稀土元素取代对Ti0.26Zr0.07V0.24Mn0.1Ni0.33贮氢合金结构和电化学性能的影响

研究了5种稀土元素部分取代V对Ti_0.26Zr_0.07V_0..24Mn_0.1Ni_0.33合金的微观结构和电化学性能的影响。结果表明,Ti_0.26Zr_0.07V_0.24Mn_0.1Ni_0.33和Ti_0.26Zr_0.07V_0.24-xMn_0.1Ni_0.33RE_x（x=0.005;RE=La,Ce,Nd,Ho,Y）均由体心立方结构的钒基固溶体相和六方结构的C14Laves相组成。在合金中加入稀土元素,会使合金中两相的晶胞体积同时增大。稀土元素部分取代V均改善了合金电极的活化性能。La和Nd元素取代后,合金电极的最大放电容量明显增加,而Ce的取代提高了合金电极的循环稳定性。Ce,Nd,Ho,Y均改善了合金电极的倍率放电性能。合金电极在高温状态下表现出了良好的放电性能,其中Nd在333K时放电容量可达550.4mAh·g^-1。稀土元素对荷电保持率的影响各异。     

硼的添加对Ti0.26Zr0.07V0.24Mn0.1Ni0.33贮氢合金结构和电化学性能的影响

Ti_0.26Zr_0.07V_0.24Mn_0.1Ni_0.33Bx(x=0~0.10)系列合金均有V基固溶体相和C14型Laves相两相组成。添加B可提高Ti_0.26Zr_0.07V_0.24 Mn_0.1Ni_0.33合金的放电容量, Ti_0.26Zr_0.07V_0.24Mn_0.1Ni_0.33B0.1合金电极在60 mA·g^-1电流放电时的放电容量达到476.7 mAh·g^-1.B的添加不同程度地降低了合金的高倍率放电性能, 使合金电极表面上电化学反应的电荷转移电阻(R_ct)显着增加, 交换电流密度(I₀)显着降低。添加B可显着改善Ti_0.26Zr_0.07V_0.24Mn_0.1Ni_0.33合金电极的高温放电性能, Ti_0.26Zr_0.07V_0.24Mn_0.1Ni_0.33B_0.025合金电极在343 K高温下其放电容量达到525.6 mAh·g^-1.     

混合稀土对A2B7型储氢合金结构和电化学性能的影响

采用感应熔炼方法制备了A₂B₇型La_0.83-0.5x（Pr_0.1Nd_0.1Sm_0.1Gd_0.2）_xMg_0.17Ni_3.1Co_0.3Al_0.1（x=0~1.66）储氢合金,并在He+Ar气氛和 1 173 K下进行退火处理。通过X射线衍射（XRD）、扫描电子显微镜（SEM）和电化学方法,研究了混合稀土（Pr,Nd,Sm,Gd）替代La元素对合金物相结构和电化学性能的影响。合金相结构分析表明,混合稀土含量对合金组成和相结构有重要的影响,随混合稀土含量x的增加,合金中主相A₂B₇型（2H-Ce₂Ni₇型+3R-Gd₂Co₇型）相丰度逐渐增多,其中2H-Ce₂Ni₇型相丰度先增多后减少,3R-Gd₂Co₇型相丰度则逐渐增加,主相晶胞参数随x增加而减小。电化学结果表明,随混合稀土含量增加,放氢平台压逐渐升高,合金电极的最大放电容量和循环稳定性均呈先增大后减小的规律,其中x=0.4合金电极具有最高的电化学放电容量（389.8 mAh·g^-1）和最佳的循环寿命（S₁₀₀=91.30%）;合金电极的高倍率放电性能（HRD）则随x的增加获得显著提高。适量的混合稀土替代量可显著改善合金电极的综合电化学性能。     

Ni添加对Ti0.4Zr0.1V1.1Mn0.5Cr0.1合金的相结构和电化学性能的影响

本文通过XRD、SEM、EDS研究了Ti0.4Zr0.1V1.1Mn0.5Cr0.1Nix(x=0,0.2,0.4,0.6,0.8)合金的相结构和电化学性能.该合金系由BCC结构的V基固溶体主相和六方结构的C14 Laves第二相组成,Ni能够促进第二相的生成,Ni含量的增加导致了各相中的化学组成和晶格参数的变化,并通过电化学方法研究了Ni含量对Ti0.4Zr0.1V1.1Mn0.5Cr0.1合金电极的最大放电容量、自放电性能、高倍率放电性能、循环稳定性能等的影响.     

锂离子电池正极材料LiNi0.75-xCoxMn0.25O2的合成及电化学性能研究

以LiOH·H₂O、Ni(OAc)₂·4H₂O、Co(OAc)₂·4H₂O和MnO₂为原料，在水热反应釜中预处理，然后进行高温固相反应，合成了一系列锂镍钴锰氧化物LiNi_0.75-xCo_xMn_0.25O₂(x=0.05,0.10,0.15,0.20,0.25)。通过X射线衍射(XRD)、扫描电子显微镜（SEM）和电化学性能测试对所得样品的结构、形貌、粒径及电化学性能进行了表征。结果表明，当x=0.20时，所合成的正极材料具有很好的α-NaFeO₂型层状晶体结构，晶胞参数a=0.286 1 nm，c=1.416 4 nm， V=0.100 4 nm³，以50 mA·g^-1的电流密度在3～4.3 V(vs Li/Li⁺)充放电时，首次放电比容量达172.5 mAh·g^-1，首次放电效率高达90.9%，30个循环后其放电比容量依然保持在161.1 mAh·g^-1。     

Ba0.98Bi0.02(Ti0.9Zr0.1)1-xCuxO3陶瓷的介电性能、弛豫行为与结晶化学特性

采用固相合成法, Bi3+作施主掺杂A位, Cu₂₊作受主掺杂B位, 制备了Ba_0.98Bi_0.02(Ti_0.9Zr_0.1)_1-xCu_xO₃(x=0, 0.01, 0.02, 0.03)陶瓷样品。借助XRD、LCR等研究了该陶瓷的结构与介电性能。结果表明:当x=0.03时, 陶瓷样品出现第二相。通过GULP模拟, 缺陷偶极子的稳定性从低到高依次为:[2Bi_Ba^·+V_Ba"]、[2Bi_Ba^·+Cu_Ti/Zr"]、[Cu_Ti/Zr"+V_O^··], 结合实验可知:介电弛豫程度与晶体中缺陷偶极子的存在形式相关, 其中x=0.01时, 晶体中以[2Bi_Ba^·+Cu_Ti/Zr"]为主。随Cu₂₊掺杂量的增加, 介电常数增加, 介电常数与B位键价和呈反比变化、与八面体BO₆的体积呈正比变化。     

Al含量对AB5型储氢合金电极低温和高倍率性能的影响

系统地研究了Al含量对富Ce储氢合金MmNi_4-xCo_0.7Mn_0.3Al_x（x=0,0.1,0.2,0.3）电极综合电化学性能,尤其是对低温和高倍率性能的影响。在常温下,储氢合金电极放电容量和循环性能均随着Al含量的增加而增加,而高倍率放电性能严重下降。-20℃时,放电容量仍随着Al含量的增加而增加,但在-40℃下放电容量随之严重衰退。电化学动力学结果表明,常温下高Al合金高倍率性能的降低主要是由于电极表面电荷转移过程的恶化;低温-40℃下,Al同时降低了合金电极的表面电催化活性以及体相H扩散能力,严重恶化电极过程动力学,从而导致了高Al合金极低的容量及电压输出。考虑到各电极的综合电化学性能,MmNi_3.8Co_0.7Mn_0.3Al_0.2为最佳的成分配比。     

Al含量对AB5型储氢合金电极低温和高倍率性能的影响

系统地研究了Al含量对富Ce储氢合金MmNi_4-xCo_0.7Mn_0.3Al_x（x=0,0.1,0.2,0.3）电极综合电化学性能,尤其是对低温和高倍率性能的影响。在常温下,储氢合金电极放电容量和循环性能均随着Al含量的增加而增加,而高倍率放电性能严重下降。-20℃时,放电容量仍随着Al含量的增加而增加,但在-40℃下放电容量随之严重衰退。电化学动力学结果表明,常温下高Al合金高倍率性能的降低主要是由于电极表面电荷转移过程的恶化;低温-40℃下,Al同时降低了合金电极的表面电催化活性以及体相H扩散能力,严重恶化电极过程动力学,从而导致了高Al合金极低的容量及电压输出。考虑到各电极的综合电化学性能,MmNi_3.8Co_0.7Mn_0.3Al_0.2为最佳的成分配比。     

Mg0.9Ti0.1Ni1－xCox (x＝0.05, 0.1, 0.15, 0.2)合金的合成及电化学性能研究

采用机械合金化法合成了Mg_0.9Ti_0.1Ni_1－xCo_x (x＝0.05, 0.1, 0.15, 0.2)系列四元合金, 并对该系列合金的结构和电化学性能等方面进行了研究. 球磨100 h的该系列合金, XRD结果表明, X射线衍射峰均呈现宽化趋势, 基本呈非晶态. 充放电结果表明, 该系列合金具有较好的活化性能, 它们的循环稳定性明显好于MgNi合金, 其中Mg_0.9Ti_0.1Ni_0.8Co_0.2最大放电容量最高, 为427.5 mAh•g^－1. 在充放电循环过程中, Mg在合金表面形成了Mg(OH)₂是合金电极衰减的主要原因. 腐蚀曲线的测试结果表明, Co的添加可以提高合金电极在碱液中的抗腐蚀能力, 从而提高了电极的循环稳定性.     

Ti0.17Zr0.08V0.34Nb0.01Cr0.1Ni0.3氢化物电极合金微观结构及电化学性能研究

采用XRD、FESEM-EDS、ICP及EIS等方法研究了Ti_0.17Zr_0.08V_0.34Nb_0.01Cr_0.1Ni_0.3氢化物电极合金微观结构和电化学性能。X射线衍射分析表明：该合金由体心立方结构(bcc)的V基固溶体主相和少量六方结构的C14型Laves相组成；FESEM及EDS分析表明：V基固溶体主相形成树枝晶，C14型Laves相呈网格状围绕着树枝晶的晶界，元素在两相中的分布呈现镜像关系。电化学性能测试结果表明：该合金的氢化物电极在303~343 K较宽的温度区间内，表现出较高的电化学容量，在303 K和343 K时，电化学容量分别为337.0 mAh·g^-1和327.9 mAh·g^-1。在303 K循环100周后，容量为282.7 mAh·g^-1。ICP分析结果表明，氢化物电极在充放电循环过程中，V及Zr元素向KOH电解质中的溶出较为严重。EIS研究表明，金属氢化物电极表面电化学反应的电荷转移电阻(R_T)随循环次数的增加而增加，相应的交换电流密度则随循环次数的增加而降低。氢化物电极循环过程中RT的增大以及V和Zr元素的溶解，可能是导致电极容量衰减的主要原因。     

稀土元素对Ti0.26Zr0.07V0.24Mn0.1Ni0.33贮氢合金微观结构和电化学性能的影响

本文研究了稀土元素对Ti0.26Zr0.07V0.24Mn0.1Ni0.33合金的微观结构和电化学性能的影响。结果表明,Ti0.26Zr0.07V0.24-xMn0.10Ni0.33REx(RE=Ce,Nd,Gd;x=0.01)合金均有V基固溶体相和C14型Laves相两相组成。合金中两相的晶格参数随加入稀土元素的不同而发生变化。稀土元素部分取代可改善合金电极的活化性能。然而,对合金电极的其他性能影响因元素种类不同而各异。Ce取代增大了合金电极的最大放电容量,Nd元素可以有效改善合金的高倍率放电性能。工作温度对合金电极的放电容量影响较大,Nd和Gd在333 K最大放电容量可达426和465 mAh.g-1。过高的温度使其循环容量衰减加剧。     

Investigation of the influence of nickel content on the correlation between the hydrogen equilibrium pressure for hydrogen absorbing alloys and the capacity of MH electrodes in open and closed cells

Two series of overstoichiometric AB_2.4 alloys [(Zr_0.35Ti_0.65)(V_1.33Cr_0.4Fe_0.27)_{2– x} Ni_{0.4+ x} and (Zr_0.5Ti_0.5)(V_0.8Mn_0.8Cr_0.4)_{2– x} Ni_{0.4+ x} ], differing in the Zr to Ti ratios in group A and the presence of Mn or Fe in group B, were examined to consider the influence of various amounts of nickel on the structural parameters following the sorption of hydrogen. To predict the electrochemical behaviour of the prepared alloys as negative electrodes for Ni-MH cells, the pressure-composition isotherms (PCT) determined for the gas/solid phase system were correlated with the electrochemical pressure-composition (EPC) isotherms estimated from the rest potential of the alloy electrode. For preliminary assessment of the practical usefulness of the prepared samples, the electrodes made of all the alloys were subjected to charge/discharge measurements in a half-cell in 6 M KOH solution and the discharge capacities were estimated. Of the alloys with Fe and Mn components, the samples (Zr_0.35Ti_0.65)(V_0.93Cr_0.28Fe_0.19Ni_1.0) and (Zr_0.5Ti_0.5)(V_0.68Mn_0.68Cr_0.34Ni_0.7) provided the highest capacities. These alloys were chosen for testing the charge/discharge cycleability in closed Ni-MH cells. The reversibility of the cell with the former sample decreased significantly around the 25th cycle, whereas the discharge capacity of the cell with the latter sample remained almost unchanged during 100 cycles of testing. Electronic Publication     

稀土元素取代对Ti_(0.26)Zr_(0.07)V_(0.24)Mn_(0.1)Ni_(0.33)贮氢合金结构和电化学性能的影响

研究了5种稀土元素部分取代V对Ti0.26Zr0.07V0..24Mn0.1Ni0.33合金的微观结构和电化学性能的影响。结果表明,Ti0.26Zr0.07V0.24Mn0.1Ni0.33和Ti0.26Zr0.07V0.24-xMn0.1Ni0.33REx(x=0.005;RE=La,Ce,Nd,Ho,Y)均由体心立方结构的钒基固溶体相和六方结构的C14 Laves相组成。在合金中加入稀土元素,会使合金中两相的晶胞体积同时增大。稀土元素部分取代V均改善了合金电极的活化性能。La和Nd元素取代后,合金电极的最大放电容量明显增加,而Ce的取代提高了合金电极的循环稳定性。Ce,Nd,Ho,Y均改善了合金电极的倍率放电性能。合金电极在高温状态下表现出了良好的放电性能,其中Nd在333 K时放电容量可达550.4 mAh·g-1。稀土元素对荷电保持率的影响各异。     

硼的添加对Ti0.26Zr0.07V0.24Mn0.1Ni0.33贮氢合金结构和电化学性能的影响

Ti0.26Zr0.07V0.24Mn0.1Ni0.33Bx(x=0~0.10)系列合金均有V基固溶体相和C14型Laves相两相组成。添加B可提高Ti0.26Zr0.07V0.24Mn0.1Ni0.33合金的放电容量,Ti0.26Zr0.07V0.24Mn0.1Ni0.33B0.1合金电极在60 mA·g-1电流放电时的放电容量达到476.7 mAh·g-1。B的添加不同程度地降低了合金的高倍率放电性能,使合金电极表面上电化学反应的电荷转移电阻(R ct)显著增加,交换电流密度(I0)显著降低。添加B可显著改善Ti0.26Zr0.07V0.24Mn0.1Ni0.33合金电极的高温放电性能,Ti0.26Zr0.07V0.24Mn0.1Ni0.33B0.025合金电极在343 K高温下其放电容量达到525.6 mAh·g-1。     

Electrochemical characterization of negative electrodes consisting of surface-modified Zr0.9Ti0.1(Ni1.1Co0.1Mn0.5V0.2Cr0.1)x Laves-phase alloys

Laves-phase hydrogen storage alloy has a high potential for use as negative electrode material as alternative for the misch-metal-based material. In order to improve the energy density and the rate capability of negative electrode, chemical and mechanical modification of Lavesphase alloy with different stoichiometric ratios was carried out. Discharge capacity and high-rate dischargeabilty was evaluated by electrochemical methods and the characterization of Laves-phase alloy was made by X-ray diffraction, SEM observation and PCT measurement. The best result in discharge capacity could be obtained for stoichiometric Laves-phase alloy with a composition of Zr_0.9Ti_0.1Ni_1.1Co_0.1Mn_0.5V_0.2Cr_0.1 by boiling in 10 M KOH solution. On the other hand, the high-rate dischargeability was increased remarkably by introducing mechanical grinding before alkali treatment. The cause for improved performance was discussed on the basis of thermodynamic stability of metal hydride and changes in crystal structure and surface morphology influencing on diffusion coefficient and diffusion path length of hydrogen.     

Ti-Zr-V-Cr-Ni固溶体贮氢合金电极的制备和电化学性能

根据工作环境的要求,镍-金属氢化物电池不仅要满足电源在室温时的工作需要,还应满足在不同工作条件下的需求,如高温、低温等,这就需要电极在较宽的温度范围内具有优异的性能。改性的AB5合金电极在343K时的放电容量能达到265mAh·g-1左右(截止电压为0.5V,相对于Hg/HgO参比电极)[     

Hydrogen sorption and electrochemical properties of alloys: Systems Zr-Ti-Ni-V-Mn with laves phase structures

Using scanning electron microscopy and x-ray phase analysis techniques, it is shown that the C14-type Laves phase with a wide homogeneity reaching the AB_2.3 stoichiometry is the main phase in the Zr_0.5Ti_0.5Ni_yV_0.5Mn _x alloys, where y = 0.8–1.4 and x = 0.1–1.7. With the increase in the nickel and manganese contents and in the stoichiometric ratio B/A, the hydrogen capacity decreases from 2 to 1.6 wt %, the equilibrium pressure of hydride phases increases, and the hydrides become less stable. The highest discharge capacity is reached for stoichiometric ratios AB_1.7–2.3, where the maximum discharge capacity at a discharge current density of 100 mA/g is 300 (mA h)/g. Alloys that contain ferrovanadium in place of vanadium are also considered.