Synthesis of Anthracene Derivatives with Azaacene-Containing Iptycene Wings and the Utilization as a Dopant for Solution-Processed Organic Light-Emitting Diodes

Substituted acene derivatives are regarded as promising materials for organic electronic devices such as organic light-emitting diodes (OLEDs). In particular, anthracene derivatives are known to exhibit good fluorescence property, with the air stability and solubility in common organic solvents expected to give advantages for solution-processed device fabrication. In this study, a series of bistriisopropylsilyl(TIPS)ethynyl anthracene derivatives with azaacene-containing iptycene wings have been synthesized by using condensation reactions. Effects of size of azaacenes on optical properties and packing structures were investigated. UV/Vis absorption and fluorescence spectra indicate that the π-elongation of iptycene units has small effects on the overall π-system, which is also supported by electrochemical measurements. Secondly, single-crystal X-ray analysis implies that the molecules likely have interactions with the iptycene units of adjacent molecules, while the iptycene wings and TIPSethynyl groups can prevent the central anthracene unit from undesirable non-radiative energy loss. Finally, the most emissive derivative was used as a dopant for solution-processed OLEDs, showing obvious electroluminescence with a luminance of over 920 cd m⁻².     

Aromaticity Relocation in Perylene Derivatives upon Two‐Electron Oxidation To Form Anthracene and Phenanthrene

We prepared perylene dications 1 ²⁺ and 2 ²⁺ by using “capped” perylene derivatives, and for the first time, successfully obtained single crystals of a perylene dication 1 ²⁺ that enabled us to perform its structural analysis. We realized that the substituted aryl groups on perylene control the positions of positive charges, thus the remaining electronic system satisfies Clar's sextet rule toward the highest number of localized sextets. Experimental and theoretical evidence proved that Clar's aromatic π‐sextet rule could be applied even for the dicationic perylenes in a very simple way.     

Redox-Induced Modulation of Exchange Interaction in a High-Spin Ground-State Diradical/Triradical System

A triplet ground-state diradical molecule, bis(nitronyl nitroxide)-substituted diphenyldihydrophenazine ( 1 ^..), that can be converted into a one-electron oxidized species, 1 ^{… +} , in the quartet ground state has been developed. Surprisingly, these species, 1 ^.. and 1 ^{… +} , can be used under ambient conditions because they are reasonably stable under aerobic conditions, even in solution. The temperature-dependent magnetic susceptibilities reveal that 1 ^.. and 1 ^{… +} are in the triplet state, with a weak exchange interaction (J₁/k_B = +3.1 K) and quartet ground state with a strong exchange interaction (J₂/k_B = +160 K), respectively. The interconversion between the neutral and one-electron oxidized species can be realized through electrochemical reactions. Significantly different absorption bands in the near-IR region newly appeared in the electronic spectra acquired during electrochemical oxidation/reduction.     

Visible-Light-Induced Heptacene Generation under Ambient Conditions: Utilization of Single-crystal Interior as an Isolated Reaction Site

The photo-induced generation of unstable molecules generally requires stringent conditions to prevent oxidation and the concomitant decomposition of the products. The visible-light-induced conversion of two heptacene precursors to heptacene was studied. Single crystals of bis- and mono-α-diketone-type heptacene precursors ( 7-DK2 and 7-DK1 , respectively), were prepared to investigate the effect of precursor structure on reactivity. The photoirradiation of a 7-DK2 single crystal cleaved only one α-diketone group, forming an intermediate bearing a pentacene subunit, while that of a 7-DK1 single crystal gave rise to characteristic absorption peaks of heptacene and their increase in intensity with photoirradiation time, indicating the generation of heptacene without decomposition. Heptacene production was not observed when the precursors were photoirradiated in solution, implying that the single crystal interior provided isolation from the external environment, thus preventing heptacene oxidation.     

Comparison between Abel test stability and thermal decomposition behavior of nitrocellulose

Journal of Thermal Analysis and Calorimetry - Nitrocellulose (NC) is prone to spontaneous decomposition with exothermic heat release and thus is generally evaluated for stability during the storage...     

Enhanced Four-Electron Oxygen Reduction Selectivity of Clamp-Shaped Cobalt(II) Porphyrin(2.1.2.1) Complexes

The molecular structure, electrochemistry, spectroelectrochemistry and electrocatalytic oxygen reduction reaction (ORR) features of two Co^II porphyrin(2.1.2.1) complexes bearing Ph or F₅Ph groups at the two meso-positions of the macrocycle are examined. Single crystal X-ray analysis reveal a highly bent, nonplanar macrocyclic conformation of the complex resulting in clamp-shaped molecular structures. Cyclic voltammetry paired with UV/Vis spectroelectrochemistry in PhCN/0.1 M TBAP suggest that the first electron addition corresponds to a macrocyclic-centered reduction while spectral changes observed during the first oxidation are consistent with a metal-centered Co^II/Co^III process. The activity of the clamp-shaped complexes towards heterogeneous ORR in 0.1 M KOH show selectivity towards the 4e⁻ ORR pathway giving H₂O. DFT first-principle calculations on the porphyrin catalyst indicates a lower overpotential for 4e⁻ ORR as compared to the 2e⁻ pathway, consistent with experimental data.     

Tetrabenzoperipentacene: Stable Five‐Electron Donating Ability and a Discrete Triple‐Layered β‐Graphite Form in the Solid State

An oxidative ring‐closure reaction of a tetranaphthylpyrene derivative led to the synthesis of a 56 all‐carbon conjugated tetrabenzoperipentacene. In the single‐crystal X‐ray structure, three molecules make a triple‐layered cluster by π‐stacking, wherein each layer rotates by 120°, and is thus considered a petit β‐graphite. As for the optical properties, the Stokes shift is extremely small (10 cm^?1), thus indicating its remarkably rigid framework. The tetrabenzoperipentacene exhibits reversible five‐electron oxidation waves in cyclic voltammetry, and is regarded as a counterpart to the fullerene C₆₀ in terms of stable multicharge‐storage nanocarbon materials.     

Micro‐ and Nano‐Liquid Phases Coexistent with Ice as Separation and Reaction Media.

Ice has a variety of scientifically interesting features, some of which have not been reasonably interpreted despite substantial efforts by researchers. Most chemical studies of ice have focused on the elucidation of its physicochemical nature and its roles in the natural environment. Ice often contains impurities, such as salts, and in such cases, a liquid phase coexists with solid ice over a wide temperature range. This impure ice also acts as a cryoreactor, governing the circulation of chemical species of environmental importance. Reactions and phenomena occurring in this liquid phase show features different from those seen in normal bulk aqueous solutions. In the present account, we discuss the chemical characteristics of the liquid phase that develops in a frozen aqueous phase and show how novel analytical systems can be designed based on he features of the liquid phase which are predictable in some cases but unpredictable in others.     

A new <Emphasis Type="Italic">q</Emphasis>-Selberg integral,Schur functions,and Young books

Recently, Kim and Oh expressed the Selberg integral in terms of the number of Young books which are a generalization of standard Young tableaux of shifted staircase shape. In this paper the generating function for Young books according to major index statistic is considered. It is shown that this generating function can be written as a Jackson integral which gives a new q-Selberg integral. It is also shown that the new q-Selberg integral has an expression in terms of Schur functions.     

Dynamic shearing resistance of molten metal films under high pressures and extremely high shearing rates

In the present study plate-impact pressureshear experiments have been conducted to study the dynamic shearing resistance of molten metal films at shearing rates of approximately 10⁷ s⁻¹. These molten films are generated by pressure-shear impact of relatively low melt-point metals such as 7075-T6 Al alloy with high hardness and high flow-strength tool-steel plates. By employing high impact speeds and relatively smooth impacting surfaces, normal interfacial pressures ranging from 1–3 GPa and slip speeds of over 100 m/s are generated during the pressure-shear loading. The resulting friction stress (∼100 to 400 MPa) combined with the high slip speeds generate conditions conductive to interfacial temperatures approaching the fully melt temperature regime of the lower melt-point metal (7075-T6 aluminum alloy) comprising the tribo-pair. During pressure-shear loading, laser interferometry is employed to measure normal and transverse motion at the rear surface of the target plate. The normal component of the particle velocity provides the interfacial normal traction while the transverse component provides the shearing resistance of the interface as it passes through melt. In order to extract the critical interfacial parameters, such as the interfacial slip-speed and interfacial temperatures, a Lagrangian finiteelement code is developed. The computational procedure accounts for dynamic effects, heat conduction, contact with friction, and full thermo-mechanical coupling. At temperatures below melt the flyer and target materials are described as an isotropic thermally softening elastic-viscoplastic solid. For material elements with temperatures in excess of the melt point, a purely Newtonian fluid constitutive model is employed. The results of this hybrid experimental-computational study provide insights into the dynamic shearing resistance of molten metal films at high pressures and extremely high shearing rates.