Studies on the Adsorption and Dissociation of Methane and Carbon Dioxide on Nickel Catalysts

The adsorption and dissociation of methane and carbon dioxide for reforming on nickel catalysts were extensively investigated by TPSR, TPD, XPS and pulse reaction methods. These studies showed that the decomposition of methane results in the formation of at least three kinds of surface carbon species on supported nickel catalysts. Carbidic Cα, carbonaceous Cβ and carbidic clusters C-γ surface carbon species formed by the decomposition of methane demonstrated different surface mobility, thermal stability and reactivity. Carbidic Cα is a very active and important intermediate in carbon dioxide reforming with methane, and the carbidic clusters Cγ species might be the precursor of surface carbon deposition. The partially dehydrogenated Cβ species can react with H2 or CO2 to form CH4 or CO. On the other hand, it was proven that CO2 can be weakly adsorbed on supported nickel catalysts, and only one kind of CO2 adsorption state is formed. The interaction mechanism between the species dissociated from CH4     

Catalytic Combustion of Methane over High Copper-Loading ZSM-5 Catalysts

Two series of Cu/ZSM-5 catalysts,loading from 5 to 20 wt% CuO,were prepared by the deposition-precipitation and impregnation methods,respectively.The catalysts prepared by the impreg- nation method showed better catalytic performances than those prepared by the deposition-precipitation method and the increase of copper loading favored methane conversion.20Cu(I)/ZSM-5 had the highest activity with T_(90%)of 746 K,and for 20Cu(D)/ZSM-5,T_(90%)was as high as 804 K.The characteriza- tion of X-ray diffraction(XRD),temperature-programmed reduction(TPR),temperature-programmed desorption(TPD),and X-ray photoelectron spectroscopy(XPS)revealed that the dispersion of cop- per species could be improved by using the deposition-precipitation method instead of the impregnation method,but the fraction of surface CuO,corresponding to active sites for methane oxidation,was larger on 20Cu(I)/ZSM-5 than 20Cu(D)/ZSM-5.The results of Pyridine-Fourier transform infrared spectrum (Py-FT-IR)showed that a majority of Lewis acidity and a minority of Brφnsted acidity were present on Cu/ZSM-5 catalysts.20Cu(I)/ZSM-5 presented more Lewis acid sites.The number of Lewis acid sites changed significantly with preadsorption of oxygen.Adsorption of methane and oxygen on acid sites was observed.The properties of Cu/ZSM-5 catalysts were correlated with the activity for methane oxidation.     

Dispersion state and catalytic properties of vanadia species on the surface of V_2O_5/TiO_2 catalysts

The dispersion state and catalytic properties of anatase-supported vanadia species are studied by means of X-ray diffraction (XRD), laser Raman spectroscopy (LRS), H2 temperature-programmed reduction (TPR) and the selective oxidation of o-xylene to phthalic anhydride. The almost identical values of the experimental dispersion capacity of V2O5 on anatase and the surface vacant sites available on the preferentially exposed (001) plane of anatase suggest that the highly dispersed vanadium cations are bonded to the vacant sites on the surface of anatase as derived by the incorporation model. When the loading amount of V2O5 is far below its dispersion capacity, the dispersed vanadia species might mainly consist of isolated VOx species bridging to the surface through V-O-Ti bonds. With the increase of V2O5 loading the isolated vanadia species interact with their nearest neighbors (either isolated or polymerized vanadia) through bridging V-O-V at the expenses of V-O-Ti bonds, resulting in the increase of the ra     

Studies on the Adsorption and Dissociation of Methane and Carbon Dioxide on Nickel

The adsorption and dissociation of methane and carbon dioxide for reforming on nickel catalysts were extensively investigated by TPSR, TPD, XPS and pulse reaction methods. These studies showed that the decomposition of methane results in the formation of at least three kinds of surface carbon species on supported nickel catalysts. Carbidic Cα, carbonaceous Cβ and carbidic clusters Cγ surface carbon species formed by the decomposition of methane demonstrated different surface mobility, thermal stability and reactivity. Carbidic Cα is a very active and important intermediate in carbon dioxide reforming with methane, and the carbidic clusters Cγ species might be the precursor of surface carbon deposition. The partially dehydrogenated Cβ species can react with H2 or CO2 to form CH4 or CO. On the other hand, it was proven that CO2 can be weakly adsorbed on supported nickel catalysts, and only one kind of CO2 adsorption state is formed. The interaction mechanism between the species dissociated from CH4 and CO2 during reforming was then hypothesized.     

Effects of carrier and Mn loading on supported manganese oxide catalysts for catalytic combustion of methane

Supported manganese oxide catalysts were prepared by incipient wetness impregnation method for methane catalytic combustion, and effects of the support （Al2O3, SiO2 and TiO2） and Mn loading were investigated. These catalysts were characterized with N2 adsorption, X-ray diffraction, X-ray photoelectron spectroscopy and temperature-programmed reduction techniques. Methane conversion varied in a large range depending on supports or Mn loading. Al2O3 supported 15% Mn catalyst exhibited better activity toward methane catalytic oxidation. The manganese state and oxygen species played an important role in the catalytic performance,     

Influence of preparation methods on CuO-CeO2 catalysts in the preferential oxidation of CO in excess hydrogen

Influence of three different preparation methods, i.e. impregnation, coprecipitation, and inverse coprecipitation, on the preferential oxidation of CO in excess hydrogen （PROX） over CuO-CeO2 catalysts has been investigated and CuO-CeO2 catalysts are characterized using BET, XPS, XRD, UV Raman, and TPR techniques. The results show that the catalysts prepared by coprecipitation have smaller particle sizes, well-dispersed CuOx species, more oxygen vacancies, and are more active in the PROX than those prepared by the other methods. However. the inverse coprecipitation depresses the catalytic performance of CuO-CeO2 catalysts and causes the growth of CuO-CeO2 because of different pH value in the precipitation process.     

Fischer–Tropsch synthesis on impregnated cobalt-based catalysts:New insights into the effect of impregnation solutions and pH value

The Co-based catalysts were prepared with different cobalt acetate solutions. Effects of p H value were studied deeply on Fischer–Tropsch synthesis(FTS) through a semi-batch reactor. Among all impregnation solutions(water, butanol, amyl alcohol, acetic acid, nitric acid and ammonium nitrate), the catalyst prepared by NH_4NO_3 solution showed the highest catalytic activity due to its small particle size and high reduction degree. However, the catalyst with the smallest particle size derived from water as impregnation solution exhibited low activity as well as high methane selectivity since it was difficult to be reduced and inactive in FTS. According to FT-IR spectra results, the low intensity of absorbed CO on the catalyst prepared from water solution resulted in low FTS activity. Whereas, the high activity of catalysts prepared from NH_4NO_3 solution could be explained by the high intensity of absorbed CO on the catalysts.The cobalt species on the catalysts prepared under lower p H conditions exhibited smaller particle size distribution as well as lower CO conversion than those prepared at higher p H value.     

Partial Oxidation of Methane to Syngas Using LatticeOxygen of La_(1-x)Sr_xFeO_3 Perovskite OxideCatalysts Instead of Molecular Oxygen

Catalytic partial oxidation of methane to syngas using the lattice oxygen of La1-xSrxFeO3 perovskite oxide catalysts in place of molecular oxygen was studied. La1-xSrxFeO3 (x=0, 0.1, 0.2, 0.5) perovskite oxides were prepared by the "auto-combustion method". XRD analysis showed that all La1-xSrxFeO3 samples have a single-phase perovskite-type oxide. The redox properties of the catalysts were investigated by temperature programmed reduction with hydrogen (H2-TPR). Reducibility of the catalysts increase with the increasing of the Sr2+ content. The oxygen species of the catalysts and their reaction with CH4 were studied by the temperature programmed surface reaction (CH4-TPSR). In the absence of gas phase oxygen, there exist two kinds of oxygen species on the catalysts. One kind of the oxygen species with strong oxidative ability is produced first, which can oxidize CH4 completely to CO2 and H2O. Then, the second oxygen species with weak oxidative ability is formed, which can oxidize CH4 partially to CO and     

Catalytic methanation reaction over supported nickel-rhodium oxide for purification of simulated natural gas

In this research,new catalyst with high industrial impact is developed,which can catalyze the conversion of CO2 to methane through methanation reaction.A series of catalysts based on nickel oxide were prepared using wetness impregnation technique and ageing,followed by calcination at 400℃.Rh/Ni(30:70)/Al2O3 catalyst was revealed as the most potential catalyst based on the results of catalytic activity measurement monitored by Fourier Transform Infrared Spectroscopy(FTIR)and Gas Chromatography(GC).The results showed 90.1%CO2 conversion and 70.8% yield at 400℃.     

Effect of Reduction Temperature on Hydrofining Performance of Supported Molybdenum Phosphide Catalyst

A series of supported molybdenum phosphide catalysts were prepared by impregnation method. XRD, TG-DTG, XPS and BET were used to study the phase, compositions and surface areas of the prepared catalysts. A model reactant containing thiophene, pyridine and cyclohexene was used for the measurements of catalytic activities. The effect of reduction temperature on catalytic activities was investigated. The analysis results by XRD and BET are very different when the reduction temperature is changed from 400 to 900 ℃. MoP/γ-Al2O3 catalysts and CoMoP/γ-Al2O3 catalysts prepared at the reduction temperature of 500 ℃ are the most active ones.     

The Role of Vanadia for the Selective Oxidation of Benzyl Alcohol over Heteropolymolybdate Supported on Alumina

A series of 12-molybdophosphoric acid (MPA) supported on V2O5 dispersed γ-Al2O3 catalysts with different vanadia loadings were prepared by impregnation and characterized by N2 adsorption-desorption,X-ray diffraction,temperature-programmed reduction,in situ laser Raman spectroscopy,UV-Vis diffused reflectance spectroscopy,scanning electron microscopy,and temperature-programmed desorption of NH3 techniques.Their catalytic activities were evaluated for the vapor phase aerobic oxidation of benzyl alcohol.The catalysts exhibited high catalytic activity and the conversion of benzyl alcohol depended on the vanadia content while the catalyst with 15 wt％ V2O5 content showed optimum activity.The characterization results suggest the presence of well-dispersed V2O5 and partially disintegrated Keggin ions of MPA on the support.In situ Raman studies showed a reduced Mo(IV) species when the catalysts were calcined at high temperatures.The high oxidation activity of the catalysts is related to the synergistic effect between MPA and V2O5.     

氧化钛负载脱硝催化剂的碱中毒过程：氧化钒的保留和氧化钨的牺牲

V2O5-WO3/TiO2催化剂目前已广泛用于电厂和工业锅炉燃烧废气脱硝,但燃烧原料煤及石油中含有的杂质元素碱金属与碱土金属元素可吸附在催化剂上,不仅会减少催化剂酸性位的数量,还会与催化活性元素结合生成惰性物种,导致催化剂失活。因此,已有许多有关钒钨钛催化剂碱中毒的研究,从催化剂的氧化还原能力、酸性位损失及表面孔结构等方面进行了讨论。但这些研究大多集中在碱中毒对活性组分V2O5的影响及中毒催化剂的活性变化,很少涉及催化剂中WO3的作用,也缺乏有关不同活性元素与钾盐反应的实验证据。本文采用过量浸渍法制备了不同钒和钨含量的钒钨钛催化剂,研究了氯化钾对其氨法选择性催化还原(NH3-SCR)活性的失活效应。利用感应耦合等离子体、N2吸附、拉曼光谱、H2程序升温还原、NH3吸附红外光谱和NH3氧化活性等手段对新鲜和中毒催化剂的性质进行了表征,特别探讨了V2O5和WO3对催化剂抗碱中毒能力的贡献。
　　催化剂活性测试结果表明, V2O5含量越高,活性温度窗口越宽,而且含有WO3的三元催化剂活性高于V2O5/TiO2二元催化剂。催化剂的BET比表面积和孔结构取决于TiO2载体,随活性组分配比变化不大,说明催化剂物理结构性质并非影响活性的主要因素。原位红外光谱及H2程序升温还原测试结果表明,随V2O5含量提高,催化剂表面Br?nsted酸性位数量及氧化还原能力提高。作为反应的主要活性物种, V2O5在碱中毒处理后变成惰性的偏钒酸钾KVO3,使催化剂中Br?nsted酸性位减少,热稳定性下降,并削弱了催化剂的氧化还原能力,因此低钒含量的催化剂容易严重中毒失活。在高钒负载量(3%)时,部分V2O5在碱中毒后得以保留,从而使催化剂保持了一定的脱硝催化活性。
　　另外, WO3能给催化剂表面提供热稳定的酸性位,虽然WO3自身的氧化还原能力差,但其能改善V2O5的分散性,从而提高V2O5-WO3/TiO2催化剂的活性。除此之外, WO3在催化剂碱中毒过程中还能扮演牺牲剂,与钾反应生成钨酸钾(K2WO4),即在V2O5与钾离子结合形成KVO3的同时,部分WO3也会与钾反应形成K2WO4,可以使三元催化剂保留更多的活性V物种。因此,在所研究的催化剂中,高钒负载量的V2O5-WO3/TiO2催化剂表现出最好的抗碱中毒能力。
　　活性影响因素分析表明,对于新鲜催化剂,其表面吸附的NH3量足够多,催化剂活性与表面酸性相关度不大,脱硝效率主要取决于催化剂的氧化还原能力。但是,对于碱中毒处理后的催化剂,其表面吸附NH3的能力大大削弱,这时脱硝效率除了受催化剂氧化还原能力影响,在很大程度上也依赖于催化剂的表面酸性。     

Ni-Co双金属催化剂上沼气重整制氢机理

用传统湿式浸渍法制备了La₂O₃掺杂的商业γ-Al₂O₃负载的沼气重整催化剂Ni-Co/La₂O₃-γ-Al₂O₃, 并用程序升温加氢(TPH)、程序升温氧化(TPO)、程序升温表面反应(TPSR)、程序升温脱附(TPD)及脉冲实验对催化剂进行了表征. 结果表明, 沼气重整过程中Ni-Co/La₂O₃-γ-Al₂O₃催化剂上的表面碳物种主要来源于CH₄的裂解, CO₂的贡献很小. CH₄裂解能够产生三种活性不同的碳物种, 即C_α、C_β与C_γ. 随着反应的进行, C_α物种减小而C_β与C_γ物种增加, 且C_γ物种能够转变为惰性的石墨碳. 重整反应过程中CH₄与CO₂的活化能相互促进. 催化剂表面的O物种与C反应生成CO或与CH_x反应生成CH_xO再分解为CO与吸附态的H物种, 可能是Ni-Co/La₂O₃-γ-Al₂O₃催化剂上沼气重整的速率控制步骤.     

KOH修饰Au/Al2O3催化剂的低温CO氧化催化反应性能

采用等体积浸渍法制备了KOH-Au/Al<,2>O<,3>系列催化剂,考察了催化剂对低温CO氧化反应的初始活性和干、湿气氛下连续反应的稳定性能,并用电感耦合等离子发射光谱、红外光谱、高分辨透射电镜、紫外漫反射光谱等技术对催化剂进行了结构表征.结果表明:与母体催化剂(Au/Al<,2>O<,3>)相比,修饰催化剂(KOH...     

不同方法制备的Cu－Co低碳醇含成催化剂的比较研究Ⅱ．H_2－TPD，CO－TPD及CO／H_2TPSR的研究

本文采用Ｈ２－ＴＰＤ，ＣＯ－ＴＰＤ及ＣＯ／Ｈ２ＴＰＳＲ技术对三种方法（ＳＭＡＤ、浸渍、共沉淀）制备的Ｃｕ－Ｃｏ催化剂进行了表征，并与低碳醇合成选择性进行了关联．Ｃｕ－Ｃｏ催化剂上Ｈ２－ＴＰＤ谱中共有四个脱附峰（Ａ，Ｂ，Ｃ，Ｄ），其中Ｃ峰对应于低配位Ｃｏ中心上的活化吸附氢，其面积百分数随不同催化剂的变化规律与醇选择性的变化规律一致．与ＣＯ－ＴＰＤ谱对比，Ｃｏ及Ｃｕ－Ｃｏ催化剂上ＣＯ／Ｈ２ＴＰＳＲ谱中都出现一个新的甲烷析出峰（４７３～５７３Ｋ），归属为活化吸附氢与表面活泼碳物种之间的反应，其面积百分数随不同催化剂的变化规律与醇选择性的变化一致。基于上述结果，就ＣＯ插入中心问题进行了讨论．     

催化苯羟基化反应的高效介孔VOx/SBA-16催化剂

利用浸渍法制备了介孔SBA-16负载高分散氧化钒催化剂(VOx/SBA-16),并使用XRD,TEM,N2物理吸附和Raman光谱对其进行了表征.结果表明,制备的VOx/SBA-16催化剂保持了SBA-16立方笼状孔结构,钒物种主要高度分散在SBA-16载体孔内.钒含量为7·3%的VOx/SBA-16催化剂在催化苯羟基化反应中表现出优异的催化性能.这是由于催化剂表面形成了高分散的VO4物种和纳米结构V2O5微晶.     

CeO2对催化剂银物种及CO氧化性能的影响

采用共浸渍、不同分步浸渍的方法制备了8 wt% Ag/CeO2-SiO2催化剂,运用XRD、UV-Vis、BET等多种手段对催化剂的结构进行表征,考察了其对CO氧化的活性,并初步探讨了助剂CeO2对催化剂结构及活性物种的影响。实验结果表明,添加1 wt% CeO2的8 wt% Ag/SiO2催化剂表现出较好的低温CO催化活性,随后氢气预处理明显提高了催化剂的反应活性。XRD和UV-Vis谱图表明少量的CeO2（1 wt%）有利于金属银物种的形成,并且能够提高Ag粒子的稳定性,高温处理不易聚集。高CeO2负载量下的催化剂中银物种主要以银簇（ ）形式存在。     

固相浸渍法制备NiO/CeO2催化剂及其在CO氧化反应中的应用

采用固相浸渍法制备了一系列NiO/CeO2催化剂,并通过与常规湿浸渍法比较,考察了制备方法对催化剂和CO氧化反应性能的影响.同时结合X射线衍射(XRD),N2吸附-脱附(BET),透射电镜(TEM),氢气-程序升温还原(H2-TPR),拉曼(Raman)光谱,X射线光电子能谱(XPS)等手段对催化剂的结构和表面物种分散状态进行了表征.CO氧化活性测试结果表明,当镍负载量相同时,固相浸渍法制备的催化剂相比于湿浸渍法表现出更好的催化性能.TEM、XPS、H2-TPR结果表明,固相浸渍法更有利于加强镍铈间的相互作用和得到高分散的镍物种,从而促进镍物种的还原.Raman结果表明固相浸渍法相比于湿浸渍法能产生更多氧空位,这有利于氧气在催化剂表面的活化,使得CO氧化反应更容易进行.     

CO2和CH3OH直接合成碳酸二甲酯Cu-Ni/V2O5-SiO2催化剂

采用表面反应改性法制备了V2O5 SiO2(VSiO)表面复合物 ,用等体积浸渍法制备了VSiO担载的Cu Ni双金属催化剂 ,用IR、TPD、TPSR和微反技术研究了CO2 和CH3OH在催化剂表面上的化学吸附与反应性能.结果表明,在Cu Ni/VSiO催化剂上存在着金属位Cu Ni合金、Lewis酸位Vn 和Lewis碱位V=O三类活性中心 ;CO2 在金属位和Lewis酸位协同作用下可生成CO2卧式吸附态M -(CO) -O→Vn ,此吸附态在138℃左右可解离成M -CO和V=O ;CH3OH在Lewis酸位和Lewis碱位协同作用下可形成解离吸附态V -OCH3和V -OH ;CO2 和CH3OH在Cu Ni/VSiO催化剂表面上的反应产物主要为碳酸二甲酯(DMC)、CH2O、CO和H2O ,其生成DMC的选择性在85%以上.