便携式微波等离子体离子化检测器气相色谱仪用于气体分析的研究

本文使用自制的便携式微波诱导等离子体离子化检测器气相色谱仪对可燃气体中N_2、O_2、H_2和CH_4的测定方法进行了研究。以氩气为载气和工作气体,考察了改进后的微波诱导等离子体离子化检洲器(MIPID)的工作参数对测定的影响。对煤气和乙炔中的O_2、N_2、H_2和CH_4进行了测定,分析结果与热导池检测器(TCD)的气相色谱法一致。讨论了高电离电位(>11.7ev)气体组分在MIPID中响应特性。     

微波诱导等离子体离子化检测器响应特性的研究

微波诱导等离子体可在低功率和低工作气体流速下稳定地工作,已成功地应用于气相色谱检测器~[1～3].本文在文献~[4,5]工作的基础上,对MIPID的工作参数及其响应特性进行了研究,并初步探讨了样品的离子化机理.     

微波诱导等离子体离子化检测器的研究——气相色谱法同时测定甲醇和水

本文采用带自制的微波诱导等离子体离子化检测(GC-MIPID)的气相色谱,以氩气为载气和工作气体,对甲醇和水的同时测定进行了详细研究。方法灵敏度优于氢火焰离子化检测器和热导池检测器,并且解决了用单一检测器难以同时测定甲醇和水的问题。方法已用于乙醇中甲醇和水的测定。文中还对MIPID的离子化机理作了初步的探讨。     

新型色谱用微波等离子体离子化检测器的研究

自1965年McCormark提出微波等离子体应用于气相色谱法以来,人们相继研制出多种类型色谱用微波等离子体检测器,并在环保、医药、卫生等部门得到应用。在近几年研究工作的基础上,本文提出了我们新近研制的一种色谱用微波等离子体离子化检测器(MPID),并对检测器的一些分析特性进行了考察。 MPID的结构和工作原理 微波等离子体离子化检测器是我们自己设计和加工组装的,结构示意图见图1。     

直流等离子体离子化检测器的研究：管道煤气中可燃气体的测定

本文提出一种改进的直流等离子体离子化检测器（ＤＣＰＩＤ），用于管道煤气中可燃气体Ｈ２、ＣＨ４和ＣＯ的测定。采用氢气作工作气体，对该检测器的工作参数和响应特性进行了优化。本法结果与微波诱导等离子体离子化检测器（ＭＩＰＩＤ）的结果作了比较，结果满意。     

气相色谱用氦等离子体离子化检测器研究进展

本文对用于气相色谱的直流放电等离子体、微波等离子体和脉冲放电等离子体等三种等离子体离子化检测器进行了评述。对气相色谱用等离子体离子化检测器的发展前景进行了展望。     

气相色谱-微波等离子体炬双检测器及其气相色谱的响应特性

提出并建立了气相色谱-微波等离子体炬(MPT)原子发射光谱和离子化双检测器系统. 以Ar气作为等离子体工作气体, O2气作为等离子体屏蔽气体, 同时获得了被测组分的原子发射和离子化信息, 并对不同种类有机化合物的相对响应系数及检出限进行了测定.     

常压微波等离子体光离子化检测器

〕本文叙述了一个利用微波能量在常压下激发隋性气体氩或氦产生的等离子体作为光致电离源的气相色谱光离子化检测器。考察了这种检测器的响应与微波功率以及进样量的关系。并利用苯、二硫化碳、四氯化碳、四氯乙烯、甲酸、水等物质测定了这种检测器的性能。     

气相色谱用微波诱导氩等离子体光离子化检测器的研究

本文报道了以Surfatron 表面波为激发器件的微波诱导氩等离子体光离子化检测器,以氩气为载气和工作气体,研究了三种不同类型检测器的结构性能, 通过测量检测器的工作参数及苯的检出限等,对检测器的基本特性和离子化机理进行了探讨,并应用于实际样品分析,结果令人满意     

气相色谱用氦直流等离子体离子化检测器的研究

报道三种不同类型的气相色谱用氦直流等离子体离子化检测器。以氦气为载气和工作气体, 白金电极为放电电极, 通过测量检测器的工作参数, 考察了检测器对H2, O2, Ar, N2, CH4, CO, CO2等永久气体的响应特性及分析性能, 并应用于实际样品分析。对检测器的离子化机理进行了研究和探讨。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.