活泼配盐[(μ-RE)(μ-E′)Fe_2(CO)_6][Et_3NH][E,E′=S,Se]的亲电反应研究——蝶状Fe_2SSe及Fe_2Se_2簇合物的合成及表征

本文由［（μｔＢｕＳ）（μＣＯ）Ｆｅ２（ＣＯ）６］［Ｅｔ３ＮＨ］和硒粉形成的［（μｔＢｕＳ）（μＳｅ）Ｆｅ２（ＣＯ）６］［Ｅｔ３ＮＨ］，分别与溴化苄，二碘甲烷及邻一、间一、对一双（溴甲基）苯反应，合成了蝶状Ｆｅ２ＳＳｅ单簇物（μｔＢｕＳ）（μＰｈＣＨ２Ｓｅ）Ｆｅ２（ＣＯ）６（３ａ）和双簇物［（μｔＢｕＳ）Ｆｅ２（ＣＯ）６］２（μＳｅＺＳｅμ）［Ｚ＝ＣＨ２，ｏ．ｍ．ｐ双（亚甲基）苯］（４ａｄ）。类似地，由［（μＰｈＳｅ）（μＣＯ）Ｆｅ２（ＣＯ）６］［Ｅｔ３ＮＨ］和硫粉或硒粉所形成的［（μＰｈＳｅ）（μＳ）Ｆｅ２（ＣＯ）６］［Ｅｔ３ＮＨ］或［（μＰｈＳｅ）（μＳｅ）Ｆｅ２（ＣＯ）６］［Ｅｔ３ＮＨ］分别与对一双（溴甲基）苯反应合成了蝶状Ｆｅ２ＳＳｅ和Ｆｅ２Ｓｅ２双簇物［（μＰｈＳｅ）Ｆｅ２（ＣＯ）６］２［μＳ（ｐＣＨ２Ｃ６Ｈ４ＣＨ２）Ｓμ］（５ａ）及［（μＰｈＳｅ）Ｆｅ２（ＣＯ）６］２［μＳｅ（ＰＣＨ２Ｃ６Ｈ４ＣＨ２）Ｓｅμ］（５ｂ）。所有产物均经元素分析、ＩＲ和１ＨＮＭＲ表征。     

LaDAIY型沸石的裂解活性和抗氮性能

采用脉冲微反技术,以含吡啶的正庚烷为原料,考察了LaDAlY型沸石的裂解和抗氮性能。结果表明,LaDAlY型沸石的裂解与抗氮性能均优于其母体样品DAlY。结合NH_3-TPD的数据,讨论了酸性与裂解和抗氮性能之间的关系,对吡啶中毒的机理进行了探讨。     

反复上呼吸道感染患儿发样微量元素锌,铜,铁检测结果分析

采用示波极谱法对１８３名反复上呼吸道感染患儿及１１８名健康体检儿同时进行发样锌，铁，铜测定，结果表明，反复上呼吸道感染儿发锌，铁均低于健康体检儿，有高度显著性差异，铜只在婴儿组反复感儿高于健康体检儿，其它各年龄组反复上感儿低于健康栓检儿或无显著性差异，说明以２儿童进行常规发样微量元素普查，发现低锌，低铁者及时给予补充，可减少感染性疾病的发生率。铜与免疫功能的关系尚待研究。     

Fe／ZrO_2气凝胶超细粒子催化剂的制备、表征及F－T反应性能的研究

用超临界流体干燥法制备出大孔高比表面高分散态Ｆｅ／ＺｒＯ_２气凝胶超细粒子催化剂，研究了在其制备过程中织构性质、颗粒大小、体相和表面结构的变化，并与普通浸渍法制备的Ｆｅ／ＺｒＯ_２催化剂作了对比。对几种Ｆｅ／ＺｒＯ_２催化剂的Ｆ－Ｔ反应性能考察表明，Ｆｅ／ＺｅＯ_２气凝胶超细催化剂显示出高的反应活性；随载体ＺｒＯ_２颗粒尺寸减小，活性组分铁的分散度变大，其颗粒尺寸变小，催化剂比表面积增大，反应活性增大，甲烷和低碳烃生成量增加，重质组分减少，认为产物烃分布主要受催化剂活性相颗粒尺寸效应制约。     

警惕锌剂治疗的毒性和副作用

临床实践证明某些疾病补锌治疗有效，但也发现1％左右的人出现副作用，人类对锌过量虽具有耐受性，但据报道不管是急性中毒量，治疗量，还是常用的自选补充量，均可出现中毒症状。原因是锌与其它元素间有相互作用，特别是与铜的拮抗作用，所以用锌剂一定要严格掌握适应症、剂量、疗程，以免引起不良反应，影响儿童健康。     

C(2×2)S/Fe(001)吸附体系的SCF-Xa-MS研究

采用SCF-X_α-MS方法, 对于C(2×2)S/Fe(001)吸附体系, 选择Fe_5S和Fe_9S两种原子簇模型, 研究了该吸附体系的电子结构、吸附成键特征及其相互作用图象。结果表明, S吸附于Fe(001)单晶表面具有较强的定域性质, S原子与底物Fe原子之间的吸附相互作用主要表现为S(3p)-Fe(4s,3d)之间的轨道相互作用。通过对表面吸附键长的优化, 其结果与X.S.Zhang等的ARPEFS的实验结果一致。     

ToF‐SIMS studies of the oxidation of Fe by D2O vapour: comparison with XPS

The oxidation of iron (Fe) by water (D₂O) vapour at low pressures and room temperature was investigated using time‐of‐flight (ToF) SIMS. The results supported those found previously using XPS and the QUASES^? program in that a duplex oxide structure was found containing a thin outer surface hydroxide (Fe(OD)₂) layer over an inner oxide (FeO) layer. The extraordinary depth resolution of the ToF‐SIMS profiles assisted in identifying the two phases; this resolution was achieved by compensation for surface roughness. A substantial concentration of deuterium was found in the subsurface oxide layer. This observation confirmed previous assessments that the formation of FeO was from the reaction of Fe(OD)₂ with outward‐diffusing Fe, leaving deuterium as a reaction product. Copyright © 2005 John Wiley & Sons, Ltd.     

Fluorescence quenching of anthropogenic fulvic acids by Cu(II), Fe(III) and UO(2)(2+)

The quenching of the fluorescence of three anthropogenic fulvic acids (FA) provoked by Cu(II) (pH 6.0), Fe(III) (pH 4.0) and UO₂²⁺ (pH 3.5), was analyzed by a non-linear method and by Stern-Volmer plots. The FA samples were extracted from composted sewage sludges (csFA), composted municipal wastes (mwFA) and composted livestock wastes (lsFA). Synchronous-scan fluorescence (SyF) spectra were collected as a function of metal ion concentration. Spectral data were treated by a self-modeling mixture analysis method (SIMPLISMA) to detect the SyF spectral band with the strongest quenching and to calculate the corresponding quenching profile. The analysis of these profiles by a non-linear method allowed the estimation of conditional stability constants (K) and of the percentage of non-complexing fluorophores. The same quantitative information was obtained by the modified Stern-Volmer equation taking into account the existence of fluorophores that do not participate in the complexation. Good agreement was found between the results of the two procedures. The log K calculated by the non-linear method were (standard deviation in parenthesis): csFA, Cu(II), 4.22 (5); Fe(III), 5.0 (1); UO₂²⁺, 5.2 (2); mwFA, Cu(II), 4.21 (3); Fe(III), 5.6 (2); UO₂²⁺, 4.7 (3); lsFA, Cu(II), 4.51 (8); Fe(III), 5.5 (2); UO₂²⁺, 3.6 (2).     

废水中偏二甲肼在Ni/Fe催化剂上的催化分解研究

研究了Ni/Fe催化剂对废水中偏二甲肼臭氧化分解的催化作用,考察了组分含量、体系的pH值和偏二甲肼初始浓度对催化反应的影响.结果表明,Ni/Fe催化剂对水中偏二甲肼的臭氧化具有良好的催化活性.催化剂组分含量、体系的pH值和初始浓度对反应的影响程度不大.对催化剂的XRD表征结果表明,催化剂主要由尖晶石结构的铁酸盐和FeNi3合金相组成,催化剂的良好催化性能与催化剂中尖晶石结构的铁酸盐和FeNi3合金相的形成有关.     

簇合物[Fe（DMF）6][W2S6]的合成,结构和性能研究

以(NH_4)_2WS_4、FeCl_3和NaS_2CNC_5H_(10)为原料,合成出[Fe(DMF)_6][W_2S_6]簇合物,用X射线衍射法测定了晶胞结构.其晶胞参数为a=0.8778(1)nm,b=0.9467(3)nm,c=1.1362(6)nm,α=71.506(1)°,β=74.775(2)°,γ=74.775(2)°,ν=0.84806nm~3,Z=1.晶体结构经块矩阵最小二乘法精修后,最终偏离因子R=0.0811.此外还进行了红外光谱、紫外可见光谱的测定.