基础化学教学中从化学视角解释医学知识*——以“龋齿的形成与防护”为例

为解决医学院学生难以运用化学知识联系解释医学内容的问题,以医学案例“龋齿的形成与防护”作为切入点,通过医学现象去揭示其中所蕴含的化学原理,探索将基础化学教学与医学内容相结合。采用化学与医学融合教学模式能够激发起学生学习化学的兴趣,培养学生思考分析解决问题的能力,为培养新时代复合型医学人才奠定基础。     

Atomistic De-novo Inhibitor Generation-Guided Drug Repurposing for SARS-CoV-2 Spike Protein with Free-Energy Validation by Well-Tempered Metadynamics

Computational drug design is increasingly becoming important with new and unforeseen diseases like COVID-19. In this study, we present a new computational de novo drug design and repurposing method and applied it to find plausible drug candidates for the receptor binding domain (RBD) of SARS-CoV-2 (COVID-19). Our study comprises three steps: atom-by-atom generation of new molecules around a receptor, structural similarity mapping to existing approved and investigational drugs, and validation of their binding strengths to the viral spike proteins based on rigorous all-atom, explicit-water well-tempered metadynamics free energy calculations. By choosing the receptor binding domain of the viral spike protein, we showed that some of our new molecules and some of the repurposable drugs have stronger binding to RBD than hACE2. To validate our approach, we also calculated the free energy of hACE2 and RBD, and found it to be in an excellent agreement with experiments. These pool of drugs will allow strategic repurposing against COVID-19 for a particular prevailing conditions.     

Potassium Base-Promoted Diastereoselective Synthesis of 1,3-Diols from Allylic Alcohols and Aldehydes through a Tandem Allylic-Isomerization/Aldol–Tishchenko Reaction

This study reports the first base-promoted aldol–Tishchenko reactions of allylic alcohols with aldehydes initiated by allylic isomerization. The reaction enables the diastereoselective synthesis of a variety of 1,3-diols with three contiguous stereogenic centers. Unlike commonly reported systems, our method allows the use of readily available allylic alcohols as nucleophiles instead of enolizable aldehydes and ketones.     

Enhanced Electrocatalytic Activity of Methanol and Ethanol Oxidation in Alkaline Medium at Bimetallic Nanoparticles Electrochemically Decorated Fullerene-C60 Nanocomposite Electrocatalyst: An Efficient Anode Material for Alcohol Fuel Cell Applications

Direct alcohol fuel cells (DAFCs) have been recently playing a pivotal role in electrochemical energy sources and portable electronics. Research in DAFCs has proceeded to engage major attention due to their high catalytic activity, long-term stability, portability, and low cost. Herein, we present a facile surfactant-free route to anchor bimetallic Pd−W nanoparticles supported fullerene-C₆₀ catalyst (Pd-W@Fullerene-C₆₀) for high-performance electrooxidation of alcohols (methanol & ethanol) for DAFCs applications. Structural, elemental composition, and morphological analysis of the proposed catalyst were carried out using UV-Vis spectroscopy, X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM) and energy-dispersive x-ray spectroscopy (EDX). Electrochemical properties such as electrochemical activity, electrochemical active surface area (ECSA), and long-term stability of the Pd-W@Fullerene-C₆₀ catalyst for ethanol and methanol oxidation in the alkaline medium were explored by using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and chronoamperometry (CA). Results revealed that the proposed catalyst showed enlarged ECSA, tremendous electrocatalytic activity, high poison tolerance limit, good reproducibility, and enhanced long-term stability as compared to the monometallic catalyst and commercially available catalyst (Pt/C) towards ethanol and methanol oxidation reaction. This enhanced potentiality of the Pd-W@Fullerene-C₆₀ catalyst is due to the synergistic effect of W−Pd nanoparticles and excellent electron kinetic from fullerene support material. These findings strongly suggest the Pd-W@Fullerene-C₆₀ catalyst as potential anode material for the alcohol oxidation reaction.     

Gold Decorated Graphene by Laser Ablation for Efficient Electrocatalytic Oxidation of Methanol and Ethanol

A well‐known limitation in the fabrication of metal‐graphene composite has been the use of surfactants that strongly adsorb on the surface and reduce the performance of the catalyst. We demonstrate here a novel one‐pot synthesis of gold nanoparticles by laser ablation of gold strip and in‐situ decoration on graphene substrate. Not only the impregnation of nanoparticles was linker free, but also the synthesis by itself was surfactant‐free. The composite materials were well characterized morphologically and functionally using electron microscopy, X‐ray and electron diffraction, Raman spectroscopy, Zeta potential, electrochemical measurements and UV‐Visible spectroscopic techniques. This linker‐free gold‐graphene based composite has been employed for catalytic applications pertaining to electrooxidation. We have explored the use of this composite as a binder‐free electrode in electrocatalytic oxidation of methanol and ethanol in alkaline medium. Additionally, the onset potential for ethanol oxidation was found to be more negative, ?100 mV, an indication of its promising application in direct ethanol fuel cells.     

A novel electrochemiluminescence glucose biosensor based on platinum nanoflowers/graphene oxide/glucose oxidase modified glassy carbon electrode

A novel electrochemiluminescence (ECL) biosensor based on platinum nanoflowers (PtNFs)/graphene oxide (GO)/glucose oxidase (GODx) was discovered for glucose detection. PtNFs/GO was synthesized using a nontoxic, rapid, one-pot and template-free method and characterized by transmission electron microscopy (TEM) and high-resolution TEM techniques. The as-prepared PtNFs/GO with clean surface and multiporous structure was used to assemble GODx to form a glucose biosensor. Based on ECL results, the PtNFs/GO/GODx film-modified electrode displayed a high electrocatalytic activity towards the oxidation of glucose, which generated hydrogen peroxide (H₂O₂) to react with the luminol radicals thus enhanced the luminol ECL. Under the optimized conditions, two linear regions of ECL intensity to glucose concentration were valid in the range from 5 to 80 μmol/L (r?=?0.9957) and 80 to 1,000 μmol/L (r?=?0.9909) with a detection limit (S/N?=?3) of 2.8 μmol/L. In order to verify the reliability, the thus-fabricated biosensor was applied to determine the glucose concentration in glucose injection, glucose functional drink, and blood serum. The results indicated that the proposed biosensor presented good characteristics in terms of high sensitivity and good reproducibility for glucose determination, promising the applicability of this sensor in practical analysis.     

Morphological changes in the cellulose and lignin components of biomass occur at different stages during steam pretreatment

Morphological changes to the different components of lignocellulosic biomass were observed as they occurred during steam pretreatment by placing a pressure reaction cell in a neutron beam and collecting time-resolved neutron scattering data. Changes to cellulose morphology occurred mainly in the heating phase, whereas changes in lignin morphology occurred mainly in the holding and cooling phases. During the heating stage, water is irreversibly expelled from cellulose microfibrils as the elementary fibrils coalesce. During the holding phase lignin aggregates begin to appear and they increase in size most noticeably during the cooling phase. This experiment demonstrates the unique information that in situ small angle neutron scattering studies of pretreatment can provide. This approach could be useful in optimizing the heating, holding and cooling stages of pretreatments to allow the exact size and nature of lignin aggregates to be controlled in order to enhance enzyme accessibility to cellulose and therefore the efficiency of biomass conversion.     

Ordered nanostructured ceramic–metal composites through multifunctional block copolymer-metal nanoparticle self-assembly

A novel strategy for fabrication of ordered ceramic–metal nanocomposites was demonstrated by multifunctional block copolymer/metal nanoparticle self-assembly. Hybrid organic–inorganic block copolymer poly(3-methacryloxypropyl-T8-heptaisobutyl-polyhedral oligomeric silsesquioxane-block-N,N-dimethylaminoethyl methacrylate) was synthesized and used as a bi-functional structure directing agent for ligand-stabilized platinum nanoparticles to form ordered organic–inorganic nanocomposites with dense loading of inorganic species in both microphase separated domains. Subsequently, thin films of the hybrid material were converted to ordered silica (ceramic)–platinum (metal) nanocomposites via UV-assisted ozonolysis. This is the first time ordered ceramic–metal nanocomposites were achieved through a bottom-up approach, opening up opportunities for the design and synthesis of a broad range of ordered inorganic–inorganic nanocomposites.     

An Aptamer-Nanotrain Assembled from Six-Letter DNA Delivers Doxorubicin Selectively to Liver Cancer Cells

Expanding the number of nucleotides in DNA increases the information density of functional DNA molecules, creating nanoassemblies that cannot be invaded by natural DNA/RNA in complex biological systems. Here, we show how six-letter GACTZP DNA contributes this property in two parts of a nanoassembly: 1) in an aptamer evolved from a six-letter DNA library to selectively bind liver cancer cells; and 2) in a six-letter self-assembling GACTZP nanotrain that carries the drug doxorubicin. The aptamer-nanotrain assembly, charged with doxorubicin, selectively kills liver cancer cells in culture, as the selectivity of the aptamer binding directs doxorubicin into the aptamer-targeted cells. The assembly does not kill untransformed cells that the aptamer does not bind. This architecture, built with an expanded genetic alphabet, is reminiscent of antibodies conjugated to drugs, which presumably act by this mechanism as well, but with the antibody replaced by an aptamer.     

基于FeWOx/SiO2载氧体的甲烷化学链部分氧化反应

甲烷具有价格低廉且储量丰富的优点,因此将甲烷转化为合成气(一种H2:CO为2的混合物),从而进一步合成有价值的化学品和液体燃料引起了人们的极大关注.化学链甲烷部分氧化(CLPOM)技术能避免甲烷与空气直接接触而引起爆炸的危险,可以降低后续对合成气与氮气分离操作所带来的费用,因此日益受到关注.CLOPM过程主要分为两步:第一步,CH4被载氧体所携带的氧部分氧化,载氧体被还原;第二步,利用氧化剂(例如空气)将被还原的载氧体再氧化恢复.因此,载氧体在CLOPM过程中起到至关重要的作用.载氧体的选择主要存在两个问题:(1)甲烷被活化所产生含碳产物的能力与晶格氧的给氧能力不匹配所带来的严重碳沉积;(2)金属离子间扩散速率不匹配而造成载氧体在氧化还原过程中结构的不可逆变化.基于上述两个问题,本文设计了FeWOx/SiO2载氧体用于CLPOM.与未改性的WO3/SiO2载氧体相比,甲烷的转化率和合成气的收率都有显著提高.FeWOx/SiO2在900℃、1 atm反应条件下表现出62%的甲烷转化率、93%的CO气相选择性、94%的H2选择性和2.4的H2/CO比值,同时在50个循环中表现出优异的催化活性和稳定性.本工作利用CH4脉冲反应研究了FeWOx/SiO2的甲烷表面反应过程;采用CH4-TPR和H2-TPR相结合探究了甲烷活化速率与晶格氧扩散速率之间的关系;通过XPS和XRD对FeWOx/SiO2在氧化还原过程中的结构稳定性进行了探讨.综合上述实验结果,对FeWOx/SiO2应用于CLPOM的反应机理进行了阐述.H2-TPR结果表明,在FeWOx/SiO2中,相较于Fe2O3/SiO2,Fe-O的活性受到抑制,使其更倾向于与甲烷发生部分氧化反应;相较于WO3/SiO2,W-O的活性得到明显提升,因此更多的晶格氧可以参与到部分氧化反应中来氧化积碳,从而使合成气收率大幅度提升.从CH4-TPR结果可以看出,对于FeWOx/SiO2,CO与H2的生成温度最接近,意味着晶格氧的传输速率较快并且能够与甲烷活化产生含碳中间物种的速率相匹配,将其及时氧化生成CO,避免由于积碳造成的催化剂失活.结合XPS和XRD结果可以得出,在甲烷还原过程中,FeWOx经历一步还原形成Fe-W合金,由于其间存在强相互作用,因而抑制了还原过程中催化剂相分离现象的发生.同时,根据铁钨离子在空气条件下扩散速率的公式计算可以得出,其相近的离子氧化速率也保证了在氧化过程中催化剂结构的稳定性.本工作为进一步构建用于甲烷化学链部分氧化制合成气的复合金属氧化物载氧体提供了研究思路.