：当Ｐ（ＭＭＡ－ｃｏ－Ｓｔ）中Ｗ_（ＭＭＡ）大于０．６时，ＩＰＮ仅有一个Ｔｇ；当Ｗ_（ＭＭＡ）小于０．４时，ＩＰＮ有２个Ｔ_ｇ，ＴＥＭ上出现相区，Ｐ（ＭＭＡ－ｃｏ－Ｓｔ）溶度参数（δ）及δ的氢键作用分量（δｈ）与相态、力学性能有密切关系。     

疏水淀粉衍生物的制备

淀粉酯化;长链烯基琥珀酸酐;疏水淀粉衍生物的制备