THF—FER沸石的系列研究—1．晶体结构稳定性

四氢呋喃（THF）-Na2O-SiO2-Al2O3-H2O体系水热合成的THF-FER沸石，经酸交 换-焙烧脱THF（Ⅰ）或焙烧脱THF-酸交换（Ⅱ）的不同方式处理，均可制得低钠H- FER沸石。经XRD，^27Al与^29Si MAS NMR,低温氮吸附等表征证明，通过1273K高温 的热处理和1073K饱和水蒸气下的水热处理，H-FER沸石骨架保持高度稳定。在高温 水蒸气作用下，Si(2Al）容易从骨架上脱离，而Si(1Al）则保持相对稳定，以（Ⅱ ）方法处理，制备的H-FER沸石在水热条件下易产生较多的硅差劲基缺陷。经高温 热和水热处理后，H-FER沸石孔道结构基本保持完美、开放。     

氧化钡促进的Co/SiO2催化剂的还原性能和分解甲烷活性

 利用等体积浸渍法制备了氧化硅负载钴催化剂．通过程序升温还原、氢化学吸附、氧滴定和催化活性评价等手段研究了氧化钡对Co／SiO2的还原性能、钴分散度和颗粒度、分解甲烷活性及其稳定性等的影响．研究结果表明，氧化钡明显地影响Co／SiO2的还原性能；添加2％氧化钡提高了Co／SiO2在中温（450℃）条件下的还原度；氧化钡的还原对Co／SiO2还原的诱导、氧化钡与氧化硅及与氧化钴之间的相互作用是导致Co／SiO2还原性能变化的原因．氧化钡提高了Co／SiO2的初活性和钴的分散度，降低了钴的颗粒度；添加0．5％～1．5％氧化钡有利于提高Co／SiO2的稳定性．钴的分散度和颗粒度影响Co／SiO2的活性和稳定性；氧化钡的强供电效应也是提高Co／SiO2活性和稳定性的重要因素．甲烷分解生成的碳物种覆盖了钴活性中心，导致Co／SiO2初活性下降；但大部分碳物种并不沉积在钴活性中心上，可能形成了碳纤维生长在载体和钴活性中心之间．     

立方介孔相含钕氧化硅的合成与表征

以十六烷基三甲基溴化铵为结构导向剂，通过水热法合成了具有立方结构的含钕Nd-MCM-48介孔分子筛材料。XRD和TEM测试表明当n_Nd/n_Si<0.05时可以获得典型的长程有序介孔立方结构相，随n_Nd/n_Si比的增加，晶胞参数的增大和红外吸收光谱(FT-IR)的变化为Nd进入介孔分子筛骨架中提供了有力证据。N₂吸附-脱附实验给出了其BET表面积为1 195 m²·g^-1，BJH平均孔径为3.6 nm。紫外-可见漫反射光谱(UV-Vis)证明钕氧形成一种八面体结构。X射线光电子能谱(XPS)进一步证明钕主要以三价形式存在于立方介孔分子筛骨架中。     

CO2氧化异丁烷制异丁烯用Pd/V2O5-SiO2催化剂

 利用表面化学反应改性法制备了不同V2O5负载量的V2O5-SiO2表面复合物载体,进而采用等体积浸渍法制备了负载型Pd催化剂. 用N2吸附、 X射线衍射、透射电镜、 X射线光电子能谱、程序升温脱附、化学吸附-红外光谱和微反技术对系列Pd/V2O5-SiO2催化剂的比表面积、晶相结构、价态、异丁烷的化学吸附性能和CO2部分氧化异丁烷制异丁烯的催化性能进行了研究. 结果表明, Pd/V2O5-SiO2催化剂中的钒以V5+形式存在, V5+在催化剂表面形成活性位V=O, 其中 V=O 晶格氧与 i-C4H10分子的-CH3 和-CH 中的H产生化学吸附作用; 催化剂中金属Pd与V4+协同作用使CO2在催化剂上产生了卧式吸附态; 晶格氧参加了催化氧化反应,催化剂中 V5+←→V4+ 的变化构成了催化反应的氧化还原过程. 在525 ℃, CO2/i-C4H10体积比为1和空速为 1200 h-1的条件下,以Pd/25%V2O5-SiO2为催化剂时异丁烷转化率为22.8%, 异丁烯选择性为89.1%.     

Theoretical Study on the Structures and Stability of Isomers and Complex of[Si,C,O,O] Sytem

A detailed singlet potential energy surface(PES) of [Si,C,O,O] system including a van der Waals (vdW) comples SiO……CO2,eight isomers,and twelve transiton states is investigated by MP2 and QCISD(T) (single-point)methods.At the final QCISD(T)/6-311 G(2df)//MP2/6-311G(d) level with zero-point energy included,the complex SiO……CO is found to be thermodynamically and kinetically the most stable species.Although eight ismoers are located as local energy minima,they are rather unstable toward isomerization to the dissociation fragments or comples.For the reaction of silocon atoms with carbon dioxide,two competitive reaction channels are found,and the primary pathway,which leads to the products of SiO and CO fragments,is the direct oxygen-abstraction process from carbon dioxide by silicon atom with a41.16 kJ/mol reaction barrier height.Our predications are in good agreement with previous experimental and theoretical studies.     

载体对Rh基催化剂上甲烷解离活性的影响

采用脉冲反应技术、原位CO吸附和吡啶吸附红外光谱,考察了Al2O3和SiO2负载的Rh基催化剂上Rh-CeO2相互作用和CH4解离活性.结果表明,载体酸性对Rh-CeO2相互作用有显著影响.Rh/Al2O3催化剂中添加CeO2增加了载体Al2O3的Lewis酸位,使Al2O3接受电子的能力增强,从而降低Rh的电子密度,有利于CH4解离活化.相反,Rh/SiO2催化剂中添加CeO2减少了载体SiO2的Lewis酸位和酸强度,使SiO2难于接受电子,导致Rh的电子密度增加,不利于CH4解离活化.     

MoO3—SiO2表面复合物金属催化剂载体的制备与表征

采用ＭｏＯＣｌ４的盐酸溶液负载于ＳｉＯ２的表面反应法，制备了负载型和键联型两种ＭｏＯ３－ＳｉＯ２（ＭｏＳＯ）表面复合物载体。利用红外光谱法研究了ＭｏＳＯ的表面构造及其化学吸附性能；并利用ＴＰＲ技术考察了该表面复合物载体对负载金属Ｐｄ，Ｃｕ氧化物还原过程的影响。     

巯基功能化介孔材料高效锚定钯负载型催化剂的制备及其苯酚加氢催化性能

以含巯基官能团有机硅烷修饰的介孔材料MCM-41和SBA-15为载体, 采用浸渍-氢气还原法制备了高分散和高活性的负载型Pd催化剂. X射线衍射、N₂吸附-脱附和透射电子显微镜表征结果显示, 所制Pd催化剂Pd-SH-MCM-41和Pd-SH-SBA-15具有很好的长程有序结构、分布均匀的孔径、高比表面积及高度分散的Pd颗粒. 苯酚加氢反应结果表明, 以Pd-SH-MCM-41和Pd-SH-SBA-15为催化剂时, 在80℃, 1.0MPa反应1h, 苯酚转化率达99%以上, 环己酮选择性为98%. 它们的催化活性为商业Pd/C催化剂的5倍, Pd/MCM-41和Pd/SBA-15催化剂的3倍. 这可归因于介孔材料表面修饰的巯基官能团对Pd的锚定作用, 避免了Pd颗粒的团聚, 使其高度分散在介孔材料上.     

溶剂诱导翻转Pickering乳液用于原位循环使用酶催化剂

Separation and recycling of catalysts are crucial for realizing the objectives of sustainable and green chemistry but remain a great challenge, especially for enzyme biocatalysts. In this work, we report a new solvent-induced reversible inversion of Pickering emulsions stabilized by Janus mesosilica nanosheets (JMSNs), which is then utilized as a strategy for the in situ separation and recycling of enzymes. The interfacial active solid particle JMSNs is carefully characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), nitrogen sorption experiments, Fourier transform infrared (FT-IR) spectroscopy, and thermogravimetric analysis (TGA).The JMSNs are demonstrated to show order-oriented mesochannels with a large specific surface area, and the hydrophobic octylgroup is selectively modified on one side of the nanosheets. Furthermore, the inversion is found to be a fast process that is strongly dependent on the interfacial activity of the solid emulsifier JMSNs. Such a phase inversion is also a general process that can be realized in various oil/water phasic systems, including ethyl acetate-water, octane-water, and cyclohexane-water systems. By carefully analyzing the capacity of JMSNs with different surface wettabilities for phase inversion, a triphase contact angle (θ) close to 90° and a critical oil-water ratio of 1 : 2 are identified as the key factors to achieve solvent-induced phase inversion via a catastrophic phase inversion mechanism. Importantly, this reversible phase inversion is suitable for the separation and recycling of enzyme biocatalysts that are sensitive to changes in the reaction medium. Specifically, during the reaction, the organic substrates are dissolved in the oil droplets and the water-soluble catalysts are dispersed in the water phase, while a majority of the product is released into the upper oil phase and the enzyme catalyst is confined inside the water droplets in the bottom layer after phase inversion. The perpendicular mesochannels of JMSNs provide a highly accessible reaction interface, and their excellent interfacial activity allows for more than 10 rounds of consecutive phase inversions by simply adjusting the ratio of oil to water in the system. Using the enzymatic hydrolysis kinetic resolution of racemic acetate as an example, our Pickering emulsion system shows not only a 3-fold enhanced activity but also excellent recyclability. Because no sensitive chemical reagents are used in this phase inversion process, the intrinsic activities of the catalysts can be preserved even after seven cycles. The current study provides an alternative strategy for the separation and recycling of enzymes, in addition to revealing a new innovative application for Janus-type nanoparticles.     

Deposition of SiOx barrier films by O2/TMDSO RF-PECVD

This paper reports that the SiOx barrier films are deposited on polyethylene terephthalate substrate by plasmaenhanced chemical vapour deposition （PECVD） for the application of transparent barrier packaging. The variations of 02/Tetramethyldisiloxane （TMDSO） ratio and input power in radio frequency （RF） plasma are carried out to optimize barrier properties of the SiOx coated film. The properties of the coatings are characterized by Fourier transform infrared, water vapour transmission rate （WVTR）, oxygen transmission rate （OTR）, and atomic force microscopy analysers. It is found that the 02/TMDSO ratio exceeding 2：1 and the input power over 200 W yield SiOx films with low carbon contents which can be good to the barrier （WVTR and OTR） properties of the SiOx coatings. Also, the film properties not only depend on oxygen concentration of the inlet gas mixtures and input power, but also relate to the surface morphology of the coating.