水中酚类化合物的液-液-液微萃取/ 高效液相色谱联用分析研究

建立了液-液-液微萃取/高效液相色谱联用(LLLME/HPLC)测定环境水中痕量酚类化合物2-甲基苯酚、2-硝基苯酚、2,4-二氯苯酚的分析方法,研究了有机相溶剂种类及其体积、料液相pH值与离子强度、接受相的体积、组成及浓度和搅拌速率、萃取时间等因素对分析物萃取效率的影响。实验结果表明,该方法对酚类化合物的富集倍数可达到404~747倍,方法的线性范围为0.2~300μg/L,RSD(n=6)为6.8%~11.4%。测定加标自来水、江水以及生活污水样品的回收率为83%~110%。     

Synthesis and Characterization of the Chiral Skeleton Cluster [NiRuMo(CO)_5(μ_3-S)(η~5-C_5H_5)(η~5-C_5H_4COCH_3)]

1 INTRODUCTION The chemistry of transition metal cluster has enjoyed an exceptional growth since the mid 1970s[1, 2], especially in recent years the structural and bonding aspects of mixed-metal tetrahedral skeleton clusters have been extensively studied[3]. One important reason is that such chiral cluster can induce an asymmetric catalysis potentially. In our research group, considerable efforts have been directed to the synthesis of chiral tetrahedral clusters containing four different…     

固溶体结构对Ca2-xSrxZn4Ti15O36∶Pr3+发光性质的影响

Ca_2-xSr_xZn₄Ti₁₅O₃₆∶Pr red long decay phosphor was synthesized by high temperature solid state reaction. Photoluminescence property and crystalline and unit cell parameters of the orthorhombic were investigated by fluorescence spectrophotometer and by powder X-ray diffraction, respectively. The emission intensity at 618 nm changes sharply when the concentration of Sr²⁺ (x) is less than 0.1 and the emission intensity reaches the maximum when x is equal to 0.007. There is an obviously broad excitation band at 270 nm when x is equal to 0.003 and it disappears gradually when x is over 0.01. The unit cell a parameter of Ca_2-xSr_xZn₄Ti₁₅O₃₆∶Pr decreases while c parameter increases with the increases of the concentration of the doped Sr²⁺. When x is over 0.1 the value of the unit cell parameters a and c become stable. TL peaks of Ca₂Zn₄Ti₁₅O₃₆∶Pr, Ca_1.993Sr_0.007Zn₄Ti₁₅O₃₆∶0.002Pr³⁺, 0.002Na⁺, are located at 62 ℃, 88 ℃, respectively, which indicates that there are deeper traps in Ca_1.993Sr_0.007Zn₄Ti₁₅O₃₆∶0.002Pr³⁺, 0.002Na⁺.     

磁性纳米固体酸SO42--TiO2-Fe3O4催化剂的合成、表征及催化性能的研究

首先研究制备了Fe3O4和SO42--TiO2固体酸催化剂,在此基础上采用共沉淀和浸渍的方法制备了磁性和超细SO42--TiO2-Fe3O4固体酸催化剂。利用XRD,TEM和FT-IR等分析测试手段对催化剂的结构和性能进行了表征。测定结果证实该催化剂具有较小的粒度,较高的磁性表现。在乙酸丁酯合成反应中SO42--TiO2-Fe3O4展示了很高的催化活性(酯化率可达82.7%),而且利用Fe3O4的磁性可对催化剂进行分离和回收.     

一种新型钛体系（Ⅳ）──α－酮酸钛酸酯与锂试剂的还原反应

一种新型钛体系（Ⅳ）──α－酮酸钛酸酯与锂试剂的还原反应段新方，尹承烈（北京师范大学化学系，北京，１００８７５）关键词加成，还原，钛酸酯，交换反应由于钛的优良调整作用，使得锂试剂ＲＬｉ不仅可以和α－酮酸钛酸酯ＡｒＣＯＣＯＯＴｉ（ＯＲ１）３中的酮发生加...     

μ-氧-双[三(对氟苄基)锡]的合成、表征及晶体结构

The μ-oxygen-bis[tri(p-fluorobenzyl)tin] was synthesized. The structure were characterized by elementary analysis, IR and ¹H NMR and the crystal structure were determined by X-ray single crystal diffraction. The crystal of the title compound belongs to rhombohedral with space group R, a=1.346 4(4), b=1.346 4(4), c=1.772 9(7) nm, α=90°, β=90°, γ=120°, Z=3, V=2.783 2(15) nm³, D_c=1.625 g·cm^-3, μ(Mo Kα)=1.408 mm^-1, S=1.088, F(000)=1 350, R₁=0.027 5, wR₂=0.065 9. In compound, the tin atom has a distorted tetrahedral coordination configuration. CCDC: 257079.     

活性炭负载纳米TiO2光催化降解性能研究

本文研究活性炭负载纳米TiO2的光催化降解性能和影响甲基橙废水处理的主要因素。结果表明:用溶胶-凝胶法制备的TiO2-活性炭催化剂具有比表面积大、分散性高、光催化降解性能好、可重复利用等优点;采用30W高硼紫外光灯,TiO2-活性炭光催化降解浓度为1500mg/L甲基橙废水的最优工艺条件是:催化剂活化温度为700℃、用量为1.0g/L、废水起始pH值为1、反应温度为45℃、光照时间为50m in。在此条件下,甲基橙和CODC r的去除率分别达99.8%和99.7%。     

Synthesis and Crystal Structure of a Tetranuclear Silver Complex with Bis（diphenylphosphino） amine-dioxide as a Tridentate Ligand

1 INTRODUCTION The coordination chemistry of the nitrogen-contai- ning diphosphine ligand bis(diphenylphosphino)ami- ne (Ph2PNHPPh2) has recently received much atten- tion because the P atoms can bridge metal centers in μ-bonding mode to form bi- or polynuclear complex- es[1~10]. It has been shown that the acidity of N–H proton would promote functionalization on the ligand backbone[4, 5, 11]. Although a few complexes contain- ing deprotonated tridentate Ph2PNPPh2 have been synthesi…     

由藜芦醛合成娃儿藤碱

以藜芦醛(1)、3,4-二甲氧基苯乙酸(2)、(S)-L-脯氨酸(6)等为原料,经8步反应,合成了一种抗肿瘤活性(s)-( )-娃儿藤碱。先由化合物1和2在乙酸酐/三乙胺催化下反应得到3,4-二甲氧基一反式-α-(3′, 4′-二甲氧基苯基)．肉桂酸(3),在0℃、三氟乙酸存在下用VOF_3对其关环成2,3,6,7-四甲氧基-9-羧基菲(4),然后用喹啉作介质,在230℃、无水CuSO_4催化下脱去羧基,得到2,3,6,7-四甲氧基菲(5),再和(S)-N- (三氟乙酰)-L-脯氨酰氯(6b)傅-克反应得到(S)-N-(三氟乙酰基)-2,3,6,7-四甲氧基-9-L-脯氨酰基菲(7),并对产物进行了柱纯化,所得产物在三氟化硼乙醚存在下用三乙基硅烷还原羰基,然后脱去三氟乙酰保护基,最后在盐酸存在下用甲醛闭环得到目标产物(10)。用NMR和MS表征了中间体和目标产物的结构。该合成反应条件温和,总收率为3．5％,产品纯度98．5％(HPLC)。     

高频燃烧红外吸收光谱法测定钨钛合金中碳含量

建立高频燃烧红外吸收光谱法测定钨钛合金中碳含量的分析方法。在1980 W分析功率下,称取0.3 g样品,以2.0 g钨锡及0.5 g纯铁混合助熔,用高频红外分析仪测定碳。碳的含量在0.013%~0.050%范围内与红外吸收峰面积线性相关,相关系数为0.9993。碳的测定下限为3.6μg/g,方法检出限为1.08μg/g。该法测定结果的相对标准偏差为2.97%~4.11%(n=8),碳的加标回收率为96.2%~103.1%。该方法能够满足合金中碳含量的分析要求。