排序方式: 共有17条查询结果,搜索用时 15 毫秒
1.
高分子减阻剂研究进展 总被引:4,自引:0,他引:4
综述了近年来高分子减阻剂研究进展,对高分子减阻剂的两种主要合成方法进行了比较,详细阐述主催化剂、助催化剂、聚合物的相对分子质量及相对分子质量分布、聚合物的空间构型、聚合物后处理等对高分子减阻剂减阻性能的影响,对分子缔合型减阻剂也进行了概括。结合本课题组的研究,提出我国应加快减阻剂生产与应用的研究,减少对进口减阻剂的依赖。 相似文献
2.
Effects of Calcination Temperature on the Acidity and Catalytic Performances of HZSM-5 Zeolite Catalysts for the Catalytic Cracking of n-Butane 下载免费PDF全文
The acidic modulations of a series of HZSM-5 catalysts were successfully made by calcination at different treatment temperatures, i.e. 500, 600, 650, 700 and 800 ℃, respectively. The results indicated that the total acid amounts, their density and the amount of B-type acid of HZSM-5 catalysts rapidly decreased, while the amounts of L-type acid had almost no change and thus the ratio of L/B was obviously enhanced with the increase of calcination temperature (excluding 800 ℃). The catalytic performances of modified HZSM-5 catalysts for the cracking of n-butane were also investigated. The main properties of these catalysts were characterized by means of XRD, N2 adsorption at low temperature, NH3-TPD, FTIR of pyridine adsorption and BET surface area measurements. The results showed that HZSM-5 zeolite pretreated at 800 ℃ had very low catalytic activity for n-butane cracking. In the calcination temperature range of 500-700 ℃, the total selectivity to olefins, propylene and butene were increased with the increase of calcination temperature, while, the selectivity for arene decreased with the calcination temperature.The HZSM-5 zeolite calcined at 700 ℃ produced light olefins with high yield, at the reaction temperature of 650 ℃ the yields of total olefins and ethylene were 52.8% and 29.4%, respectively. Besides, the more important role is that high calcination temperature treatment improved the duration stability of HZSM-5zeolites. The effect of calcination temperature on the physico-chemical properties and catalytic performance of HZSM-5 for cracking of n-butane was explored. It was found that the calcination temperature had large effects on the surface area, crystallinity and acid properties of HZSM-5 catalyst, which further affected the catalytic performance for n-butane cracking. 相似文献
3.
4.
5.
碳四烃综合利用研究及评述 总被引:1,自引:0,他引:1
本文对石油炼制和石油加工过程产生的碳四烃进行了评述,重点阐述了正丁烷、异丁烷、正丁烯、异丁烯、丁二烯的化工利用及工艺概况.同时对丁二烯、异丁烯及1-丁烯的分离进行了阐述.并提出我国应当加大对烯烃的化工利用及烷烃转化烯烃的研究. 相似文献
6.
采用等体积浸渍法制得一系列NiMo/Al_2O_3-USY催化剂,在200 mL固定床上考察了不同金属负载量对其中低煤焦油加氢裂化催化性能的影响,进一步用NH_4F溶液改性USY以提高催化剂的脱硫性能,并结合XRD、氮气吸附-脱附、XPS、HR-TEM、H_2-TPR和NH_3-TPD等手段对催化剂进行了表征分析。结果表明,NiM o/Al_2O_3-USY催化剂适宜的M oO_3负载量为15%(质量分数);当MoO_3含量超过15%后,MoS_2活性相在载体上团聚,硫化程度趋于稳定,强酸酸量和孔径减少,增加金属负载量对煤焦油加氢裂化转化率影响较小。NH_4F改性USY可增大NiM o/Al_2O_3-USY催化剂的孔径,有利于提高煤焦油加氢裂化转化率。表面强酸酸量减少后,产品中的硫含量明显增加,说明强酸酸量是影响产物硫含量的关键因素。当NH_4F浓度为0.6 mol/L时,NH_4F改性USY制得的NM 0.6催化剂上煤焦油加氢裂化的转化率为87.65%,产品汽油馏分(≤180℃)硫含量为5.96 mg/kg,柴油馏分(180-320℃)硫含量为34.98 mg/kg。 相似文献
7.
ZSM-5分子筛在低碳烷烃脱氢中的催化应用 总被引:1,自引:0,他引:1
ZSM-5分子筛是应用广泛的催化体系,常用于烷烃的芳构化、催化裂化及异构化。近年来因其独特的孔道结构及表面酸碱特性,开始应用于低碳烷烃脱氢。本文综述了Zn/ZSM-5及Ga/ZSM-5催化剂对低碳烷烃的脱氢理论研究,概述了Fe/ZSM-5、Cr/ZSM-5、Pt/ZSM-5以及一些其他过渡金属催化剂对低碳烷烃的催化应用;探讨了ZSM-5基催化剂的影响因素如硅铝比、焙烧温度及制备方法等,以利于对低碳烷烃脱氢可作进一步了解;最后对ZSM-5催化体系进行了评述及展望。 相似文献
8.
本文综述了甲烷无氧芳构化反应及Mo基分子筛催化剂的研究进展。在众多的催化剂中以Mo基分子筛催化性能最佳。概括了催化剂中关于MoO<em>x前躯体结构和其在分子筛中落位,Mo2C物种和诱导期等;讨论了反应中涉及的中间产物、双功能机理以及催化剂失活等问题;归纳了催化剂制备过程中制备方法、焙烧温度与时间、Mo载量和分子筛硅铝比以及催化剂预处理对反应活性的影响;综述了提高催化剂催化性能和反应性能的各种方法,并对其分析,同时介绍了两种催化剂再生方法。最后,依据本实验室研究进展,对甲烷芳构化从工艺角度进行一些可行性讨论,并提出相关问题和展望。 相似文献
9.
10.
通过本体聚合在催化剂TiCl4/Al(Et)3作用下合成α烯烃减阻剂,通过红外光谱(IR)和X射线衍射(XRD)对聚合物进行结构分析,研究了合成聚合物影响因素对减阻聚合物特性粘度的影响.结果表明当粘度达到8.8 dl/g时减阻率可达到43.1%,即在一定范围内减阻率与粘度成正比.此时合成减阻剂的最优条件为3?C,主催化剂(TiCl4/MgCl2)、助催化剂(Al(Et)3)和二苯基二甲氧基硅烷(DDS)用量分别是0.085克,0.14毫升和0.04毫升. 相似文献