激光触发多级多通道开关研究

 研究了200kV激光触发多级多通道开关的运行机理，该开关在直流电压下以四倍频Nd:YAG激光器为触发源进行的实验结果表明：开关触发延迟时间及其抖动随开关电压、激光能量和充气压力上升呈指数下降趋势，对混合气体则随气体密度上升而上升。随透镜焦距的增大延迟时间及其抖动呈上升趋势。该开关实现了多通道放电。     

传声器阵列声压级在线校准*

在户外环境中对某一目标噪声源进行声压级测量时,由于单个传声器不能在多声源干扰情况下有效监测目标信号,为了有效抑制非目标信号的干扰,通常利用传声器阵列进行波束形成从而对目标信号进行增强。MEMS传声器阵列由于体积小,价格低等优点而得到广泛使用,为了解决在户外进行噪声监测时,MEMS然而MEMS传声器阵列器件的工艺误差和灵敏度退化问题会导致波束形成滤波器的性能下降存在由器件工艺误差和老化所导致的声压级测量不准确问题,从而影响声压级的测量结果。为了解决这一问题,本文介绍了一种通过比较补偿参考传声器与传声器阵列之间的测量声压级之偏差进行从而实时在线校准的方法。该方法利用TDOA多声源定位方法在时频点上对实时采集的信号对所采集的信号在时频点上挑选有效目标信号进行有效挑选,并利用参考传声器的标准频响特性去修正阵列的声压级测量误差值。为了验证方法的可行性,本文通过实验比较了不同环境噪声干扰下的测量声压级差与无干扰条件下的测量声压级差的一致性,结果证明该校准方法在具有较好高的精确性和鲁棒性,并且可推广于任意一种阵型的传声器阵列声源定位装置噪声监测装置。     

Simulation of Dynamic Light Scattering Signals of Ultrafine Particles

In order to conveniently obtain dynamic light scattering (DLS) signal, a simulation method of DLS signal is proposed in this paper. This method regards the light intensity fluctuation of DLS as a stationary random process. According to autocorrelation function (ACF) of DLS signal, the stationary random process of DLS can be generated by auto‐regressive (AR) model. Signal simulations of several kinds of distribution particles and comparison of simulations and experiment prove that AR model can be used for DLS signal simulation. Moreover, by analyzing effect of simulation parameters on simulation precision, we obtained the relationship between simulation parameters and simulation precision. Finally, application of simulation signal verifies the effectiveness and convenience of this simulation method.     

Functionalized carbon nanotube/polyacrylonitrile composite nanofibers: fabrication and properties

The functionalized multi‐walled carbon nanotubes (f‐MWCNTs) were obtained by Friedel–Crafts acylation, which introduced aromatic amine groups onto the sidewall. And the grafted yield was adjusted by controlling the concentration of the catalyst. The composite solutions containing f‐MWCNTs and polyacrylonitrile (PAN) were then prepared by in‐situ or ex‐situ solution polymerization. The resulting solutions were electrospun into composite nanofibers. In the in‐situ polymerization, morphological observation revealed that f‐MWCNTs was uniformly dispersed along the axes of the nanofibers and increased interfacial adhesion between f‐MWCNTs and PAN. Furthermore, two kinds of f‐MWCNTs/PAN composite nanofibers had a higher degree of crystallization and a larger crystal size than PAN nanofibers had, so the specific tensile strengths and modulus of the composite nanofibers were enhanced. And the thermal stability of f‐MWCNTs/PAN from in‐situ method was higher than that of ex‐situ system. When the f‐MWCNTs content was less than 1 wt%, the specific tensile strengths and modulus of nanofibers were enhanced with increase in the amounts of f‐MWCNTs, and f‐MWCNTs/PAN of in‐situ system provided better mechanical properties than that of ex‐situ system. Copyright © 2010 John Wiley & Sons, Ltd.     

微尺度圆管内气体流量的实验测量

以氮气和氦气为工作介质,研究了微尺度(φ=17.6μm,17.9μm)圆管内压力驱动的气体流动,测量了在不同进出口压力下的流量,并与计算值进行了比较.结果表明,即使对于极低Mach数(M=0.003～0.03)流动,其可压缩性仍十分明显,它来源于微尺度效应.在本文的实验参数下,Kundsen数范围为3×10-3～7×10-3,表面滑移不明显,稀薄气体效应可以忽略.     

锡青铜基自润滑材料的摩擦学特性研究

采用粉末冶金自由烧结工艺制备出锡青铜基自润滑复合材料,对该类复合材料的力学性能与摩擦磨损特性进行了研究,从固体润滑剂角度就其室温与450℃自润滑机理进行了分析与探讨。研究结果表明,该类材料在室温至450℃温度范围内具有良好的机械性能与磨擦磨损特性。XRD分析结果显示：在室温下磨损表面形成的含石墨、Pb和SnO2的复合膜是其具有润滑性能的主要原因;在高温下则由石墨、Pb2O3和CuO组成的复合膜起主要润滑作用。     

全空间上半线性椭圆方程的正解

采用域扩线技巧与广义Mountain-Pass引理相结合的方法,给出了全空间上方程－Δu mu=u^p-1u的正确的存在性和光滑性。     

Oryzias latipes鱼体对不同形态镧的积累特征

在试验室条件下研究了Oryzias latipes鱼体对不同形态轻稀土La的积累特征及它对游离La吸收的动力学过程,并初步探讨了鱼对La的吸收机制。结果表明,试验鱼对La的积累量随水相游离La浓度增高、暴露时间增长而增加;水相富里酸的存在明显降低了La对鱼对生物有效性。此外,试验鱼也可以通过摄食获取水相中的La。     

血管紧张素转化酶活性抑制剂──丝素肽的分离、纯化和结构鉴定

 可溶性丝素粉末经碱性蛋白酶Alcalase水解后 ,其酶解产物对血管紧张素转化酶 (ACE)的活性有很强的抑制作用。采用凝胶过滤色谱SephadexG 15和反相高效液相色谱 (RP HPLC)对水解度为 2 0 %的酶解产物进行分离纯化 ,利用质谱鉴定其中一种ACE抑制剂是肽 ,其结构为Gly Tyr。     

用于蛋白同时复性及纯化的制备型装置中流动相用量的优化研究

 在生物大分子的高效液相色谱分离中 ,由计量置换保留模型可得出生物大分子在色谱柱上的保留行为取决于流动相中置换剂的浓度的结论。据此提出了用于蛋白同时复性及纯化的制备型装置 (USRPP)中最小流动相用量的估算公式 ,并进一步得出在保持最小流动相用量不变的条件下 ,改变流动相流速和线性梯度时间几乎不影响制备型USRPP分离蛋白的分离度和复性效率的结论。该结论与实验结果一致。