新型镍催化剂催化乙烯聚合的阳离子机理

含氮氧配位原子的镍催化剂是一类新型催化剂.文章以配体为[NH=CH－CH=CH－O]的镍催化剂为模型,用密度泛函方法（DFT）在B3LYP/LANL2MB水平上研究了该类乙烯聚合催化的反应机理.计算结果表明,催化的反应过程中,中心原子镍最先形成带空位的四边形阳离子配合物,乙烯以垂直于催化剂平面的方式占据空位,然后旋转到催化剂平面内以利于插入反应的进行；插入反应发生后,在催化剂中Ni和β-C之间形成一种氢桥键,协助新空位的形成,实现链的增长.     

锐钛相虫蛀状介孔二氧化钛的表征

0IntroductionMesostructuredtitania(TiO2)hasattractedagreatdealofattention,inviewofcontrolleddelivery,catalytic,photocatlytic,orenergyconversionapplica-tions犤1犦.Theuseoftitaniumisopropoxidebis-acetylace-tonateprecursors,combinedwithalkylphosphatean-ionicsurfactantsastemplate,ledtothefirstdocu-mentedpuremesoporousTiO2犤2犦.Insubsequentyears,moresyntheticstrategieshavebeendevelopedusingavarietyofstructure-directingagents,forexample,car-boxylicacids犤3犦,alkylamine犤4犦,aminium犤5犦,blockcop-o…     

FREE STANDING FILM OF POLYANILINE

A free standing film of polyaniline as large as 18 cm×18cm×0.002 cm can be obtained by evaporation of a solution of the chemically synthesized base in NMP. Its structure was examined by the elemental analysis, IR, U.V.-visible spectra, XPS, DSC, SEM and X-ray scattering and its conducting behavior as well as electrochemical properties were studied. Results show that the composition, structure of main chain, physical properties of the free standing film of polyanilme is similar to that of the powder. However, some differences in its electronic structure, conductivity at room temperature and potential of redox couple between the flee standing film and powder are observed, which may be due to cross-linking of the film of polyaniline.     

IMMOBILIZATION OF POTENTIALLY BIOACTIVE MOIETIES ONTO POLYETHER WITH POLY(ETHYLENE GLYCOL)-SULFONATE SPACER

A new reactive graft copolymer, poly(tetramthylene glycol) - graft-w-propyl sodiumsulfonate-poly(ethylene glycol) (PTMG-g-PEG-CH_2CH_2CH_2SO_3~-Na~+), was synthesizedby the cationic polymerization of a-w-bifunctional PEG macromonomer (O?CH_2—PEG——CH_2 CH_2 CH_2 SO_3 Na) and THF. The obtained copolymer exhibits the expected structureas indicated by the result of characterization. Two amino acids (L-arginine, L-tyrosine)were covalently attached to the copolymer after converting the sulfonate group to sulfonylchloride. So the new reactive graft copolymer (PTMG-g-PEG-CH_2CH_2CH_2SO_3~-Na~+) isexpected to be very useful in attachment of potentially bioactive moieties to polymer viaa hydrophilic PEG spacer.     

3, 6-二取代-均三唑并[3, 4-b]-1, 3, 4-噻二唑的合成

研究了2-苯基-1, 2, 3-三唑-4-羧酸(1)与3-烷基/芳基-4-氨基-5-巯基-1, 2, 4-三唑(2a～o)在POCl~3催化下, 脱水缩合得到15个新的3-烷基/芳基-6-(2'-苯基-1', 2', 3'-三唑-4'-基)均三唑并[3,4-b]-1, 3, 4-噻二唑类化合物(3a～o)。     

一种制备单分散SiO2空心微球的新方法

在乙醇/氨水介质中, 分别以分散聚合和无皂乳液聚合方法制得的不同粒径聚苯乙烯(PS)微球为模板, 以正硅酸乙酯(TEOS)为前驱体, 通过控制介质中氨水的初始体积, 一步法制得了不同粒径的单分散SiO2空心微球. 整个过程无需添加其它溶剂溶解或高温煅烧的方法来除去模板微球. 对SiO2空心微球进行测试表征, 提出了SiO2空心微球的可能形成机制.     

Effects of Calcination Temperature on the Acidity and Catalytic Performances of HZSM-5 Zeolite Catalysts for the Catalytic Cracking of n-Butane

The acidic modulations of a series of HZSM-5 catalysts were successfully made by calcination at different treatment temperatures, i.e. 500, 600, 650, 700 and 800 ℃, respectively. The results indicated that the total acid amounts, their density and the amount of B-type acid of HZSM-5 catalysts rapidly decreased, while the amounts of L-type acid had almost no change and thus the ratio of L/B was obviously enhanced with the increase of calcination temperature (excluding 800 ℃). The catalytic performances of modified HZSM-5 catalysts for the cracking of n-butane were also investigated. The main properties of these catalysts were characterized by means of XRD, N2 adsorption at low temperature, NH3-TPD, FTIR of pyridine adsorption and BET surface area measurements. The results showed that HZSM-5 zeolite pretreated at 800 ℃ had very low catalytic activity for n-butane cracking. In the calcination temperature range of 500-700 ℃, the total selectivity to olefins, propylene and butene were increased with the increase of calcination temperature, while, the selectivity for arene decreased with the calcination temperature.The HZSM-5 zeolite calcined at 700 ℃ produced light olefins with high yield, at the reaction temperature of 650 ℃ the yields of total olefins and ethylene were 52.8% and 29.4%, respectively. Besides, the more important role is that high calcination temperature treatment improved the duration stability of HZSM-5zeolites. The effect of calcination temperature on the physico-chemical properties and catalytic performance of HZSM-5 for cracking of n-butane was explored. It was found that the calcination temperature had large effects on the surface area, crystallinity and acid properties of HZSM-5 catalyst, which further affected the catalytic performance for n-butane cracking.     

室温离子液体EMIES的标准生成焓

在(298.15 ±0.01) K下用转动弹热量计测定了离子液体硫酸乙酯-1-甲基-3-乙基咪唑(EMIES)及合成它的原料1-甲基咪唑的恒容燃烧热,通过计算得到它们的标准燃烧焓 分别为(－2671±2) 和(－286.3±0.5) kJ·mol－1;标准生成焓 分别为(－3060±3) kJ·mol－1和(－2145±4) kJ·mol－1.结合文献上硫酸二乙酯的标准生成焓数据,得到了合成离子液体EMIES的反应热(－102.3±1.0) kJ·mol－1,与合成实验中观察到的强烈放热现象是一致的.根据离子液体EMIES的热容数据,计算了不同温度下EMIES的标准生成焓.     

Ni添加对0.4Zr0.1V1.1Mn0.5Cr0.1合金的相结构和电化学性能的影响

本文通过XRD、SEM、EDS研究了Ti_0.4Zr_0.1V_1.1Mn_0.5Cr_0.1Ni_x(x=0，0.2，0.4，0.6，0.8)合金的相结构和电化学性能。该合金系由BCC结构的V基固溶体主相和六方结构的C14 Laves第二相组成，Ni能够促进第二相的生成，Ni含量的增加导致了各相中的化学组成和晶格参数的变化，并通过电化学方法研究了Ni含量对_0.4Zr_0.1V_1.1Mn_0.5Cr_0.1合金电极的最大放电容量、自放电性能、高倍率放电性能、循环稳定性能等的影响。     

ZrO2-TiO2-CeO2的制备及其在NH3选择性催化还原NO中的应用

采用共沉淀法制备了载体材料TiO2、ZrO2-TiO2及ZrO2-TiO2-CeO2, 并利用X射线衍射(XRD)实验、比表面积测定(BET)、程序升温脱附(NH3-TPD)、储氧性能测定(OSC)及程序升温还原(H2-TPR)等方法对三种载体材料进行了表征. 结果表明, ZrO2-TiO2-CeO2具有较多的表面强酸位, 并具有一定的储氧性能和较强的氧化还原性能. 以三种材料为载体, 制备了质量分数分别为1%、9%的V2O5、WO3的整体式催化剂. 研究了三种催化剂在富氧条件下用NH3选择性催化还原NO的催化性能. 结果表明, 以ZrO2-TiO2-CeO2为载体的催化剂在反应空速为10000 h-1, 275 ℃时, NO的转化率接近100%, 具有最好的催化活性,并有良好的应用前景。