武器系统生存能力模型分析

对抗过程中，武器系统的生存概率包括以下的四个方面，即：被发现的可能性、被命中的可能性、易毁性和可修理性。武器系统生存能力的动态描述主要划分为四个阶段：被发现阶段、被命中阶段、被毁伤和修复阶段。本文从这四个阶段给出了对抗过程中武器系统生存能力的动态描述，并分析了各个阶段的计算模型。     

退火温度对低温生长MgxZn1－xO薄膜光学性质的影响

用射频磁控溅射法在80℃衬底温度下制备出Mg_xZn_1-xO(x=0.16)薄膜，用X射线衍射(XRD)、光致发光(PL)和透射谱研究了退火温度对Mg_xZn_1-xO薄膜结构和光学性质的影响.测量结果显示，Mg_xZn_1-xO薄膜为单相六角纤锌矿结构，并且具有沿c轴的择优取向；随着退火温度的升高，(002)XRD峰强度、平均晶粒尺寸和紫外PL峰强度增大，(002)XRD峰半高宽(F 关键词： xZn_1-xO薄膜')" href="#">Mg_xZn_1-xO薄膜 射频磁控溅射 退火     

Preparation of antimicrobial poly(vinyl alcohol) nanofibers containing silver nanoparticles

Polyvinyl alcohol (PVA) nanofibers containing Ag nanoparticles were prepared by electrospinning PVA/silver nitrate (AgNO₃) aqueous solutions, followed by short heat treatment, and their antimicrobial activity was investigated for wound dressing applications. Since PVA is a water soluble and biocompatible polymer, it is one of the best materials for the preparation of wound dressing nanofibers. After heat treatment at 155 °C for 3 min, the PVA/AgNO₃ nanofibers became insoluble, while the Ag⁺ ions therein were reduced so as to produce a large number of Ag nanoparticles situated preferentially on their surface. The residual Ag⁺ ions were reduced by subsequent UV irradiation for 3 h. The average diameter of the Ag nanoparticles after the heat treatment was 5.9 nm and this value increased slightly to 6.3 nm after UV irradiation. It was found that most of the Ag⁺ ions were reduced by the simple heat treatment. The PVA nanofibers containing Ag nanoparticles showed very strong antimicrobial activity. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2468–2474, 2006     

Shadowing and Inverse Shadowing for C^1 Endomorphisms

In this paper, we consider the shadowing and the inverse shadowing properties for C^1 endomorphisms. We show that near a hyperbolic set a C^1 endomorphism has the shadowing property, and a hyperbolic endomorphism has the inverse shadowing property with respect to a class of continuous methods. Moreover, each of these shadowing properties is also ＂uniform＂ with respect to C^1 perturbation.     

掺Eu3+硅基材料的发光性质

通过溶胶－凝胶技术制备了掺Eu^3 的硅基材料并测试了其三维荧光光谱、激光谱和发射光谱，结果显示，最佳激发波波长为350nm,最强荧光波长为620nm；在350nm光激发下的发射光谱显示Eu^3 的特征发射光谱，产生4条谱带，分别是577nm(^5D0-^7F0)，588nm(^5D0-^7F1),596nm(^5D0-^7F1)和610nm(^5D0-^7F2)。     

Wintner定理的推广与全局光滑线性化

微分方程光滑线性化的研究,目前仅限于原点近傍的小邻域,本文给出了一个全局光滑线性化的结论.全局拓扑线性化或全局光滑线性化的先决条件是任一解的存在区间为全实轴.因此,本文也讨论了Wintner定理的推广问题.     

La0.82Te0.18MnO3薄膜的输运特性和光诱导效应

用脉冲激光沉积法制备了非金属Te掺杂的钙钛矿锰氧化物La_0.82Te_0.18MnO₃单晶薄膜.该薄膜从83 K升温至373 K过程中发生金属-绝缘体相变，转变点温度为283 K.其电阻率在T<T_MI时符合电子-电子、电子-磁振子散射公式；在T>T_MI时为小极化子输运.薄膜在低温段连续激光(波长为532 nm，40 mW)作用下电阻率显著增大，电阻变化率在253 K达到最大值51.1%,该变化率远大于相同条件下的空穴掺杂材料；在高温段产生了较小的光电导，电阻变化率小于10%.这些现象主要与激光激励下自旋系统和小极化子的变化有关.La_0.82Te_0.18MnO₃薄膜在激光诱导下具有明显的与自旋相关的弛豫现象.激光开始作用时薄膜电阻率随时间的变化符合指数关系. 关键词： 0.82Te_0.18MnO₃薄膜')" href="#">La_0.82Te_0.18MnO₃薄膜 光诱导 输运特性 电子掺杂     

标的股价服从混合过程的期权定价公式及有限元算法

本文将马尔科夫跳跃过程叠加于 Ito过程 ,形成混合过程 ,并用该过程来刻画股价走势情况。而后在标的股价服从混合过程的基础上 ,推导出了欧式看涨期权的定价公式 ,并对美式看跌期权定价给出了有限元算法。     

混杂配体金属簇合物的分子振动光谱与结构

由于原子簇化合物在催化，生物活性，功能材料等方面所呈现的重要性，使其成为无机和物理化学最重要的研究领域之一。文章中和谱学方法对一些具有混配体的过渡金属簇合物的结构及其两者之间的关系进行.     

Effects of Processing Parameters on Microstructure and Properties of Nanoscale ZrC/ZrB2 Multilayered Coatings

ZrC/ZrB2 multilayered coatings with bilayer periods of 3.5-40nm are synthesized by rf magnetron sputtering. Analyses of x-ray diffraction, scanning electron microscopy and nanoindentation indicate that multilayered coatings possess much higher hardness and greater fracture resistance than monolithic ZrC and ZrB2 coatings. A maximum hardness （41.TCPa） and a critical fracture load （73.7mN） are observed in the multilayer with A = 32 nm deposited at the substrate bias -40 V. Higher residual stress built in the ZrC layer can be released by periodic insertion of ZrB2 into the ZrC layer. A clear multilayered structure with mixed ZrB2（001）, ZrB2 （002） and ZrC （111） orientations should be responsible for the enhanced mechanical properties.