利用尿素热退火方法制备氮掺杂石墨

在尿素气氛中,通过热退火实验实现石墨烯的氮掺杂. 结合光电子能谱和拉曼光谱,确定了氮在石墨烯中的掺杂构型,并发现掺杂量可以通过退火温度和时间加以调控. 电性测量表明掺杂石墨烯的电导同氮掺杂量有很好的关联性.     

Two localized CO2 laser treatment methods for mitigation of UV damage growth in fused silica

Two methods：high-power,short-time,single-shot irradiation（Method A） and low-power,long-time,multi-shot irradiation（Method B） are investigated to mitigate the UV damage growth in fused silica by using a 10.6-μm CO2 laser.To verify the mitigation effect of the two methods,the laser induced damage thresholds（LIDTs） of the mitigated sites are tested with a 355-nm,6.4-ns Nd：YAG laser,and the light modulation of the mitigation sites are tested with a 351-nm continuous Nd：YLF laser.The mitigated damaged sites treated with the two methods have almost the same LIDTs,which can recover to the level of pristine material.Compared with Method A,Method B produces mitigated sites with low crater depth and weak light modulation.In addition,there is no raised rim or re-deposited debris formed around the crater edge for Method B.Theoretical calculation is utilized to evaluate the central temperature of the CO2 laser beam irradiated zone and the radius of the crater.It is indicated that the calculated results are consistent with the experimental results.     

我为高考设计题目

题83已知数列{an}为等差数列,数列{bn}为等比数列.(1)若a1+a2+a3=-12,b1·b2·b3=27,且a1+b1,a2+b2,a3+b3是各项均为正整数的等比数列的前3项,求数列{an},{bn}的通项;     

非线性光学中薛定谔型方程的整体吸引子

研究了一类非线性薛定谔型方程,描述了光波在光折射晶体中的传播.首先构造了该模型整体弱的吸引子,然后通过能量方程的精确分析,证明整体弱吸引子实际为系统整体强吸引子.最后给出了整体吸引子的分形维数和Hausdorff维数的上界估计.     

重离子辐照对人肝癌HepG2细胞蛋白质组图谱的影响

分别制备经1 Gy C离子辐照和未经辐照人肝癌HepG2细胞的总蛋白样品, 采用固相pH梯度双向凝胶电泳技术进行蛋白分离, 用ImageMaster 2D双向电泳凝胶图像分析软件分析数字化图谱。 结果显示, 差异表达的蛋白质点为17个, 其中1个仅在未经C离子辐照的HepG2细胞中表达, 8个蛋白质点在辐照后的细胞中表达上调, 8个蛋白质点在辐照后的细胞中表达下调。 建立了重复性较好和分辨率较高的分离HepG2细胞总蛋白的双向电泳技术。 实验结果表明, C离子辐照HepG2细胞后其蛋白质组发生了改变。     

大戟属三萜类结构及生物活性*

大戟属植物在全世界分布有2000多种,对于本属植物二萜类成分及生物活性的综述报道较多,但是还未见关于三萜类化学成分及生物活性的综述报道。本文综述了该属植物各种类型三萜化合物（羊毛脂烷型、环阿尔廷烷型、大戟烷型、甘遂烷型、齐敦果烷型、乌苏烷型及羽扇豆烷型等）的化学性能以及抗肿瘤、抗炎抗菌、抗病毒等主要生物活性的研究。     

A new approach to detecting weak signal in strong noise based on chaos system control

In this paper, a chaos system and proportional differential control are both used to detect the frequency of an unknown signal. In traditional methods the useful signal is obtained through the Duffing equation or other chaotic oscillators. But these methods are too complex because of using a lot of chaos oscillators. In this paper a new method is presented that uses the R?ssler equation and proportional differential control to detect a weak signal frequency. Substituting the detected signal frequency into the R?ssler equation leads the R?ssler phase state to be considerably changed. The chaos state can be controlled through the proportional differential method. Through its phase diagram and spectrum analysis, the unknown frequency is obtained. The simulation results verify that the presented method is feasible and that the detection accuracy is higher than those of other methods.     

Relationship between group velocity and symmetry of photonic crystals

Group velocity (GV) of eigenmode is a crucial parameter to explain the extraordinary phenomena about light propagation in photonic crystals (PhCs). To study relationships between group velocity and symmetry of PhCs, a new general expression of GV in PhCs made up of non-dispersive material is introduced. Based on this, the GVs of eigenmodes of PhCs, especially those of degenerate eigenmodes at highly symmetric points in the first Brillouin zone, are discussed. Some interesting results are obtained. For example, the summation of degenerate eigenmodes' GVs is invariant under the operations of wave vector ${{\bm K}}$-group $M_{{\bm K}} $. In addition, some numerical results are presented to verify them.     

高功率脉冲非平衡磁控溅射放电特性和参数研究

用线圈电流控制非平衡磁场,用汤森放电击穿形成深度自触发放电,用磁阱捕获放电形成的二次电子和导致漂移电流,形成了高功率非平衡磁控溅射放电。采用偏压为-100V相对磁控靶放置的圆形平面电极收集饱和离子电流;在距离磁控靶14cm的位置由Langmuir探针测量浮置电位;示波器测量磁控靶的脉冲电压、电流、浮置电位和饱和离子电流信号。装置的放电脉冲功率达到0.9MW,脉冲频率最大值为40Hz左右,空间电荷限制条件是控制电子电流和离子电流的主要机制。     

???????????????????????????????

通过对套铣筒这种特殊结构钻柱的分析,在现有钻柱力学模型研究的基础上,针对 套铣筒结构特点(大筒径、薄壁筒型钻柱),建立套铣筒与井壁接触力学模型,通过分析套铣 管柱在井下屈曲状态以及与井壁接触压力的计算,对套铣筒进行力学分析以及摩阻力计算.