拓扑结构不同金属有机聚合物的电化学聚合行为和光谱电化学性质北大核心CSCD

金属有机聚合物的拓扑结构是影响其光电性质的重要原因之一。通过吡啶配体不同位点引入的电化学活性基团乙烯基或乙炔基,在电极表面电化学聚合制备了拓扑结构不同的钌金属有机聚合物薄膜,并利用循环伏安、紫外-可见吸收光谱、红外反射光谱、扫描电子显微镜等手段对其电化学特性、光电性质、表面形貌等性质进行了表征。结果表明,电活性配合物反应活性位点的空间位阻效应影响了电化学聚合的效率,其不同拓扑结构的聚合产物具有明显的光谱电化学性质差异。     

甲醇电氧化催化剂Pt/CeO2-CNTs与PtRu/C的比较研究

为认识合成催化剂Pt/CeO2-CNTs与商用催化剂PtRu/C(E-TEK)的催化性能和结构特点, 用CO溶出法和恒电位氧化法比较了这两种催化剂对CO的电氧化活性, 运用循环伏安法和恒电位氧化法比较了这两种催化剂对甲醇的电氧化活性. CO电氧化实验结果表明, PtRu/C上CO的电氧化活性明显优于Pt/CeO2-CNTs; 甲醇电氧化实验结果却表明, Pt/CeO2-CNTs与PtRu/C上甲醇电氧化表观活性相当. 为从结构特点上解释PtRu/C上CO电氧化和甲醇电氧化活性的不一致, 对PtRu/C进行了循环伏安扫描和CO溶出实验. 结果表明, PtRu/C的甲醇电氧化电流之所以没有预期高, 一是由于Pt比表面积不够大, 同时Pt-Ru之间协同作用有待提高. 本研究结果表明, 尽管Ru对Pt上CO电氧化有显著助催化作用, 但要充分发挥其对Pt上甲醇电氧化的助催化作用, 需同时提高Pt表面积和Pt-Ru接触界面. 该结论对设计甲醇电氧化催化剂具有普适意义.     

多酸/邻菲罗啉钌LBL薄膜的制备及电化学调控荧光开关性能

通过层层静电自组装技术制备了基于电致变色多酸P_8W_(48)与发光邻菲罗啉钌Ru(phen)的杂化红光薄膜[(PEI/P_8W_(48))_m/PEI/PSS/Ru(phen)/PSS]_(15)[m=1,3,5;PEI=聚乙烯亚胺;PSS=聚(4-苯乙烯磺酸钠)].利用紫外-可见光谱对薄膜的组成及增长进行了表征;通过循环伏安法对薄膜的电化学氧化还原性质进行了考察;通过荧光光谱对薄膜的发光性质进行了研究.结果表明,薄膜在外加氧化还原电位下呈现出可逆的电致变色-荧光开关性质;在阶跃电位-0.85 V/0.85 V下循环50次,其电致变色及荧光开关性能没有明显的减弱,体现了良好的电化学稳定性.     

Au/Pt纳米柱阵列电极的制备及光电催化氧化甲醇性能

利用纳米压印、 电沉积和气相沉积方法构筑了有序均一的Au及Au/Pt纳米柱阵列电极. 通过反射光谱观测到580和660 nm附近的特征吸收谱峰, 并基于有限元电磁场(FEM)理论模拟, 确定其表面等离激元共振(SPR)性质分别对应于纳米柱柱顶的电偶极模式(584 nm)、 电四极模式(638 nm)以及表面等离激元极化子(666 nm). 制备的等离激元纳米柱电极用于甲醇光电催化氧化反应时, SPR效应能显著地增强甲醇的电催化氧化电流. 当表面负载2 nm的金属Pt时, 光电催化氧化甲醇活性最高, 光照使氧化电流增加, 同时甲醇的氧化峰电位随光强的增加逐渐负移, 证明SPR弛豫产生的热空穴参与到光电协同甲醇氧化中. 在恒电流甲醇氧化实验中, 光照使表面氧化反应时间延长6倍, 减小了CO的毒化, 证明SPR对于电极表面产生一定的清洁作用.     

可溶性聚3-[(二茂铁甲酸乙酯)三乙氧基]氧基噻吩的合成与性质表征

采用化学聚合方法合成了一种含二茂铁电活性基团的新型导电聚噻吩衍生物聚3-[(二茂铁甲酸乙酯)三乙氧基]氧基噻吩, 用1H NMR和红外光谱等方法对其结构进行了表征. 实验结果表明, 该聚合物可溶于三氯甲烷、四氢呋喃和丙酮等有机溶剂, 并且二茂铁在聚合物中依然保持良好的氧化还原活性, 对钠离子具有良好的选择性络合作用.     

碳纳米管/铜纳米结构电极材料在葡萄糖检测中的应用

利用电化学沉积法制备了碳纳米管/铜纳米结构电极材料, 采用扫描电子显微镜和电化学方法对电极表面的形貌和电化学性质进行了表征. 结果表明, 碳纳米管/铜纳米结构电极材料具有较大的电化学活性表面积、 高稳定性、 良好的导电性以及高葡萄糖电氧化活性, 有望用于葡萄糖的检测.     

苯胺链段为侧基的聚酰胺酸的合成及性质

采用三元共聚法制备了苯胺齐聚物为侧链的接枝型聚酰胺酸. 通过红外光谱、核磁共振谱及高效凝胶渗透色谱等技术对聚合物结构进行了表征. 该材料亚胺化后具有十分优异的热稳定性. 紫外-可见光谱和电化学测试结果表明, 该聚合物具有独特的光谱性质和可逆的电化学活性. 聚酰胺酸/ITO电致变色电极具有颜色变化明显, 响应速度较快, 着色效率高等优点, 是一种综合性能较好的电致变色聚合物材料.     

电活性超支化聚合物的合成与性质

通过分子设计, 利用A2+B3反应合成了一种新型电活性超支化聚合物材料. 该材料在保持聚苯胺的电活性基础上, 还具有超支化聚合物特有的低黏度(其特性黏度为0.33 dL/g)、低结晶性及良好的溶解性. 利用紫外-可见光谱对聚合物的氧化过程进行了监测. 热失重分析显示, 该材料具有较好的热稳定性, 失重10%时的温度高达517 ℃. 该材料具有较高的介电常数, 有望成为一种具有实际应用价值的高介电材料.     

基于含有活性铜的碳点电化学传感器选择性检测尿酸

采用水热法制备了含有活性铜的碳点,利用荧光光谱和紫外可见吸收光谱对其光学性质进行了表征.通过电沉积法将其修饰于玻碳电极表面, 构建了电化学生物传感器,采用循环伏安法、交流阻抗法和差分脉冲伏安法对电极的电化学行为进行了考察, 并对其电化学反应机理进行了探讨.结果表明,此传感器对尿酸具有良好的电催化效果,可有效消除抗坏血酸和多巴胺等物质的干扰.在最佳条件下,氧化峰电流与尿酸的浓度在1.00~300 μmol/L范围内呈良好的线性关系, 检出限为0.30 μmol/L(S/N=3).此传感器具有制作简单、选择性好、灵敏度高和线性范围宽等优点,有望应用于实际样品的检测.     

团聚铂纳米粒子电极在甲醇氧化中的电催化特性

用H2还原法并以Nafion作为稳定剂合成团聚的Pt纳米粒子，附载于玻碳表面制备电催化剂.透射电子显微镜（TEM）和扫描电子显微镜（SEM）表征结果指出,团聚Pt纳米粒子的平均尺寸约为400 nm.运用电化学循环伏安法(CV)和原位傅立叶变换红外反射光谱（in situ FTIRS）研究甲醇的氧化过程，发现团聚Pt纳米粒子电极具有较高的电催化活性.原位FTIRS研究结果检测到甲醇在所制备的电催化剂上氧化的中间体为线型吸附态CO物种，其红外吸收给出异常红外效应的光谱特征.     

New method of synthesis of electroactive polyamide with amine‐capped aniline pentamer in the main chain

A novel way to prepare an electroactive polyamide (alternating copolymer) is presented. Well‐defined molecular structure polyamide with amine‐capped aniline pentamer in the main chain was obtained. The copolymer has been characterized by Fourier‐transform infrared (FTIR) spectra, ¹H NMR, elemental analysis (EA), and gel permeation chromatography (GPC). Its chemical oxidation process was studied by UV–vis spectra and the electrochemical analysis was checked by cyclic voltammetry (CV). It was found that the obtained electroactive polyamide shows three redox peaks in the cyclic voltammetry, which is different from the polyaniline. Moreover, the thermal properties of the copolymer were evaluated by thermogravimetric analysis (TGA). The electrical conductivity is about 2.5 × 10^?6 S cm^?1 at room temperature. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 477–482, 2006     

Electrochemical studies for the electroactivity of amine-capped aniline trimer on the anticorrosion effect of as-prepared polyimide coatings

The electroactive polyimide consisting of various content of amine-capped aniline trimers (ATs) have been successfully synthesized and characterized by Fourier-Transformation infrared and UV-visible absorption spectroscopy. The electroactivity of as-prepared polyimides was tested by electrochemical cyclic voltammetry (CV) studies. It was noticed that the as-prepared electroactive polyimide with higher content of amine-capped ATs shows higher electroactivity (i.e., larger redox current) than that of non-electroactive polyimide, leading to enhance corrosion protection efficiency on cold-rolled steel (CRS) electrodes. This enhanced corrosion protection efficiency has been explained based on a series of electrochemical measurements such as corrosion potential, polarization resistance, corrosion current and electrochemical impedance spectroscopy (EIS) studies in 5 wt-% NaCl electrolyte. This significant enhancement of corrosion protection on CRS electrodes as compared to non-electroactive polyimide might probably be attributed to the redox catalytic property of as-prepared electroactive polyimide coatings inducing the formation of passive layer of metal oxide.     

氧化偶联聚合方法合成电活性聚芳醚酮

通过氧化偶联聚合方法成功地合成出电活性聚芳醚酮. 该反应条件温和, 操作简单, 室温下即可进行. 用红外光谱、核磁共振谱、高效凝胶渗透色谱、循环伏安、热失重、X射线衍射等技术对所合成的聚合物进行了表征, 并探讨了聚合物的性能.     

A new oxidation state of aniline pentamer observed in water‐soluble electroactive oligoaniline‐chitosan polymer

A novel water‐soluble electroactive polymer, aniline pentamer crosslinked chitosan (Pentamer‐c‐Chi), was prepared by condensation polymerization of the terminal carboxyl groups in aniline pentamer with the amino side groups in chitosan in aqueous solution. The carboxyl groups were activated by N‐hydroxysuccinimide (NHS) and N,N′‐dicyclohexylcarbodiimide (DCC). The electrochemical behavior of anilinepentamer in this kind of crosslinked polymer was studied in acidic aqueous solution by means of cyclic voltammetry (CV), UV–vis, and electron spin resonance (ESR) spectroscopy. There were three reversible redox peaks in the CV of Pentamer‐c‐Chi. A new emeraldine oxidization state in the form of radical cations was proposed, which was associated with the new absorption band at 370 nm in the UV–vis spectra. The ESR of the aqueous solution of Pentamer‐c‐Chi showed a single Lorentzian shaped signal, which suggested the existence of radical cations. The new redox state was pH dependent and appeared only at pH < 3. The stability of radical cations could be attributed to the hydrogen bonds between radical cations, water, and chitosan. Morphological structure of the Pentamer‐c‐Chi can be adjusted by varying the content of aniline pentamer. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1124–1135, 2008     

电活性可生物降解纳米复合材料PAP/op-HA/PLGA的制备及成骨活性

以苯胺五聚体与聚乳酸（PLA）的三嵌段共聚物（PAP）与表面接枝低聚乳酸的纳米羟基磷灰石（op-HA）和聚丙交酯-乙交酯（PLGA）的复合物共混,制备的电活性可降解纳米复合材料PAP/op-HA/PLGA为研究对象,采用紫外可见光谱、循环伏安扫描和标准四探针法分析其电化学特性及电导率。ESEM观察其膜表面形貌,接触角评价其亲水性。通过在材料膜表面接种兔成骨细胞进行体外培养,采用荧光染色、NIH Image J图像分析和Real-time PCR综合评价细胞在材料表面的粘附、扩展（细胞面积比）和成骨相关基因的表达水平,以此评价新型电活性纳米复合骨修复材料PAP/op-HA/PLGA的表面性质和生物活性。结果表明,PAP/op-HA/PLGA的电导率较低（~5?10?6 S/cm）但具有良好的电化学氧化还原性能,PAP含量为0.1%时材料的亲水性明显改善,成骨细胞的粘附和扩展明显增强。培养7天时骨形态蛋白- 2（BMP-2）和骨连接蛋白（Osteonectin）的基因表达水平明显提高,而对Ⅰ型胶原蛋白的基因表达没有明显影响。提示PAP/op-HA/PLGA具有良好的细胞相容性和成骨活性。     

Synthesis and characterization of electroactive copolymer with phenyl-capped aniline tetramer in the main chain by oxidative coupling polymerization

A novel electroactive alternating copolymer, with fixed conjugated length of oligoaniline (phenyl-capped aniline tetramer) in the main chain, was successfully synthesized via oxidative coupling polymerization. The structure of the copolymer was systematically studied by Fourier-transform infrared (FTIR) spectra, NMR, elemental analysis (EA), UV-vis spectra and X-ray powder diffraction (XRD). And its electrochemical behavior was studied by cyclic voltammetry (CV) measurement. It was found that the obtained copolymer bearing phenyl-capped aniline tetramer segments had a reversible electrochemical property in the cyclic voltammetry, and the copolymer was oxidized to its emeraldine oxidation state and then to the pernigraniline oxidation state, which was same as that of polyaniline. Moreover, the thermal properties of the copolymer were evaluated by thermogravimetric analysis (TGA). The electrical conductivity of the obtained copolymer was about 1.43 × 10⁻⁷ S cm⁻¹ at room temperature.     

Versatile functionalization of polyester hydrogels with electroactive aniline oligomers

Functionalizing aliphatic polyester hydrogels with an aniline oligomer is a means of achieving electrically conductive and degradable hydrogels. To lower the aniline oligomer content while maintaining a high conductivity and to overcome the acidic degradation product from polylactide reported in our previous work, a series of electroactive and degradable hydrogels based on polycaprolactone (PCL) hydrogels and carboxyl‐capped aniline pentamer (CCAP) were synthesized by a simple coupling reaction at room temperature. The reaction was carried out between the hydroxyl groups of hydroxyethylmethacrylate in a photopolymerized glycidyl methacrylate (GMA)‐functionalized PCL‐poly(ethylene glycol)‐PCL degradable network and carboxyl group of CCAP, using 1‐ethyl‐3‐(3‐dimethylaminopropyl) carbodiimide as water‐condensing agent and 4‐dimethylaminopyridine as catalyst. The electroactivity of the hydrogels was verified by cyclic voltammetry, which showed three pairs of redox peaks. The electrical conductivities and swelling ratios of these hydrogels were controlled by the CCAP content, the poly(ethylene glycol) molecular weight in the macromer, and the crosslinking density of the hydrogels. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and characterization of degradable electrically conducting copolymer of aniline pentamer and polyglycolide

A novel block copolymer of polyglycolide (PGA) and aniline pentamer that is electro-active and degradable was synthesized. The copolymer was prepared by low-temperature polycondensation between carboxyl-capped aniline pentamer and hydroxyl-capped PGA, with N,N′-dicyclohexylcarbodiimide (DCC) as dehydrating agent. The structures of monomers and the copolymer were characterized by IR, ¹H NMR. The chemical redox process of the as-prepared copolymer was studied by UV-vis spectra and cyclic voltammetry (CV). Thermal analysis and the study of degradation show that the copolymer has good thermal stability and degradability.     

Development and characterization of a new conducting carbon composite electrode

A new conducting composite flexible material prepared from cellulose acetate (CA) polymer and graphite has been developed and used for the fabrication of electrodes, which were then characterized by cyclic voltammetry and electrochemical impedance spectroscopy. Scanning electron microscopy (SEM) was used to provide information concerning the morphology of the composite electrode surface. The potential window, background currents and capacitance were evaluated by cyclic voltammetry in the pH range from 4.6 to 8.2. The voltammetry of model electroactive species demonstrates a close to reversible electrochemical behaviour, under linear diffusion control. The electroactive area of the composite electrodes increases after appropriate electrode polishing and electrochemical pre-treatment. The electrodes were used as substrate for the electropolymerisation of the phenazine dye neutral red, for future use as redox mediator in electrochemical biosensors. The composite electrodes were also successfully used for the amperometric detection of ascorbate at 0.0 V vs. SCE, and applied to the measurement of ascorbate in Vitamin C tablets; the sensor exhibits high sensitivity and a low detection limit of 7.7 μM. Perspectives for use as a versatile, mechanically flexible and robust composite electrode of easily adaptable dimensions are indicated.     

Self-assembled monolayers of a hydroquinone-terminated alkanethiol onto gold surface. Interfacial electrochemistry and Michael-addition reaction with glutathione

An electroactive self-assembled monolayer (SAM) was fabricated by covalent attachment of a novel hydroquinone-terminated dodecanethiol onto the gold surface and its electrochemical behavior was investigated using cyclic voltammetry and electrochemical impedance spectroscopy. The capability of the designed SAM in immobilization of organic molecules onto the gold surface was studied utilizing the Michael-addition as a model reaction. The results obtained from cyclic voltammetry, electrochemical impedance and grazing incidence Fourier transform infrared (GI-FTIR) spectroscopy revealed that, upon applying an anodic potential to the Au-SAM electrode system in the presence of glutathione, the electrochemically generated p-quinone participated in a Michael-addition reaction with glutathione and the corresponding Michael adduct was formed at the solid–liquid interface. The kinetic parameters were then derived for this interfacial Michael-addition reaction.