Surface Organometallic Chemistry for Single-site Catalysis and Single-atom Catalysis

Although driven by different research interests, single-site catalysts and single-atom catalysts are both believed to be model systems bridging homogeneous and heterogeneous catalysis. The two concepts are similar but different. In this review, we will first explain the difference between single-atom catalysis and single-site catalysis, in terms of their goals, synthetic methods and coordination structures of corresponding catalysts. Then, we will introduce the surface organometallic chemistry method, a method traditionally used for synthesizing single-site catalyst. We will explain why it might benefit the single-atom catalysis community. At last, the choice of support to accommodate the method for synthesizing single-atom catalysts will be discussed.     

电感耦合等离子体原子发射光谱标准加入法测定铜精矿中锌、铅、砷、铜、铋、氧化镁

建立电感耦合等离子体原子发射光谱标准加入法测定铜精矿中Zn、Pb、As、Cu、Bi、MgO.分别对酸的加入种类和数量进行条件试验,采用盐酸–硝酸–盐酸–氢氟酸–高氯酸溶样,以标准加入法配制系列标准工作溶液,建立校正曲线,有效消除了样品基体对目标物检测结果的影响.目标物的分析谱线分别为Zn 206.2 nm,Pb 182.2 nm,As 197.2 nm,Cu 324.7 nm,Bi 190.2 nm,MgO 279.5 nm.各目标物校正曲线线性相关系数均不小于0.999,检出限为0.0002％～0.0006％,测定结果的相对标准偏差为0.62％～8.92％(n=6).按照该方法测定ZBK337、ZBK340铜精矿标准物质中Zn、Pb、As、Cu、Bi、MgO,测定值均在规定的标准值再现性限范围内.     

CDFI鉴别男性乳腺良恶性肿瘤价值及与CXCL1、Gab2、MVD的相关性探究

本研究选取18例男性乳腺恶性肿瘤患者作为研究组,纳入同期41例男性良性乳腺肿瘤及50例健康体检男性分别作为良性对照组和健康对照组,通过对比分析发现,研究组CDFI参数[搏动指数(PI)、阻力指数(RI)、血流速度(PSV)]高于良性对照组和健康对照组(P<0.05);PI、RI、PSV联合诊断男性乳腺恶性肿瘤的AUC高达0.854,具有较高应用价值;研究组患者PI、RI、PSV与CXC型趋化因子配体1(CXCL1)、GRB相关蛋白2(Gab2)、微血管密度(MVD)水平间存在正相关关系(P<0.05)。由此可见,CDFI在鉴别男性乳腺良恶性肿瘤方面具有较高应用价值,且与患者CXCL1、Gab2、MVD表达呈正相关。     

端粒酶活性检测研究进展

端粒酶活性检测方法经过近30年的不断改革与发展,取得了巨大突破。该文重点综述了近3年的端粒酶活性检测方法,其中包括化学反应发光法、电化学法、荧光分析法、比色法等,旨在更加全面地了解目前端粒酶活性检测的研究进展,为设计新的端粒酶活性检测方法和克服端粒酶活性检测方法在临床试验中的挑战提供思路。     

具有刺激响应型铜(Ι)配位聚合物的合成、结构及其荧光性质研究

以三(4-(吡啶-4-基)苯基)胺和Cu₄I₄(PPh₃)₄为原料,在水热条件下合成了一个新的Cu(Ι)配合物[Cu₂I₂(TPPA)₂]_n·4H₂O[1, TPPA=三(4-(吡啶-4-基)苯基)胺],其结构经IR、元素分析、X-射线单晶衍射表征。1属正交晶系,'P b c n'空间群,晶胞参数a=29.257(5) Å, b=12.621(2)Å, c=18.304(4) Å, α=90°, β=90°, γ=90°。固态荧光测试结果显示,在365 nm激发态下,配合物1在低温时具有多重发射峰,在CIE坐标下对其颜色做了一定的探究,可作为优良发光材料应用于LED上调节白光。      

Oxide Nanofibers as Catalysts Toward Energy Conversion and Environmental Protection

Ultrathin oxide nanofibers are widely used in an array of catalytic applications toward energy conversion and environmental protection. Remarkable progress has been made with regard to the development of engineering oxide nanofibers into unique structures to suit or enable various functions. We aim to provide a comprehensive overview of oxide nanofibers, including the structure engineering, derivates, assemblies and their applications. We begin with a brief introduction to the production of nanofibers with diversified compositions, structures and properties, followed by discussions of the wet-chemistry derivates. Afterward, we discuss the applications of catalytic oxide nanofibers, including electrocata-lysis, photocatalysis and thermal-catalysis. Then we highlight the most significant role of oxide nanofibers as catalyst support for the immobilization of metal nanoparticles. Moreover, we showcase the advanced assemblies based on oxide nanofibers, including their use as multi-functional membranes and foams. In the end, we offer perspectives on the challenges, opportunities and new directions for future development.     

A Novel Fluorescent Probe for ATP Detection Based on Synergetic Effect of Aggregation-induced Emission and Counterion Displacement

In this work,a fluorescent probe(TPEBe-I)was developed for adenosine triphosphate(ATP)detection based on the synergetic effect of aggregation-induced emission and counterion displacement.TPEBe-I gave weak emission in aqueous solution due to the heavy-atom effect of counter iodide ion.However,upon the addition of ATP,the new aggregate complex(TPEBe-ATP)was formed between the cationic unit of TPEBe-I and ATP through electrostatic interactions,which not only restricted the intramolecular motion of luminogen but also eliminated the quenching effect of iodide ion.As a result,the fluorescent light-up detection for ATP was successfully achieved.Moreover,TPEBe-I exhibited high selectivity towards ATP and showed a wide linear detection region towards the logarithm of ATP concentration(5—600μmol/L)with a detection limit of 1.0μmol/L,enabling TPEBe-I as a promising probe for ATP quantitative analysis.     

维生素C的3种分光光度法测量比较*——仪器分析设计性实验教学的探索与实践

仪器分析设计性实验是培养大学生创新能力的重要手段和途径。根据仪器分析实验课的特点,开设“维生素C的3种分光光度法测量比较”设计性实验项目,通过文献调研、原理阐述、方案制定、性能测试、SPSS数据处理分析软件应用等实验环节,培养学生的综合能力和创新能力。分别建立了每种方法的标准曲线,比较相关系数、回收率和相对标准偏差,并对3种方法进行精密度与准确度实验。实践表明,通过设计性实验的实践,学生的实践能力、创新能力、基本科学素养和综合素质得到明显提高。     

农林院校校外实验教学基地分类考评机制及考评指标改革研究——大学化学校外实践基地实证分析*

针对大学化学校外实践教学基地建设和运行过程中的基地与高校的协同管理机制,实践教学基地软硬条件建设和资源配置及实践教学与理论学习的连贯性等问题,在OBE理论指导下,探究分类考核机制,在实证中构建分层次考评模型及考评指标,并建立适合于农林高校的化学校外实践教学基地的分类考评指标体系。     

利用智能手机测定补铁药物中的铁含量*

为进一步提升图像比色法测定补铁药物中铁含量的准确性及普适性,考察了拍摄环境对结果的影响,确定了适用于图像比色分析的定量参数,比较使用不同容器来盛装溶液所获得的比色结果,在最优条件下测定了实际样品中铁的含量及加标回收率。结果显示,获得可靠数据的关键是将标准溶液、待测液以及空白溶液拍摄在同一张图片上;由溶液图像R值换算的吸光度值与浓度具有最佳的线性关系;分析以比色皿、试管、点滴板为容器获得的溶液图片,都能得到适合于定量比色分析的数据;测定的加标回收率大于95%。该方法操作简便,测定结果准确,可在各种条件下的高中化学实验室中开展。