微波等离子体炬原子发射光谱法测定可可粉中铅、铬和镉

建立了微波消解微波等离子体炬原子发射光谱法(MPT-AES)测定可可粉中铅、铬、镉含量的方法。对酸效应及共存离子干扰进行了详细考察。在最佳条件下,测得各元素的工作曲线相关系数均大于0.9990,铅、铬、镉的方法检出限分别为4.17μg·L-1、4.38μg·L-1、3.19μg·L-1,相对标准偏差(RSD)均小于3.85%,用MPT-AES法分析经微波消解处理的不同产地的可可粉,结果表明所测样品中重金属含量均符合国家限量标准,铅、铬、镉的加标回收率分别为95.2%~101.3%、96.4%~102.5%、95.7%~103.1%。     

电感耦合等离子体质谱法测定铅锌矿尾矿渣中铜、铅、锌和镉

采用硝酸-氢氟酸-高氯酸溶解样品,用电感耦合等离子体质谱法测定了铅锌矿尾矿渣中的铜、铅、锌和镉。以铑为内标元素,选择63 Cu,66Zn,208 Pb,114 Cd作为测量同位素。铜、铅、锌的线性范围为200μg·L-1,镉的线性范围为1.0μg·L-1,检出限(3s)分别为0.04,0.10,0.03,0.003μg·g-1。测定值的相对标准偏差(n=11)在0.39%~2.2%之间。用此方法分析标准物质,测定值与认定值相符。     

原子荧光光谱法测定新疆薰衣草中的铅、砷和汞

采用原子荧光光谱法对新疆不同产地薰衣草样品中的铅、砷和汞3种重金属元素的含量进行了测定。结果表明,测定薰衣草中的铅、砷和汞元素的线性范围分别在0.1~20μg·L-1、0.5~50μg·L-1和0.1~10μg·L-1之间,检出限分别为0.05μg·L-1、0.03μg·L-1和0.05μg·L-1,相对标准偏差(RSD)≤3.03%(n=6),各元素的加标回收率在97.0%~103.0%之间。该方法快速、简便、数据准确可靠。     

铋膜电极溶出伏安法测定食品中痕量重金属

以铋膜电极为工作电极,采用微分脉冲阳极溶出伏安法直接测定食品样品中痕量铅、镉和锌。在富集电位-1.4V,富集时间180s,铋膜质量浓度150μg·L-1的条件下,铋膜电极对铅、镉和锌的氧化溶出具有良好的电化学响应。铅(Ⅱ)、镉(Ⅱ)和锌(Ⅱ)的质量浓度在5.0~40μg·L-1的范围内与其阳极溶出峰电流呈线性关系,铅(Ⅱ)、镉(Ⅱ)和锌(Ⅱ)的检出限(3S/N)分别为0.80,0.65,0.58μg·L-1。对25μg·L-1铅(Ⅱ)、镉(Ⅱ)和锌(Ⅱ)溶液用铋膜电极连续测定15次,相对标准偏差分别为6.2%,5.1%,7.1%。方法应用于食品中痕量重金属的测定,测定结果与石墨炉原子吸收光谱法的测定值相符。     

蛋壳膜负载双硫腙吸附富集-火焰原子吸收光谱法测定饮用水中镉

在碱性条件下,负载双硫腙的蛋壳膜生物吸附材料对镉离子有良好的吸附性能。据此提出用蛋壳膜负载双硫腙吸附富集-火焰原子吸收光谱法测定饮用水中镉含量的方法。吸附pH为9,振荡时间为30min,振荡温度为30℃。镉的质量浓度在1.0~50μg·L-1范围内与其吸光度呈线性关系,检出限(3s/k)为0.12μg·L-1。在5.0,10.0μg·L-1等2个浓度水平进行加标回收试验,回收率在93.8%~103%之间。对5.0μg·L-1镉标准溶液连续测定6次,测定值的相对标准偏差为4.7%。     

微波消解样品-火焰原子吸收光谱法测定美白化妆品中铅和铜

乳液和水类美白化妆品经硝酸-过氧化氢混合液消解,粉类美白化妆品经硝酸-过氧化氢-氢氟酸混合液消解,用火焰原子吸收光谱法测定样品中铅和铜的含量。在优化的仪器工作条件下,铅和铜的质量浓度分别在9.0 mg·L-1和11.0 mg·L-1以内与其吸光度呈线性关系,检出限(3s)分别为21.8μg·L-1和16.2μg·L-1。方法用于美白化妆品中铅、铜的测定,测得回收率分别在98.0%~102.5%和96.7%~105.0%之间。     

石墨炉原子吸收光谱法测定陶瓷餐具中钡的溶出量

陶瓷餐具样品经硝酸-氢氟酸(3+1)混合溶液微波消解或乙酸(4+96)溶液萃取,采用石墨炉原子吸收光谱法测定其中钡的溶出量。选择灰化温度为1 050℃,原子化温度为2 600℃。萃取法得钡的线性范围为20.0~100μg·L-1,检出限(3S/N)为0.080μg·L-1;消解法得钡的线性范围为10.0~100μg·L-1,检出限(3S/N)为0.029μg·L-1。应用此法分析了陶瓷餐具样品,加标回收率在94.2%~98.8%之间,相对标准偏差(n=5)在2.6%~3.5%之间。     

石墨炉原子吸收光谱法测定高钙食品中镉

将高钙食品置于瓷坩埚中,加入硝酸低温加热消解并蒸至近干,残渣用硝酸(1+1)溶液溶解,并补足至25 mL。采用石墨炉原子吸收光谱法测定试液中镉的含量。以硝酸镁为基体改进剂,选择灰化温度和原子化温度分别为750℃和1 100℃。镉的质量浓度在5μg.L-1以内呈线性,方法的检出限(3s/k)为3.3μg.kg-1。方法用于高钙食品样品分析,加标回收率在90.0%~103.3%之间,相对标准偏差(n=7)在2%~3%。     

石墨炉原子吸收光谱法测定土壤中铅、镉含量

土壤样品经硝酸、氢氟酸和过氧化氢加热消解,采用石墨炉原子吸收光谱法测定其中铅和镉的含量。以磷酸铵作为基体改进剂,铅和镉的灰化温度分别为400℃,250℃,原子化温度分别为2 100℃,1 800℃。铅和镉的质量浓度分别在0.50～50.0,0.10～2.5μg.L-1范围内与其吸光度呈线性关系,检出限依次为6.5,0.4pg。应用此法分析了4个土壤标准样品,测定值与标准值相符,相对标准偏差(n=6)分别在1.5%～6.3%和2.3%～5.1%之间。铅、镉的加标回收率分别在85.4%～103.2%,91.5%～102.3%之间。     

微波消解-氢化物发生-原子荧光光谱法同时测定土壤及生物样品中铅和汞

应用氢化物发生-原子荧光光谱法测定了土壤及生物样品中铅和汞。样品用硝酸4mL及过氧化氢1mL按微波消解仪的工作参数进行消解,消解后溶液定容至25mL供测定。用30g·L-1柠檬酸溶液和硝酸(1+99)溶液的混合液作载流,根据铅(Ⅱ)离子的反应和试液对酸度的要求,选用含15g·L-1硼氢化钾,10g·L-1铁氰化钾和20g·L-1氢氧化钾的混合溶液作为还原剂。方法的检出限(3s/k)为0.512μg·L-1(铅)和0.067μg·L-1(汞)。应用此方法分析了3种实样并进行加标回收试验,测得回收率分别在91.0%~97.0%(铅)和88.0%~95.5%(汞)之间。     

Determination and study on residue and dissipation of benazolin-ethyl and quizalofop-p-ethyl in rape and soil

A QuEChERS (quick, easy, cheap, effective, rugged, and safe) method for the determination of benazolin-ethyl and quizalofop-p-ethyl in rape and soil by high-performance liquid chromatography-tandem mass spectrometry has been developed in this study. The residue and dissipation of benazolin-ethyl and quizalofop-p-ethyl in rape and soil were determined with the developed method. The half-lives of benazolin-ethyl in rape straw and soil were 3.7–5.1 days and 14.3–26.3 days, respectively. The half-lives of quizalofop-p-ethyl in rape straw and soil were 5.0-6.1 days and 0.3–9.7 days, respectively. The residue of benazolin-ethyl and quizalofop-p-ethyl in rapeseed and soil were below the detection limit (i.e., 0.5?mg?kg^?1, the maximum residue level of European Union for quizalofop-p-ethyl).     

多环芳二酐型聚酯亚胺膜的透气性能

多环芳二酐型聚酯亚胺膜的透气性能李悦生，丁孟贤，徐纪平（浙江大学高分子科学与工程研究所，杭州，３１００２７）（中国科学院长春应用化学研究所）关键词聚醚酰亚胺，聚酯酰亚胺，膜，透气性通常的聚酰亚胺加工性能较差，在芳环二酐的苯环间引入醚键等柔性基团后，其...     

微量元素与疾病诊断治疗的研究现状及展望

对国内外微量元素与疾病的关系及其诊断治疗的研究现状及研究动向进行了综述，包括：微量元素与地方病、癌肿、心血管病、糖尿病、眼病、神经系统病等。参考文献72篇。     

Ferrocene and ferrocenium modified clays and their styrene and EVA composites

In this work, ferrocene- and ferrocenium-containing salts were employed to modify montmorillonite. X-ray measurements show an increase in the interlayer spacing upon clay modification, which means that the larger and more organophilic cations were inserted into the gallery space of montmorillonite. Attempts to prepare nanocomposites of polystyrene and ethylene vinyl acetate copolymers lead to immiscible systems; the morphology of these systems was elucidated with TEM, XRD and cone calorimetry. The thermal stability of the composites is greater than that of the virgin polymer.     

Synthesis and Optical and Redox Properties of Symmetric and Asymmetric BODIPYs

Herein, we present the synthetic route and the photophysical, electrochemical as well as laser properties of novel red‐emitting boron‐dipyrromethenes (BODIPYs) bearing arylethyne moieties. Such functionality is added along the main axis of the chromophore leading to single‐ and double‐substituted derivatives. The relationship between the dye structure and the lasing properties is studied in detail with the help of the photophysical and electrochemical properties as well as quantum mechanical simulations. The asymmetric substitution of the parent dye induces inhomogeneities in the charge distribution, which leads to an overall loss of the fluorescence capacity, mainly in polar media. Such non‐radiative deactivation processes can be softened by decreasing the electron‐donor ability of the substituent or even avoided by symmetrical substitution. Thus, grafting of the arylethyne moieties at the longitudinal axis of the indacene core results in an effective strategy to develop red‐edge BODIPYs with highly efficient and photostable laser emission.     

Conformations and steric and stacking interactions of trisubstituted ureas and thioureas with alkyl and phenyl groups

The monomeric ν(N—H) vibrations of various trisubstituted ureas of the R₂UPh type and -thioureas of the R₂TUPh type have been studied. The trans—out isomerism in the former and the trans—out—cis isomerism in the latter are discussed from the point of view of steric effect. The monomeric ν(N—H) vibrations of RPhUPh and RPhTUPh are also examined. The single band appearing in the spectrum of both ureas is characteristic of the cis form; this suggests the existence of phenyl—phenyl interaction (the stacking interaction proposed by Galabov et al. [10]). Behavior of ν(N—H) vibrations at several concentrations is shown to be clearly different in the three forms (trans, out and cis). The presence of the cis form is confirmed by solvent effect experiments.     

含茂基苯并三氮唑基镧系有机配合物的合成及表征

三茂基镧系化合物和苯并三氮唑在四氢呋喃中反应,合成了7个未见文献报道的含茂基苯并三氮唑基镧系有机配合物,经元素分析、IR和MS测定,从有关数据推测了这类配合物的可能结构。     

Ti-V基储氢合金及其氢化物的物相结构与组分优化设计

Ti-V基储氢合金在室温、常压下即可表现出良好的储氢特性,且质量储氢容量明显高于传统AB₅型储氢合金,从而在氢气的精制和回收、运输和储存及热泵等方面有较早的应用。 此外,在混合气体分离、核反应堆中处理氢的同位素、镍氢电池及燃料电池负极材料等方面也得到了广泛的研究与关注。 基于目前Ti-V基储氢合金的研究现状,概述了该类合金的优势、限制性因素(包括成因)及改性手段。 此外,为了进一步理解Ti-V基合金储氢机理、构建合金组分与储氢特性之间的对应关系,本工作重点围绕Ti-V基储氢合金及其氢化物的结构、组分优化设计展开综述,并对其未来研究方向做出展望。