杜仲中木脂素类化合物纯化工艺研究

对杜仲中木脂素类化合物松脂醇二葡萄糖甙(PDG)和丁香脂素二葡萄糖甙(SDG)进行分离纯化工艺研究。首先采用溶剂萃取法进行一次纯化,再采用大孔吸附树脂优化纯化工艺,最后采用硅胶柱色谱法同时分离、纯化杜仲中松脂醇二葡萄糖甙和丁香脂素二葡萄糖甙,采用反相高效液相色谱法跟踪检测纯度。纯化后得到两种晶体,经过UV、IR、MS和1HNMR定性分析确定为松脂醇二葡萄糖甙和丁香脂素二葡萄糖甙,其纯度分别为90.86%和91.73%,回收率分别为42.14%和47.17%。该纯化方法能获得高纯度的松脂醇二葡萄糖甙和丁香脂素二葡萄糖甙,操作简单、成本低。     

液相组合化学

综述了液相组合化学的研究进展，重点介绍了液相组合合成中的分离纯化方法和合成方法策略，基本分离纯化方法包括利用固相载体协助分离纯化法，相萃取分离纯化法和色谱法，主要合成方法策略有平行合成策略和索引合成策略。     

破碎-絮凝法分离细长碳纳米管与碳纤维

根据碳纤维与细长碳纳米管耐磨性能与絮凝沉降性能的差异，提出了一种有效分离细长碳纳米管与碳纤维的物理方法——破碎-絮凝法.该方法包括研磨破碎、液相分散、絮凝沉降、过滤分离等步骤，可高效去除混杂于细长碳纳米管样品中的碳纤维，同时还可去除螺旋状碳纤维及细小碳颗粒等易悬浮杂质.纯化过程对细长碳纳米管无损伤.用电子显微镜和热重分析表征了纯化效果，并初步分析了纯化机理.     

非共价法分离光学活性单壁碳纳米管

单壁碳纳米管（SWNTs）由于具有独特的物理、化学性质,激起人们极大的研究兴趣。目前生产的SWNTs通常包含等量左旋和右旋对映异构体,无光学活性,极大地限制碳纳米管在光学和光电子领域的研究和应用。已报道的非共价法分离光学活性碳纳米管的方法主要有离子交换色谱法、nanotweezers选择法、密度梯度超高速离心法、共轭聚合物缠绕法和小分子吸附法。本文较为详尽地综述了非共价法分离光学活性碳纳米管的研究进展,对各种分离方法的机理进行阐述,并在此基础上分析这些方法和分离效果的关系,指导设计和合成新型的分离试剂。最后,本文还针对上述研究中存在的问题,提出了旋光性SWNTs分离技术的研究方向。     

焙烧法纯化多壁碳纳米管

自碳纳米管[1 ] 发现以来 ,已在世界范围内掀起了碳纳米管研究和应用的热潮 .其中一些文献报道了纯化单壁碳纳米管的方法 ,如超声波助滤法 [2 ] ,酸洗法 [3,4] ,微孔膜过滤法 [5,6] ,离心法[5] ,氧化法[5,7] ;另有少量文献报道了纯化多壁碳纳米管的方法 ,如氧化法 [5,8] ,石墨插层化合物纯化法 [9] 等 .本文使用焙烧法纯化实验室自制的多壁碳纳米管 .通过 TEM、XRD和比表面积等的测定 ,考察了不同焙烧时间的纯化效果 .采用催化甲烷裂解方法 ,在 6 0 0℃反应 4h制得多壁碳纳米管 ,粗产物收率接近 2 0 % .于干燥、洁净的坩埚中 ,分别称取 6…     

亲和膜色谱法纯化人血浆纤溶酶原

首次以尼龙膜为基质 ,分别采用三氯三嗪和 1 ,4 丁二醇二缩水甘油醚活化法 ,制备了以L 赖氨酸为配基的亲和膜。首次使用亲和膜色谱法成功地从人血浆中快速纯化出了高纯度的纤溶酶原 ,电泳分析显示一个主要的谱带。为规模化快速纯化临床用高纯度纤溶酶原提供了新方法。     

亲和膜色变法纯化人血浆纤溶酶原

首次以尼龙膜为基质,分别采用三氯三嗪和1,4－丁二醇二缩水甘油醚活化法,制备了以L－赖氨酸为配基的亲和膜。首次使用亲和膜色谱法成功地从人血浆中快速纯化出了高纯度的纤溶酶原,电泳分析显示一个主要的谱带,为规模化快速纯化临床用高纯度纤溶酶原提供了新方法。     

磷脂的分离纯化及高效毛细管电泳分析

采用溶剂提取和柱色谱法分离纯化市售大豆粉末磷脂(卵磷脂含量14.05%),得到高纯度的卵磷脂产品(纯度92.80%)。重点建立了磷脂的胶束电动毛细管色谱(MECC)分离分析方法。以分离度和峰面积为优化指标,对表面活性剂及其浓度、电泳缓冲液pH、有机改性剂及其含量、缓冲液浓度、温度等条件进行优化,确定了最优化电泳条件:电泳缓冲液为35 mmol/L脱氧胆酸钠-1 mmol/L 硼砂缓冲液/正丙醇(体积比为57∶43)(pH 8.30),柱温44 ℃,操作电压25 kV,检测波长200 nm;内加法定性磷脂组分;外标法定量卵磷脂。结果表明,MECC法能有效分离5种磷脂组分;0.1～1 g/L的质量浓度范围内卵磷脂的线性关系良好(r=0.9990),平均回收率为98.0%,日内、日间精密度分别为1.36%和3.27%,定性结果与薄层色谱法、红外光谱法的定性结果相符。     

牛胰腺中活性蛋白质的液相色谱分离纯化方法进展

牛胰腺中含有多种活性蛋白,其中许多蛋白已被开发为有利于人类健康的药物。从牛胰腺中分离纯化得到的蛋白药物是一种有高附加值的高技术产品。现代生物技术中所用的大多数有价值的活性蛋白产品的制备仍然依赖于不同的液相色谱法。本文综述了牛胰腺中活性蛋白质的提取方法以及以色谱分离为主的分离与纯化技术,为开展从天然产品中提取并应用蛋白质提供一定的参考。     

一种转基因猪血中重组人血清白蛋白分离纯化新方法

基因工程技术已经成为研究和生产重组人血清白蛋白(rHSA)替代人血清白蛋白(HSA)的重点技术,而白蛋白的纯化则是该技术的关键。本文主要介绍了从转基因猪血中纯化rHSA的一种新方法,即热乙醇沉淀与多级色谱分离相结合的rHSA纯化方法。热乙醇沉淀法可从猪血浆中获得rHSA粗提取液,此时rHSA的纯度可达69.5%,回收率达51.3%。进一步采用多级色谱分离法,即阴离子交换色谱和反相色谱法进一步纯化,得到rHSA的最终纯度约为100.0%,总回收率为41.1%。该方法为从转基因猪血浆中大规模纯化用于临床和生化研究的高纯度rHSA提供可能,同时也为rHSA替代HSA奠定了基础。     

High-speed countercurrent chromatography for purification of single-walled carbon nanotubes

A new chromatographic purification of single-walled carbon nanotubes using high-speed countercurrent chromatography is reported. The purification was accomplished on the basis of experiment that dispersed the single-walled carbon nanotubes with sodium dodecyl sulfate, and the result mixture was separated using the two phase system composed of n-butanol/water = 1/1 （v/v）. The sizes of SWNTs separated were observed by scanning electron microscopy. The results demonstrated that the high-speed countercurrent chromatography possessed a good efficency for purification of single-walled carbon nanotubes.     

碳纳米管的纯化

目前制备碳纳米管的方法很多，然而这些方法所制得的产物中除碳纳米管外常常还含有无定形碳、碳纳米粒子及催化剂颗粒等杂质，这些杂质的存在直接影响到碳纳米管的性能测试及其应用研究，因此碳纳米管的纯化研究十分必要与重要。而不同制备方法所得碳纳米管的性质以及所引入的杂质都不相同，这就增加了碳纳米管纯化研究的难度。本文结合该领域研究前沿对碳纳米管的纯化机理及方法做了系统的介绍。     

Analytical application of carbon nanotubes,fullerenes and nanodiamonds in nanomaterials-based chromatographic stationary phases: A review

An overview of the most significative results so far attained in the application of carbon nanotubes, fullerenes and nanodiamonds as chromatographic separation media is presented. In particular, the authors focus on their use in capillary and packed-column gas chromatography, in high performance liquid chromatography and capillary electrochromatography, paying also attention to recently developed stationary phases for fast chromatography and nanochromatography. The performance of the nanomaterials is compared to that of planar and amorphous carbon sorbents and critically discussed in regard to retentive capability and selectivity. A wide part of this review is devoted to the most recent improvements achieved in terms of selectivity by use of functionalized nanotubes and by combination of carbon nanotubes with ionic liquids. Practical aspects of synthetic procedures in preparing novel stationary phases in relationship with their chromatographic behaviour are also commented.     

Present and future applications of carbon nanotubes to analytical science

This article reviews the impact of carbon nanotubes on analytical science, and the main current and future applications of carbon nanotubes in this field. Given that it is necessary to solubilize carbon nanotubes for many applications, we consider the procedures developed to achieve this. The use of carbon nanotubes in analytical chemistry as a target analyte and as an analytical tool is also discussed. Chromatographic and electrophoretic methods used to separate and characterize carbon nanotubes are presented. The use of carbon nanotubes as an analytical tool in filters and membranes, as sorbent material for solid phase extraction, in electrochemical (bio)sensors, and in separation methods is discussed. It is clear that while nanotubes are being tested for use in many different fields, their truly enormous potential has yet to be realized in analytical chemistry.Dedicated to the memory of Wilhelm Fresenius     

Nanotube Content in Arc Generated Carbon Powder

 A novel experimental technique for the separation of nanotubes from other unwanted carbon species in arc generated carbon soot is described. A conjugated polymer was used to bind to nanotubes in solution. The resultant hybrid was soluble, whereas extraneous carbon material formed a sediment at the bottom of the sample bottle. The process was monitored using electron paramagnetic resonance (EPR) spectroscopy showing that 63% of nanotubes were kept in solution and 98.1% of impurities were rejected. This non-destructive purification allowed the calculation of the nanotube content in the carbon soot using EPR and thermogravimetric analysis (TGA). The measurement of nanotube content gave a purity value of 34% for the soot used in this study; this is compatible with estimates from electron microscopic determinations.     

Carbon nanotubes,science and technology part (I) structure,synthesis and characterisation

Since their discovery in 1991 by the Japanese scientist “Sumio Iijima”, carbon nanotubes have been of great interest, both from a fundamental point of view and for future applications. Different types of carbon nanotubes can be produced in various ways. Economically feasible large-scale production and purification techniques are still under development. Carbon nanotubes are discussed in this review in terms of history, types, structure, synthesis and characterisation methods. Carbon nanotubes have attracted the fancy of many scientists worldwide. The unique and unusual properties of these structures make them a unique material with a whole range of promising applications.     

基于碳纳米材料的毛细管电色谱固定相研究进展

碳纳米材料由于其具有独特的纳米结构、大的比表面积、较强的热稳定性、良好的导电性以及较好的吸附性能等物理化学性质,因而在分析科学、生命科学、材料科学及环境科学等领域得广泛的应用.结合国内外最新文献,对近5年来碳纳米材料在毛细管电色谱新型固定相的制备研究方面进展进行了评述,包括毛细管电色谱的分类及分离机理、毛细管电色谱柱的制备方法和优缺点,碳纳米材料(石墨烯、碳纳米管、氧化石墨烯、还原氧化石墨烯、富勒烯)的结构性质及制备方法、碳纳米材料在毛细管电色谱柱固定相中的应用及作用机理等,并对其在色谱应用领域的方向进行了展望.     

Nanotube Content in Arc Generated Carbon Powder

Summary.  A novel experimental technique for the separation of nanotubes from other unwanted carbon species in arc generated carbon soot is described. A conjugated polymer was used to bind to nanotubes in solution. The resultant hybrid was soluble, whereas extraneous carbon material formed a sediment at the bottom of the sample bottle. The process was monitored using electron paramagnetic resonance (EPR) spectroscopy showing that 63% of nanotubes were kept in solution and 98.1% of impurities were rejected. This non-destructive purification allowed the calculation of the nanotube content in the carbon soot using EPR and thermogravimetric analysis (TGA). The measurement of nanotube content gave a purity value of 34% for the soot used in this study; this is compatible with estimates from electron microscopic determinations. Received June 23, 2000. Accepted July 3, 2000     

Separation of carbon nanotubes by frit inlet asymmetrical flow field-flow fractionation

Flow field-flow fractionation (flow FFF), a separation technique for particles and macromolecules, has been used to separate carbon nanotubes (CNT). The carbon nanotube ropes that were purified from a raw carbon nanotube mixture by acidic reflux followed by cross-flow filtration using a hollow fiber module were cut into shorter lengths by sonication under a concentrated acid mixture. The cut carbon nanotubes were separated by using a modified flow FFF channel system, frit inlet asymmetrical flow FFF (FI AFIFFF) channel, which was useful in the continuous flow operation during injection and separation. Carbon nanotubes, before and after the cutting process, were clearly distinguished by their retention profiles. The narrow volume fractions of CNT collected during flow FFF runs were confirmed by field emission scanning electron microscopy and Raman spectroscopy. Experimentally, it was found that retention of carbon nanotubes in flow FFF was dependent on the use of surfactant for CNT dispersion and for the carrier solution in flow FFF. In this work, the use of flow FFF for the size differentiation of carbon nanotubes in the process of preparation or purification was demonstrated.     

Chromatographic purification and properties of soluble single-walled carbon nanotubes.

We report an improved chromatographic purification of soluble single-walled carbon nanotubes (s-SWNTs) using gel permeation chromatography. Three fractions are separated by gel permeation chromatography, and the first fraction contains 74% of the s-SWNTs as detected by atomic force microscopy and UV and near-infrared spectroscopy.