β-双取代和β，β＇-取代可溶性导电聚噻吩的合成与表征

自上世纪90年代，Burroughes等人首次报道导电聚合物材料PPV（poly-p-phenylene vinylene）的发光性能后，聚合物发光研究获得了迅猛的发展。聚噻吩类聚合物因具有良好的稳定性和较高的发光活性而受到了人们广泛的关注。由于取代基的不同，聚噻吩类衍生物的发光颜色和发光强度均不相同，因此合成新型材料始终是这一领域的热点和基础工作。Yoshino等人以无水FeCl3为催化剂合成可溶性取代聚噻吩的方法，因条件温和，反应易控制，产率较高而被学术界广泛采用。我们参考并改进该方法成功地合成了β-取代聚噻吩的基础上，进一步合成了β，β’-双取代聚噻吩，以期在改变聚合物链性能的同时，调控并改善聚合物光、电性能。本文介绍了其中四种材料的合成方法、表征结果及光学性能的初步研究结果。     

聚噻吩及其衍生物在生物医学领域的应用

做为导电聚合物(CPs)中的重要一类,聚噻吩及其衍生物在电学和光学上显示出了同金属和无机半导体相似的性质.同时也显示出了不同于一般聚合物的特殊性质,如合成和处理容易等.本综述概述了近二十年来聚噻吩及其衍生物的研究进展,包括聚噻吩及其衍生物的合成、性质,以及其在生物医学领域,包括在神经探针和生物传感器中的应用.其中,对聚噻吩在神经探针方面的应用做了重点阐述.本文还对今后聚噻吩及其衍生物在生物医学领域的研究提出了一些具有挑战性的问题.     

烷基和烷氧基取代聚噻吩的合成、表征与光电性能

Fe(Ⅲ )氧化催化法合成了 4种聚噻吩衍生物 ,3 十二烷基聚噻吩 (Pat12 ) ,3 辛氧基聚噻吩 (Paot8) ,3,4 二 (十二烷基 )聚噻吩 (Pat12 12 )和 3 (十二烷基 )噻吩 3 (辛氧基 )噻吩共聚物 (CoPt12 o8) .发现这些衍生物易溶于多种常用有机溶剂 .用GPC法测定了各聚合物分子量 ,用1 H NMR法表征了各聚合物化学结构 .对比研究了这些聚合物紫外 可见吸收性能 ,光致发光性能和能隙 .对其电致发光性能进行测定的结果 ,得到了Pat12 ,Pat12 12和Paot8的电致发光光谱 .发射峰分别为 6 70nm ,5 6 0nm和 6 4 0nm .发光颜色分别为红色 ,黄色和红橙色 .聚合物的光电性能与主链电子结构有密切关系 .探讨了取代基种类和数量对聚合物能带结构 ,光电性能的影响 .     

高性能聚合物光伏材料的设计与应用

高性能聚合物光伏材料对于推动聚合物太阳能电池领域的发展具有十分重要的作用.随着研究的深入,聚合物光伏材料从早期的聚噻吩体系逐步发展到具有推拉电子作用的给体-受体(D-A)交替共聚物,其相应的器件光伏效率也从最初的1%左右提升到如今超过11%.近十年来,种类繁多的给受体单元被开发并应用于聚合物材料的构建中,其中基于苯并二噻吩(BDT)单元的聚合物材料因为具有良好的光伏性能,得到了十分广泛的应用.近年来,非富勒烯受体的迅速发展给聚合物太阳能电池的研究注入了新的活力,BDT类聚合物在基于非富勒烯受体的聚合物太阳能电池中也展现出重要的作用,已经获得了超过11%的光电转化效率.本文简要介绍了我们在高性能聚合物光伏材料的设计与应用中的相关工作,主要分为聚噻吩和苯并二噻吩材料的设计与应用、活性层形貌调控以及非富勒烯聚合物太阳能电池的相关研究.     

窄能隙共轭聚合物:聚[(3-烷基)噻吩-2,5]-取代苯甲烯衍生物的合成与表征

合成了3-丁基噻吩和3-辛基噻吩,并分别与对硝基苯甲醛和对二甲氨基苯甲醛进行聚合反应得到了具有极低能隙的聚(3-丁基噻吩)对硝基苯甲烯(PBTNBQ)、聚(3-丁基噻吩)对二甲氨基苯甲烯(PBTDMABQ)和聚(3-辛基噻吩)对二甲氨基苯甲烯(POTDMABQ).采用红外光谱、核磁共振氢谱和紫外-可见吸收光谱确认了产物的结构,发现中间产物聚(3-烷基)噻吩取代苯甲烷衍生物中存在部分醌化产物.根据E_g与入射光子能量hν的关系,采用2种模型计算了3种聚合物薄膜的光学禁带宽度为PBTNBQ1.63,1.84eV;PBTDMABQ1.44,1.75eV和POTDMABQ1.32,1.69eV,属窄能隙共轭聚合物.     

聚二茂铁基硅烷二嵌段共聚物的制备、组装及应用研究

二茂铁分子由于含有独特的芳香结构和过渡金属元素铁,具有特殊的光、电、磁特性,一直以来是科学研究和技术应用的热点之一,在功能高分子材料的制备方面具有广泛的应用前景。聚二茂铁硅烷嵌段共聚物是一类新型的主链含有二茂铁和有机硅单元的聚合物,以其可控的分子量和丰富的自组装形貌,不断得到科研人员的关注。本文主要从聚合、自组装和应用三个方面系统介绍了聚二茂铁硅烷二嵌段共聚物。其中重点介绍了应用广泛的活性阴离子聚合和进一步发展起来的阴离子两步法聚合,解释了活性聚合机理,归纳了目前成功合成的不同种类的二嵌段共聚物;论述了在选择性溶剂中,聚二茂铁硅烷二嵌段共聚物可以自组装形成柱状、管状、球状等常规胶束和片层、刷形等复杂胶束,胶束的形成同聚合一样具有活性特征,并且在一定的刺激条件下,不同类型的胶束可完成相互转变过程,另外可以对胶束局部进行功能化以赋予其特殊的性能;最后介绍了聚二茂铁硅烷二嵌段共聚物在药物缓释、纳米材料、特种催化方面的具体实例,并对其应用前景加以展望。     

含二茂铁基聚合物的合成及应用研究进展

二茂铁基聚合物由于具有独特的结构特点,使其在电化学、催化、材料等方面受到了广泛的关注。二茂铁聚合物的种类较多且合成方法多种多样。本文综述了近年来含二茂铁基聚合物的合成及应用。从缩聚、开环聚合和接枝共聚等方面介绍了近年来二茂铁基聚合物的合成方法,讨论了二茂铁基聚合物在电化学、生物材料及其他方面的应用。最后,对二茂铁基聚合物研究和应用中存在的问题及其前景进行了展望。     

酸掺杂聚二茂铁-茴香醛的合成与表征

二茂铁聚合物是一类极具发展和应用前途的金属有机聚合物,它经过缩聚、共聚和改性后可得到具有特殊的电、磁等性能的功能高分子材料。聚二茂铁-茴香醛是一种重要的二茂铁缩聚物,其结构如图1所示：     

聚乙烯醇调控水溶性共轭聚噻吩的光学性质

针对发光共轭聚合物稀溶液在干燥形成固体时的荧光淬灭问题, 通过高分子聚乙烯醇(PVA)的氢键网络调控水溶性共轭聚噻吩在溶液中的聚集行为和构象, 并采用不同的干燥方式实现了调控其固体光学性质的目的. 紫外-可见光吸收、荧光发射光谱测试表明, 在水溶液中PVA可以分散共轭聚合物链, 并增强其共平面性; 高温干燥后, 聚噻吩薄膜与无PVA添加的聚噻吩溶液的荧光性质相似; 而采用冷冻干燥法, 薄膜则保留了添加PVA后混合溶液的发光特性. 该结果表明, PVA对聚噻吩在溶液状态下的聚集/分子构象的调控行为随干燥方式的不同得到了不同程度的保留——高温加热干燥仅维持了PVA对聚噻吩的分散作用; 而冷冻干燥则完整保留了PVA与聚噻吩的分子间相互作用, 将溶液中分子的分散状态和构象同时固定. 本研究从干燥方式的角度为固态共轭聚合物聚集行为及发光性质的调控提供了新的策略.     

3-辛基噻吩的质谱分析

共轭聚合物通常具有一些独特的物理性质,如高的电导率、电致发光、电致变色、非线性光学性质等。这类共轭聚合物包括聚苯胺、聚噻吩、聚吡咯、聚对苯乙炔、聚对苯等。自英国剑桥大学的Burrougs等人[1]采用聚对苯乙炔成功地制备了第一个聚合物电致发光器件以来,对聚合物电致发光     

含芴共轭单元的超支化聚合物的合成及表征

以芴和季戊四醇为初始物,分别合成了具有芴共轭单元和季戊四醇多臂结构的两种聚合单体,进一步采用Suzuki反应合成出一种结构新颖的部分共轭结构的超支化聚合物.利用紫外吸收光谱和荧光发射光谱对聚合物予以表征,结果表明,超支化聚合物具有与模型化合物分子相似的发光行为,既可以发出纯正的蓝光,又表现出支化结构对荧光发射的影响.差...     

Arsole‐Containing π‐Conjugated Polymer by the Post‐Element‐Transformation Technique

A synthetic method to obtain an arsole‐containing π‐conjugated polymer by the post‐transformation of the organotitanium polymer titanacyclopentadiene‐2,5‐diyl unit with an arsenic‐containing building block is described. The UV/Vis absorption maximum and onset of the polymer were observed at 517 nm and 612 nm, respectively. The polymer exhibits orange photoluminescence with an emission maximum (E_max) of 600 nm and the quantum yield (Φ) of 0.05. The polymer proved to exhibit a quasi‐reversible redox behavior in its cyclic voltammetric (CV) analysis. The energy levels of the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) were estimated to be ?5.43 and ?3.24 eV, respectively, from the onsets for oxidation and reduction signals in the CV analysis. Further chemical modification of the arsole unit in the π‐conjugated polymer by complexation of gold(I) chloride occurred smoothly resulting in the bathochromic shift of the UV/Vis absorption and lowering of the LUMO energy level.     

Optical properties of a novel fluorene‐based thermally stable conjugated polymer containing pyridine and unsymmetric carbazole groups

A new diiodo monomer containing heterocyclic pyridine and carbazole groups was synthesized via Chichibabin reaction and used in the preparation of a conjugated polymer via Suzuki coupling approach. The conjugated polymer was highly soluble in common organic solvents such as NMP, THF, dichloromethane, chloroform, toluene, xylene, and benzene at room temperature. The polymer had high glass transition temperature at 191 °C and T_d10 at 434 °C in nitrogen atmosphere. The pristine polymer exhibited the UV–vis maximum absorption at 355 nm and shifted to 420 nm after protonation. The emission of the polymer in THF solution changed from the blue region with maximum peak at 400 nm to the yellow region with maximum peak at 540 nm after protonated by HCl, and the intensity of emission depended on the concentration of acid. The polymer also showed electrochromic behavior under applied voltage. The emission color of the polymer film changed from blue (435 nm) to yellow (570 nm) when 2.5 V bias voltage was applied. The polymer also exhibited write‐once and read‐many‐times (WORM) polymer memory effect with tristable states. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 991–1002, 2009     

含氟聚醚醚酮酮的制备及其性能

以邻氟对苯二酚和4,4′-二氟三苯二甲酮为原料通过亲核缩聚反应,合成含氟聚醚醚酮酮(FPEEKK)材料。 用FTIR、1H NMR和WAXD进行了结构表征,用DSC、TGA测试了热性能,并研究了聚合物的溶解性、吸水性、介电性能及光学性能。 结果表明,含氟聚醚醚酮酮具有较好的热性能（N2气气氛中,5%热分解温度为505 ℃）;能溶于氯仿、四氢呋喃和N,N-二甲基甲酰胺等有机溶剂;具有较低的吸水率(0.24%)和介电常数（ε=3.0）;在近红外区1300和1550 nm处吸收非常弱。     

Synthesis of an electroluminescent polymer and its non‐doped light‐emitting diodes with stable green emission

An electroluminescent polymer was synthesized by Wittig condensation and characterized by the measurements of ¹H‐NMR, IR, gel permeation chromatography (GPC), UV–Vis, PL, and cyclic voltammetry (CV). The polymer can be dissolved in common organic solvents such as tetrahydrofuran (THF), chloroform, and dichloromethane. The electroluminescent investigation showed that the non‐doped devices with a double‐layer configuration (ITO/PEDOT:PSS/Polymer/Mg:Ag) have a stable green emission property. The maximum luminance of the annealed device reaches 2317 cd/m². The emission maximum and the CIE 1931 coordinate values are respectively stabilized at 552 nm and near (x, y) = (0.43, 0.55) with different voltages. Copyright © 2008 John Wiley & Sons, Ltd.     

Hyperbranched copolymer containing triphenylamine and divinyl bipyridyl units for fluorescent chemosensors

A fluorescent hyperbranched copolymer (HTP) and a linear copolymer (PTP) as a reference sample to HTP both containing triphenylamine and divinyl bipyridyl units were synthesized via Heck coupling reaction from 5,5′‐Divinyl‐2,2′‐bipyridyl with tris(4‐bromophenyl)amine and with 4,4′‐dibromotriphenylamie, respectively. The chemical structure of HTP was confirmed by FTIR, ¹H NMR, and ¹³C NMR. The polymer HTP had a number‐average molecular weight of 1895 and a weight‐average molecular weight of 2315, and good solubility in conventional organic solvents, such as THF, DMF, and chloroform, and exhibited good thermal stability. The UV–vis absorption and photoluminescence (PL) spectra exhibited absorption maximum at 428 nm and emissive maximum at 531 nm for the HTP solution. The spectroscopic results of HTP and PTP indicated that hyperbranched conjugated structure increases the effective conjugation length, as compared with corresponding linear conjugated structure. The fluorescence of the polymer in solution can be quenched by various transition metal ions. The effect of backbone structure of the conjugated polymer‐based chemosensors on the sensitivity and selectivity in metal ions sensing have been investigated, and the quenching effect of HTP is more sensitive toward transition metal than linear copolymer PTP. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 222–230, 2009     

Effect of Ultrasonication on Optical Properties and Electronic States of Conjugated Polymer MEH-PPV

Poly[2-methoxy-5-（2＇-ethyl-hexyloxy）-1,4-phenylene vinylene]（MEH-PPV）solutions with different concen-trations were prepared in chloroform for different ultrasonication times.The ultraviolet absorption and photoluminescence（PL）spectra of the MEH-PPV solutions were measured,and the electronic states of the polymer chains under different experimental conditions were studied.The results showed that the effects of ultrasonication on the dilute and concentrated solutions were different.After ultrasonication,the intensity of the absorption peak at 280 nm significantly decreased,relative to the absorption peak at 500 nm for both dilute and concentrated solutions,indicating that the proportion of the two excited states in the polymer chains had changed.For dilute MEH-PPV solutions,the blue-shifted absorption（at about 500 nm）and PL spectra show that ultrasonication also led to polymer chain degradation and thus shortened the effective conjugation length.For concentrated solutions,however,the peak positions of the absorption spectra remained unchanged.In addition,the effects of the solution temperatures on the optical spectra for the MEH-PPV solutions were also discussed.     

Electrochemical synthesis and investigation of poly(1,4-bis(2-(3,4-ethylenedioxy)thienyl)benzene) and its application in an electrochromic device

1,4-Bis(2-(3,4-ethylenedioxy)thienyl)benzene, prepared by Stille cross-coupling reaction was successfully electrochemically polymerized to give polymer 1,4-bis(2-(3,4-ethylenedioxy)thienyl)benzene (PEBE). Characterizations of the resulting polymer PEBE were performed by cyclic voltammetry (CV), UV–vis, Fourier transform infrared spectroscopy and scanning electron microscopy. Moreover, the spectroelectrochemical and electrochromic properties of the polymer film were investigated. The resulting polymer film has distinct electrochromic properties and shows three different colors (deep red, gray, and light blue) under various potentials. At the dedoped state of the polymer, the π–π* transition absorption peak is located at 510?nm and the optical band gap (E _g) was calculated as 1.92?eV. The PEBE film shows a maximum optical contrast (ΔT%) of 31.0?% at 500?nm with a response time of 0.85?s. The coloration efficiency of PEBE film was calculated to be 182.2?cm²C^?1. An electrochromic device (ECD) based on PEBE and poly(3,4-ethylenedioxythiophene) was also constructed and characterized. The response time was measured as 0.4?s, and the coloration efficiency of the device was calculated to be 225.4?cm²C^?1. Furthermore, this ECD exhibited satisfactory optical memories and redox stability.     

芴基Cardo型聚亚胺酮的分子结构拟、合成及性能

以9,9-双-(3-R-4-氨基苯基)芴(R=H,CH3,F)和1,4-双-(4′-溴苯酰基)苯为单体,通过BuchwaldHartwig交叉偶联反应,缩聚合成了芴基Cardo型聚亚胺酮(PIKF).利用MS软件对其分子结构进行模拟,并通过1H NMR和FTIR等方法进行表征,结果与目标产物吻合.利用凝胶渗透色谱(GP...