Modeling Pb sorption to microporous amorphous oxides as discrete particles and coatings

Hydrous amorphous Al (HAO), Fe (HFO), and Mn (HMO) oxides are ubiquitous in the subsurface as both discrete particles and coatings and exhibit a high affinity for heavy metal contaminants. To assess risks associated with heavy metals, such as Pb, to the surrounding environment and manage remedial activities requires accurate mechanistic models with well-defined transport parameters that represent sorption processes. Experiments were conducted to evaluate Pb sorption to microporous Al, Fe, and Mn oxides, as well as to montmorillonite and HAO-coated montmorillonite. Intraparticle diffusion, a natural attenuating process, was observed to be the rate-limiting mechanism in the sorption process, where best-fit surface diffusivities ranged from 10(-18) to 10(-15) cm(2) s(-1). Specifically, diffusivities of Pb sorption to discrete aluminum oxide, aluminum oxide-coated montmorillonite, and montmorillonite indicated substrate surface characteristics influence metal mobility where diffusivity increased as affinity decreased. Furthermore, the diffusivity for aluminum oxide-coated montmorillonite was consistent with the concentrations of the individual minerals present and their associated particle size distributions. These results suggest that diffusivities for other coated systems can be predicted, and that oxide coatings and montmorillonite are effective sinks for heavy metal ions.     

酚醛树脂/蒙脱土纳米复合材料的制备及固化反应动力学研究

利用自制的有机蒙脱土 ,采用浇模固化成型法制备酚醛树脂 /六次甲基四胺 /蒙脱土纳米复合材料 ,并用XRD观察有机蒙脱土分别在热塑性和热固性酚醛树脂中复合行为 .研究发现 ,由于两种树脂的固化反应机理不同 ,热固性酚醛树脂与蒙脱土复合 ,可得插层型纳米复合材料 ;而采用热塑性酚醛树脂进行固化 ,则得到部分剥离的纳米复合材料 .通过DSC进一步研究热塑性酚醛树脂 /蒙脱土复合体系的固化反应动力学 .运用Kissinger ,Flynn Wall Ozawa ,Crane方法求出活化能和反应级数等动力学参数 .结果发现 ,加入蒙脱土使固化反应活化能下降 ,反应级数减小 ,从而有利于固化工艺的实现 ,便于纳米复合材料实际应用 .     

Application of simplified desorption method to study on sorption of neptunium(V) on montmorillonite-based mixtures

To elucidate the sorption behaviors of radionuclides in multi-mineral systems and the mutual effects of minerals on this sorption, we carried out the sorption and desorption experiments of neptunium(V) on Na-montmorillonite-based two-mineral phasic systems (montmorillonite–calcite, montmorillonite–apatite). In the montmorillonite–calcite system, the sorption on the montmorillonite moiety decreased with increasing calcite content due to interference by the calcium ions dissolved from the calcite moiety, while no accumulation of Np to the calcite was observed. Total sorption of Np on the montmorillonite–apatite system was larger than that on apatite-free Na-montmorillonite, but the sorption on the montmorillonite moiety in this system was less than that on apatite-free Na-montmorillonite. Under weakly acid and neutral pH conditions, Np accumulated on the apatite moiety in a short period. At final pH 4 or less, though the pH condition was sufficient to dissolve the apatite moiety completely, the sorption very slowly increased with time and the increased Np was unexchangeable with 1 M KCl solution. This increase of the unexchangeable sorption cannot be explained by the knowledge accumulated so far.     

Properties and structure of manganese oxide-coated clay

In the environment, heavy metals are important contaminants that sorb to and accumulate in soils and sediments. Dominant minerals in the subsurface are oxides and clay, which occur as discrete particles and heterogeneous systems; these surfaces can significantly impact the mobility and bioavailability of metals through sorption. To better understand heterogeneous systems, amorphous (hydrous manganese oxide (HMO)) and crystalline manganese oxides (birnessite and pyrolusite) were coated on montmorillonite. However, the montmorillonite substrate potentially inhibited crystallization of the pyrolusite coating, and also resulted in a poorly crystalline birnessite. Mineralogy and morphology of the coated systems suggest an amorphous structure for HMO and uniform coverage for HMO and birnessite coatings; the presence of Si and Al indicates uncoated areas along intraplanar surfaces. The coating surface charge behaved similarly to that of discrete oxides and clay where the pH(znpc) of HMO- and birnessite-coated clay were 2.8 and 3.1, respectively. Surface area of the coated systems increased while the pore size distribution decreased as compared to the external surface area and pores of montmorillonite. X-ray absorption spectroscopy (XAS) revealed the local structural environment of Mn in the HMO- and birnessite-coated clay was consistent with the pure phase oxides: for HMO-coated clay 3.1 atoms of oxygen at 1.89 +/- 0.02 A in the first shell and 2.7 atoms of manganese at 2.85 +/- 0.02 in the second shell; and, for birnessite-coated clay 6 atoms of oxygen at 1.91 +/- 0.02 A in the first shell and 6 atoms of manganese at distance 2.99 +/- 0.02 A in the second shell. Overall, the surface properties suggest that the coating behaves like that of discrete oxides, an important sink for metal contaminants.     

Nickel Sorption Mechanisms in a Pyrophyllite-Montmorillonite Mixture

Nickel sorption on pyrophyllite, montmorillonite and a 1:1 pyrophyllite-montmorillonite mixture was studied at pH 7.5 and a reaction time of 40 min. The main modes of Ni uptake under these reaction conditions are adsorption on montmorillonite and surface precipitation on pyrophyllite. For the clay mixture, where adsorption on the montmorillonite component and surface precipitation on the pyrophyllite component compete for Ni uptake, X-ray absorption fine structure spectroscopy (XAFS) was used to estimate the distribution of Ni over the mixture components. This was done by comparison to pyrophyllite-montmorillonite mixtures with known Ni distributions over the mixture components. Nickel uptake on singly reacted pyrophyllite was slightly higher than on singly reacted montmorillonite. This was consistent with the XAFS results for the clay mixture, which suggested that the pyrophyllite component sorbed slightly more Ni than the montmorillonite component. Our findings suggested that both adsorption and surface precipitation were important mechanisms in the overall Ni uptake in the clay mixture, and that neither sorption mechanism truly out-competed the other in the reaction time of 40 min employed. Therefore, both mechanisms should be considered when modeling Ni sorption in similar systems. Copyright 1999 Academic Press.     

Molecular mobility of chitosan and its interaction with montmorillonite in composite films: Dielectric spectroscopy and FTIR studies

The interaction of chitosan in the basic form with montmorillonite at different concentrations in composite films is studied with the use of dielectric spectroscopy and FTIR measurements. It is shown that the interaction of amino groups and primary hydroxyl groups of chitosan with local charges on the surfaces of montmorillonite nanoparticles is responsible for a change in the system of intramolecular and intermolecular hydrogen bonds that is typical for polysaccharides. The glass-transition temperature of chitosan in the composite systems is measured.     

Photocatalytic water treatment with different TiO2 nanoparticles and hydrophilic/hydrophobic layer silicate adsorbents

The degradation of 2-chlorophenol (2-CP) was investigated by a combination of TiO₂-based photocatalysis and adsorption. Three combined systems were compared: (i) TiO₂ was intercalated into the interlamellar space of a hydrophilic montmorillonite by means of a heterocoagulation process (TiO₂ pillared montmorillonite, TPM); (ii) TiO₂ was hydrothermally crystallized on hexadecylpyridinium chloride-treated montmorillonite (HDPM-T); (iii) hexadecylpyridinium chloride-treated montmorillonite (HDPM) was used as adsorbent and Degussa P25 TiO₂ as photocatalyst (HDPM/TiO₂).

The process of mineralization of the organic substrate was characterized by measuring the total organic carbon (TOC) and total inorganic chloride contents, while the degradation of 2-CP and the formation of intermediates were followed by HPLC. The adsorbent-photocatalyst systems were characterized by X-ray diffraction measurements. In all the investigated systems, the degradation of 2-CP was accompanied by a continuous decrease in TOC content. The most advantageous situation was found with HDPM/TiO₂, for which the highest rate of oxidation of 2-CP was observed. In this case the photocatalytically recovered adsorbent may be re-used without further regeneration. A significantly lower 2-CP degradation rate was observed when TiO₂ was fixed on layer silicates. When TPM was applied, only a rather low decrease in TOC content was observed during 10 h of irradiation, i.e. only slight mineralization of the organic pollutant occurred, which is probably due to the low crystallinity and small size of the TiO₂ particles. In the case of HDPM-T, the observed quite high reduction in TOC content shows that the hydrothermally processed TiO₂ sample may compete with the Degussa P25, but the degradation of the organic pollutant is accompanied by a continuous destruction of the adsorbent.     

Grafting of montmorillonite with different functional silanes via two different reaction systems

Silane grafted montmorillonites were synthesized by using 3-aminopropyltriethoxysilane and trimethylchlorosilane via two different grafting reaction systems: (a) ethanol-water mixture and (b) vapor of silane. The resulting products were investigated using Fourier transform infrared (FTIR), X-ray diffraction (XRD), thermogravimetric analysis (TGA). XRD patterns demonstrate that silane was intercalated into the montmorillonite gallery, as indicated by the increase of the basal spacing. The product prepared by vapor deposition has a larger basal spacing than that obtained from solution, due to the different extent of silane hydrolysis in various grafting systems. TGA curves indicate that the methyl groups penetrate into the siloxane clay are the primary reason for the decrease of the dehydroxylation temperature of the grafted products. 3-Aminopropyltriethoxysilane in the grafted montmorillonite adopts a bilayer arrangement while trimethylchlorosilane adopts a monolayer arrangement within the clay gallery.     

Copper and zinc removal from aqueous solution by mixed mineral systems II. The role of solution composition and aging

This study investigates Cu and Zn removal onto binary mixed mineral sorbents from simulated wastewater, relevant to streams impacted by acid mine drainage and effluents. Mixed suspensions of kaolinite/montmorillonite and kaolinite/goethite exhibited different sorption behavior from the single mineral components, reducing Cu and Zn removal (except Cu sorbed on montmorillonite/goethite) over the range of pH investigated. Cu and Zn removal by the electrolyzed systems showed a complex response to increased ionic strength, which increased solid concentration, leading to lower Cu and Zn sorption. Enhanced Cu sorption on the montmorillonite/goethite as age increased may be attributed to increased hydroxylation of the mineral surface resulting in the formation of new reactive sites.     

Interactions in clay/electrolyte systems

The sorption of cesium and cobalt on kaolinite and montmorillonite were followed by radiotracer method. The sorption of cesium can be described by a Freundlich isotherm. Cobalt sorption on clays equilibrated in cesium chloride solutions significantly differs for kaolinite and montmorillonite due to their differences in sites available for cation sorption and changes in solution chemistry.Heterogeneous exchange of cesium ions between clay and the surrounding electrolyte was performed in order to obtain information about clay/electrolyte systems equilibration. An interplay of different processes included in the attainment of true chemical equilibria of clay/electrolyte systems are responsible for the change of clay surface properties and total exchange capacity.     

Synthesis and characterization of low dimensional ZnS- and PbS-semiconductor particles on a montmorillonite template

Low dimensional metal sulfide particles have been prepared in the interlayers of montmorillonites via reactions of the metal ion-exchanged clay minerals in aqueous dispersions with gaseous hydrogen sulfide. The montmorillonites separated from the Wyoming (USA) and Jel?ovy Potok (Slovakia) bentonites were saturated with Pb(2+) or Zn(2+). In the final nanohybrids, the smectite mineral can be incorporated with metal sulfide pillars and/or nanoparticles. Properties of the prepared materials were investigated by various analytical techniques. The formation of metal sulfide nanoparticles in the interlayer galleries was indicated by X-ray diffraction and energy dispersive X-ray analysis. About 50% of Pb(2+) or Zn(2+) present in montmorillonite has formed metal sulfide semiconducting units. Infrared spectroscopy and thermogravimetric analysis were used for characterization of starting materials and products. Ultraviolet-visible absorption and photoluminescence spectroscopies confirmed that final composite systems acquired the optical properties of the incorporated quantum low dimensional systems exhibiting blue shift of the energy gap and higher oscillator strength excitonic peaks. Larger amounts of metal sulfide nanoparticles were formed in montmorillonite Jel?ovy Potok probably as a consequence of its higher cation exchange capacity.     

聚苯乙烯/蒙脱土熔融插层复合的研究

用熔融法制备了聚苯乙烯／蒙脱土插层复合材料，用Ｘ 射线衍射、ＤＳＣ等手段研究了复合材料的结构与性能．聚苯乙烯熔体不能插层于钠基蒙脱土中，但能插层于经有机化合物处理过的蒙脱土中．     

熔融法制备聚氧化乙烯/蒙脱土杂化材料及其结晶行为

聚氧化乙烯;熔融插入;纳米杂化;熔融法制备聚氧化乙烯/蒙脱土杂化材料及其结晶行为     

有机蒙脱土改性聚氨酯纺丝研究

无机纳米颗粒如二氧化硅、二氧化钛和有机改性层状硅酸盐添加到聚合物如塑料和橡胶基质中,可以提高复合材料的某些力学性能、使用性能和热学性能,如强度、模量、热变形温度、阻隔性能和阻燃性能等等.近年来,将无机纳米颗粒加入到纤维基质中,以期获得纳米复合纤维也成为国内关注     

Montmorillonite intercalated with polyaminoamide-epichlorohydrin: preparation, characterization, and sorption behavior

Organophilic and cationic montmorillonite is desirable for pitch control in the pulp and paper industry. In this paper, polyaminoamide-epichlorohydrin (PAE)-modified montmorillonite was prepared via either solution intercalation or melt intercalation of polyaminoamide into montmorillonite, followed by the reaction with epichlorohydrin. The modified montmorillonite samples were characterized by FTIR spectroscopy, X-ray diffraction, and thermal gravimetric analysis. The amount of PAE intercalated and the surface charge densities of cationic-modified montmorillonite were determined. It was found that melt intercalation appeared to be more effective in the inclusion of PAE than solution intercalation. However, both solution- and melt-intercalated samples with various surface charge densities exhibited strong affinity toward dispersed colloidal rosin acid.     

螯合物调控蒙脱石电动电位及其吸附铬离子性能

采用改变pH值、电解质浓度和各种金属离子插层的方法, 调整对蒙脱石胶体的ζ电位, 研究了ζ电位变化与吸附金属铬离子性能的关系, 并用螯合物调控蒙脱石的ζ电位, 探索提高吸附铬离子性能的有效方法. 研究结果表明, 蒙脱石对铬离子的吸附性与ζ电位有关, 随着ζ电位的增大, 吸附量明显增大; 螯合物改性能使蒙脱石ζ电位发生明显变化, 经邻菲罗啉螯合物改性的蒙脱石电性由负变正; 对于离子交换吸附, 蒙脱石吸附前ζ电位的绝对值必须大于吸附后ζ电位的绝对值, 并且吸附前后ζ电位差值越大, 越有利于提高对低浓度铬离子的吸附; 用邻菲罗啉与铬离子的螯合物调控蒙脱石的ζ电位, 能使对铬离子的吸附量增大1倍以上, 因此, 采用螯合物调控蒙脱石ζ电位的方法有利于提高离子交换吸附的效果.     

Mechanical properties of clay‐reinforced polyamide

Intercalated and exfoliated nanocomposites were prepared by extrusion and injection of polyamide‐6 and highly swollen or slightly swollen montmorillonite, respectively. The microstructure of the nanocomposites has been studied previously. In this article, we investigated the influence of the preferential orientation of the montmorillonite sheets on the mechanical properties of the nanocomposites. Dynamic mechanical analysis and tensile tests showed that the elastic modulus depends mainly on the filler loading. A parallel coupling could well account for the behavior of the nanocomposites. The calculated elastic and storage moduli of montmorillonite were set to 140 and 40 GPa, respectively. Compression tests were performed to study the anisotropy of the mechanical properties. The elastic modulus and flow strain were sensitive to the filler orientation. A Tandon–Weng approach was applied to consider the geometry of the filler. In all low‐deformation tests, no significant difference between intercalated and exfoliated systems was observed. Finally, the influence of the dispersion and exfoliation state of the filler on the ultimate properties of the nanocomposites (tensile tests) is discussed. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 40: 272–283, 2002     

Influence of the e-beam irradiation and photo-oxidation aging on the structure and properties of LDPE-OMMT nanocomposite films

In this paper two systems, polyethylene (LDPE) and polyethylene/commercial organo-modified montmorillonite (LDPE/OMMT) nanocomposite, were subjected to e-beam irradiation at different doses and both the molecular modifications and mechanical properties have been investigated through solubility, FT-IR, calorimetric and tensile tests. Moreover, in some of the irradiated systems photo-oxidation aging was performed and its effects were studied. The results show an enhancement with irradiation of the positive effect of the nano-filler loading, related to the increase of the mechanical properties, due to the increase of the nano-filler polymer interaction.Nevertheless calorimetric and FT-IR data indicate that the well known reduction of LDPE/OMMT nanocomposite resistance to photo-oxidation ageing, with respect to LDPE, is amplified by ionizing radiation.     

Polymer-layered silicate nanocomposites based on poly(ε-caprolactone)

Poly(ε-caprolactone) nanocomposites based on montmorillonite modified with hexadecyltrimethylammonium bromide (M-HTAB) were prepared by the in situ polymerization technique. As a result, nano-structured PCL/M-HTAB systems were obtained. It was found that the molecular weight of PCL decreased with an increase in silicate content in the system. Within the investigated range of molecular weight, crystallization behavior of poly(ε-caprolactone) was affected only by the presence of M-HTAB. A silicate loading of higher than 10 wt.% reduced both crystallinity degree and the crystallization rate of PCL. The structure of obtained intercalated nanocomposites depended on the amount of montmorillonite in the systems. The periodicity of clay layers, estimated by X-ray diffraction, was found to be high at increased silicate loading in the nanocomposite. Since PCL and SAN are miscible, an attempt was made to use PCL/M-HTAB systems as a modifier for SAN matrix. Apparently, a quantity as small as 0.66 wt.% of M-HTAB in such blends induced a clear increase in material stiffness. An increase of Young's modulus of more than 40% in comparison to neat SAN was observed at 5.65 wt.% silicate loading.     

The Dynamic Viscoelasticity of Polyethylene Based Montmorillonite Intercalated Nanocomposites

The viscoelastic behavior of melts for two systems composed of intercalated nanocomposites based on low density polyethylene and 3 wt% loading of cetyltrimethylammonium bromide modified montmorillonite was studied. The results obtained through examining the dynamic storage module G‘ and dynamic loss module G“ values of the composite revealed that the dynamic viscoelastic properties of composite strongly depended on intercalation of polymer, and exhibited dramatically change with altering intercalation conditions. Only when modified montmorillonite content was about 3 wt%, the composite showed a trend of pseudo-solidlike at lower frequencies.