Capillary electrochromatographic separation of enantiomers on chemically bonded type of cellulose derivative chiral stationary phases with a positively charged spacer

Positively charged chiral stationary phases (CSPs) were prepared for capillary electrochromatography (CEC) separation of enantiomers by chemically immobilizing cellulose derivatives onto diethylenetriaminopropylated silica (DEAPS) with tolylene-2,4-diisocyanate (TDI) as a spacer reagent. Anodic electroosmotic mobility was observed in both nonaqueous and aqueous mobile phases due to the positively charged amines on the surface of the prepared CSPs. For comparison, the traditionally used 3-aminopropyl silica (APS) was also adopted as the base material instead of DEAPS to prepare CSP. It was observed that the EOF on the DEAPS-based CSP was 18%-60% higher than that on the APS-based CSP under nonaqueous mobile phase conditions. Separation of enantiomers in CEC was performed on the positively charged CSPs with the nonaqueous mobile phases of pure ethanol or mixture of hexane-alcohol and the aqueous phases of acetonitrile-water or 95% ethanol. Fast separation of enantiomers was achieved on the newly prepared CSPs.     

Capillary electrochromatographic separation of enantiomers under aqueous mobile phases on a covalently bonded cellulose derivative chiral stationary phase

A chemically bonded cellulose tris(3,5-dimethylphenylcarbamate) chiral stationary phase (CSP) was prepared by a radical polymerization reaction. The prepared CSP was packed into fused-silica capillaries with inner diameter of 75 microm to perform enantiomer separations in CEC. The electrochromatographic behavior of the CSP was investigated. On the prepared CSP, high EOF could be generated under acidic mobile phases, which represented an advantage for the separation of acidic enantiomers. Several neutral, acidic, and basic enantiomers were resolved on the prepared CSP under aqueous mobile phases. The column efficiencies were between 20,000 and 100,000 plates/m, which were much higher than those of HPLC. In addition, it was observed that the separation of some enantiomers benefited from the adoption of THF as mobile phase modifier.     

Enantioseparations on amylose tris(5-chloro-2-methylphenylcarbamate) in nano-liquid chromatography and capillary electrochromatography

Amylose tris(5-chloro-2-methylphenylcarbamate) was coated onto native and aminopropylsilanized silica in order to prepare chiral stationary phases (CSP) for enantioseparations using nano-liquid chromatography (nano-LC) and capillary electrochromatography (CEC). The effect of the nature of silica, the particle size and pore diameter, the chiral selector loading onto silica, the mobile phase composition and pH, as well as separation variables such as a linear flow rate of the mobile phase, applied voltage in CEC, etc. on the separation of enantiomers was studied. It was found that CSPs based on amylose tris(5-chloro-2-methylphenylcarbamate) can be used for preparation of stable capillary columns for enantioseparations by nano-LC and CEC in combination with polar organic and aqueous–organic mobile phases. Higher peak efficiency was observed in CEC than in nano-LC.     

A glycopeptide antibiotic chiral stationary phase for the enantiomer resolution of hydroxy acid derivatives by capillary electrochromatography

Separation of hydroxy acid enantiomers was achieved by using capillary electrochromatography (CEC) employing a chiral stationary phase (CSP) based on MDL 63,246 (Hepta-Tyr), a macrocyclic antibiotic of the teicoplanin family. The chiral selector was chemically bonded to 5 num diol-modified silica particles and the CSP mixed with amino silica (3:1 w/w) was packed into a 75 num ID fused-silica capillary. The CEC experiments were carried out by using an aqueous reversed-phase mode for the enantiomeric resolution of hydroxy acid compounds. Good enantioresolution was achieved for mandelic acid (MA), m-hydroxymandelic acid (m-OH-MA), p-OH-MA, and 3-hydroxy-4-methoxymandelic acid (3-OH-4-MeO-MA). The CEC system was less enantioselective towards 2-phenyllactic acid (2-PhL) and 3-PhL while mandelic acid methyl ester (MA-Et-Est) enantiomers were not resolved. Several experimental parameters, such as organic solvent type and concentration, buffer pH, capillary temperature, on enantioresolution factor, retention time, and retention factor were studied.     

Preparation of an open-tubular capillary column with a monolithic layer of S-ketoprofen imprinted and 4-styrenesulfonic acid incorporated polymer and its enhanced chiral separation performance in capillary electrochromatography

Enhanced chiral separation performance has been observed for ketoprofen enantiomers in capillary electrochromatography (CEC) with an open-tubular (OT) column prepared with a specific molecule imprinted polymer (MIP) on the innerwall of 50mum ID capillary. The column was prepared by in situ thermal polymerization inside the pretreated and silanized fused silica capillary. A specific diluted monomer mixture composed of S-ketoprofen, methacrylic acid (MAA, functional monomer), ethylene glycol dimethacrylate (EDMA, cross-linker), and 4-styrenesulfonic acid (4-SSA) dissolved in 9/1 (v/v) acetonitrile/2-propanol was used to fabricate the OT-MIP layer. 4-SSA was added to form a MIP layer capable of stable and strong electro-osmotic flow (EOF) over the pH range of this study securing CEC elution of ketoprofen having partial negative charge near the optimized pH. Various parameters such as buffer pH, organic modifier composition, salt concentration, and applied potential have been optimized for CEC chiral separation of ketoprofen enantiomers. Very good separation selectivity and efficiency were observed, thus the chromatographic resolution of ketoprofen enantiomers was as high as 10.5, and the number of theoretical plates of R-ketoprofen, 156,000/m (40,000/m for S-ketoprofen), which proves that the OT-MIP-CEC type approach is a promising strategy in MIP study.     

Chromatographic evaluation and comparison of three beta-cyclodextrin-based stationary phases by capillary liquid chromatography and pressure-assisted capillary electrochromatography

Enantiomer separations were performed on three beta-cyclodextrin-based chiral stationary phases (CSP) containing the pernaphthylcarbamoylated beta-cyclodextrin (CSP 1), peracetylated beta-cyclodextrin (CSP 2) and permethylated beta-cyclodextrin (CSP 3) as chiral selectors by capillary liquid chromatography and pressure-assisted capillary electrochromatography in this study. Triethylammonium acetate/MeOH or phosphate buffer/MeOH was used as the mobile phase. The experimental factors affecting chiral separations have been examined for each CSP, including pH of the buffers, methanol content and applied voltage. Under optimal separation conditions, a number of racemic compounds were resolved into their enantiomers on three cyclodextrin-based CSP. A comparative study on the performance of three CSP revealed the presence of carbonyl functional groups as well as aromatic rings in the cyclodextrin derivatives, enhanced the interaction between the analytes and CSP, and thus improved enantioselectivity of the CSP.     

伊瑞霉素键合手性毛细管整体柱的制备与对映体分离

以具有22个不同种类手性中心的新型大环抗生素伊瑞霉素为手性选择器,基于环氧基团高反应活性的特征,将伊瑞霉素用一步法键合到甲基丙烯酸酯整体柱表面制备伊瑞霉素键合手性毛细管整体柱。通过对制备条件进行优化,证实该制备方法可在较宽的pH范围(6.0～9.0)内进行,方法简单易行,反应条件温和。应用制备的手性毛细管整体柱在毛细管电色谱模式下,对5种手性氨基酸对映体和手性药物罗格列酮对映体进行拆分,均得到了基线分离,说明伊瑞霉素手性固定相具有较强的手性拆分能力。在优化的色谱条件下,6种对映体的分析时间均小于4 min,分析速度快。通过对有机调节剂、缓冲液pH值和缓冲盐浓度等分离条件进行系统考察,初步探讨了该手性毛细管整体柱对不同溶质的手性识别机理。     

金纳米粒子修饰的手性毛细管电色谱固定相的制备及性能表征

制备了粒径为15 nm的金纳米粒子(GNPs)并将其修饰到氨基衍生化的硅胶整体柱内,通过化学键合法将牛血清白蛋白(BSA)固载到GNPs的表面作为手性固定相。通过透射电子显微镜、扫描电子显微镜等方法进行表征,结果表明,GNPs分散性良好,并被成功地修饰到毛细管柱内,含量高达17.18%。优化了BSA手性柱的制备条件,最终确定了体积分数为10%的3-氨丙基三乙氧基硅烷(APTES)和15 g/L BSA为最佳反应条件。在毛细管电色谱分离模式下,对缓冲液pH值、电压等分离条件进行了考察,最终选择了10 mmol/L pH 7.4的磷酸缓冲液和15 kV运行电压作为最佳分离条件。手性柱对3种手性化合物(色氨酸、阿替洛尔和麻黄碱)有拆分效果,对色氨酸能实现基线分离。与物理吸附法相比,化学键合法制备的手性柱拆分效果好,分析物无需柱前衍生化,且色谱柱稳定性良好。该文的制备方法也为其他类型手性选择剂的引入提供了良好的思路。     

吸附固定相电色谱和动态改性电色谱的手性分离

对动态改性电色谱手性分离进行了研究。电色谱柱填充强阴离子交换固定相（SAX0,添加在流动相中的磺化β－环糊精（S－CD）动态地吸陵于SAX填料表面,形成一层准手性固定相。色氨酸、阿托品和异博定对映体在本体系获得了很好的分离,它们的分离分别为2．06,10．1和1．96,对映体峰的柱效价于85,000塔板数／米和412,000塔板数／米之间。连续运行17次,死时间和色氨酸对映体的电色谱保留因子的相对标准偏差分别为0．53％,0．62％和0．69％。此外,以吸附于SAX填料的牛血清白蛋白和S－CD为手性固定相进行了电色谱手性分离的研究。在这两种体系下分离色氨酸对映体的分离度分别为3．86和2．97。吸附S－CD柱电色谱和动态改性电谱的重现性进行子比较,发现动态改性电色谱有更好的重现性。     

Chemically L-prolinamide-modified monolithic silica column for enantiomeric separation of dansyl amino acids and hydroxy acids by capillary electrochromatography and mu-high performance liquid chromatography

A silica-based chiral monolithic column prepared by sol-gel process and chemical modification of chiral selector was used for enantioseparation of dansyl amino acids and hydroxy acids by capillary electrochromatography (CEC) and mu-high-performance liquid chromatography (mu-HPLC). L-Prolinamide was modified as a chiral selector. The chiral stationary phase (CSP), the chiral complex of Cu(II) with L-prolinamide, provides an anodic electroosmotic flow (EOF) in CEC. The EOF was found to be dependent on applied electric field strength, the pH, and the composition of mobile phases. Scanning electron micrograph showed that monolithic columns have the morphology of continuous skeleton and large through-pore. D-Enantiomers migrated before L-enantiomers except for dansyl-(Dns)-DL-Ser. The separation efficiencies of up to 17600 (D) and 13,200 plates m(-1) (L) were achieved for the separation of DL-indole-3-lactic acid.     

Enantioselective reversed-phase and non-aqueous capillary electrochromatography using a teicoplanin chiral stationary phase

Enantiomeric separation of chiral pharmaceuticals is carried out in aqueous and non-aqueous packed capillary electrochromatography (CEC) using a teicoplanin chiral stationary phase (CSP). Capillaries were slurry packed with 5 microm 100-A porous silica particles modified with teicoplanin and initially evaluated using a non-aqueous polar organic mode system suitability test for the separation of metoprolol enantiomers (Rs = 2.3 and 53000 plates m(-1)). A number of pharmaceutical drugs were subsequently screened with enantioselectivity obtained for 25 racemic solutes including examples of neutral, acidic and basic molecules such as coumachlor (Rs = 3.0 and 86000 plates m(-1)) and alprenolol (Rs = 3.3 and 135000 plates m(-1)) in reversed-phase and polar organic mode, respectively. A statistical experimental design was used to investigate the effects of non-aqueous polar organic mobile phase parameters on the CEC electroosmotic flow, resolution and peak efficiency for two model solutes. Results primarily indicated that higher efficiency and resolution values could be attained at higher methanol contents which is similar to findings obtained on this phase in liquid chromatography.     

Polyacrylamide-based monolithic capillary column with coating of cellulose tris(3,5-dimethylphenyl-carbamate) for enantiomer separation in capillary electrochromatography

A hydrophilic chiral capillary monolithic column for enantiomer separation in CEC was prepared by coating cellulose tris(3,5-dimethylphenyl-carbamate) (CDMPC) on porous hydrophilic poly(acrylamide-co-N,N'-methylene-bisacrylamide) (poly(AA-co-MBA)) monolithic matrix with confine of a fused-silica capillary. The coating conditions were optimized to obtain a stable and reproducible chiral stationary phase for CEC. The effect of organic modifier of ACN in aqueous mobile phase for the enantiomer separation by CEC was investigated, and the significant influence of ACN on the enantioresolution and electrochromatographic retention was observed. Twelve pairs of enantiomers including acidic, neutral, and basic analytes were tested and nine pairs of them were baseline-enantioresolved with acidic and basic aqueous mobile phases. A good within-column repeatability in retention time (RSD = 2.4%) and resolution (RSD = 3.2%) was obtained by consecutive injections of a neutral compound, benzoin, on a prepared chiral monolithic column, while the between-column repeatability in retention time (RSD = 6.4%) and resolution (RSD = 9.6%) was observed by column-to-column examination. The prepared monolithic stationary phase showed good stability in either acidic or basic mobile phase.     

Enantiomer separations by capillary electrochromatography using chiral stationary phases

The applicability of capillary electrochromatography (CEC) using packed capillary column to enantiomer separations was investigated. As chiral stationary phases, OD type packing materials of 5 and 3 microm particle diameters, originally designed for conventional high-performance liquid chromatography (HPLC) were employed. The chiral packing materials were packed by a pressurized method into a 100 microm I.D. fused-silica capillary. Several racemic enantiomers, such as acidic, neutral and basic drug components, were successfully resolved, typically by using acidic or basic solutions containing acetonitrile as mobile phases. The separation efficiencies for some enantiomers in the chiral CEC system using the 5 microm OD type packing were superior to those obtained in HPLC using chiral packings. The plate heights obtained for several enantiomers were 8-13 microm or the reduced plate height of 1.6-2.6, which indicates the high efficiency of this chiral CEC system.     

Coatings of one monomer molecularly imprinted polymers for open tubular capillary electrochromatography

One monomer molecularly imprinted polymer coatings were first synthesized in fused silica capillary columns with 2-methacrylamidopropyl methacrylate (MAM) as single functional monomer in addition to a cross-linking monomer. Since MAM may generate no or little EOF, a strategy of precursor of polymerization, which does not interfere with the formation of defined imprints, was used to introduce an ionizable functional monomer to generate a stable electroosmotic flow for electrochromatography (CEC) by post-polymerization hydrolization. The resulting MAM-based open-tubular imprinted capillary was able to separate enantiomers by means of CEC. The resolution of enantiomers separation achieved on S-amlodipine-imprinted capillary was up to 16.1. The strong recognition ability (selectivity factor was 3.23) and high column performance (theory plates was 26,053 plates m(-1)) of template were obtained. The MIP coatings were also prepared using either S-naproxen or S-ketoprofen as template molecule. The resolutions of enantiomers separation were 2.20 and 4.56, respectively. The results illustrate that the synthesis of MIP using one monomer is not only an experimental-simplified process, but also an approach to producing chiral stationary phase with high efficiency and selectivity.     

Separation of enantiomers by nanoliquid chromatography and capillary electrochromatography using a bonded cellulose trisphenylcarbamate stationary phase

A cellulose trisphenylcarbamate-bonded chiral stationary phase was applied to nano-liquid chromatography (nano-LC) and capillary electrochromatography (CEC) with nonaqueous and aqueous solutions as the mobile phases. Several chiral compounds were successfully resolved on the prepared phase by nano-LC. The applicability of nonaqueous CEC on a cellulose derivative stationary phase was investigated with the organic solvents methanol, hexane, 2-propanol, and tetrahydrofuran (THF) containing acetic acid, as well as triethylamine as the mobile phases. Enantiomers of warfarin and praziquantel were baseline-resolved with plate numbers of 82,300 and 38,800 plates/m, respectively, for the first eluting enantiomer. The influence of applied voltage, concentration of nonpolar solvent, apparent pH, and buffer concentration in the mobile phase on the electroosmotic flow (EOF) and the mobility of the enantiomers was evaluated. Enantioseparations of trans-stilbene oxide and praziquantel were also achieved in aqueous CEC with plate numbers of 111,100 and 107,400 plates/m, respectively, for the first eluting enantiomer. A comparison between nonaqueous CEC and aqueous CEC based on a cellulose trisphenylcarbamate stationary phase was discussed. Pressure-assisted CEC was examined for the chiral separation of praziquantel and faster analysis with high enantioselectivity was acquired with the proper pressurization of the inlet vial.     

胃蛋白酶亲和有机聚合物毛细管整体柱的制备及性能考察

以热引发原位聚合方法制备了聚（甲基丙烯酸缩水甘油酯（glycidyl methacrylate,GMA）-乙二醇二甲基丙烯酸酯（ethyleneglycol dimethacrylate,EDMA））毛细管整体柱,对整体柱的性能进行了表征。结果表明,柱内部结构均匀、渗透性好;整体柱能够实现苯等中性小分子化合物的分离,具有反相色谱特征,重现性和稳定性良好。利用整体柱环氧基团的活性,采用间接法,以戊二醛为连接臂制备胃蛋白酶亲和手性整体柱。在毛细管电色谱模式下进行了柱分离性能研究,并对缓冲液pH值和运行电压等分离条件进行了考察。结果表明,亲和整体柱对4种碱性手性药物（奈福泮、氨氯地平、西酞普兰、扑尔敏）有拆分效果,奈福泮、氨氯地平、西酞普兰能达到基线分离。本文为蛋白质亲和毛细管电色谱整体柱的制备和应用提供了新的思路和方法。     

丙烯酰胺-β-环糊精毛细管电色谱手性整体柱的制备及应用

以丙烯酰胺-β-环糊精和聚甲基丙烯酸缩水甘油酯为功能单体,乙二醇二甲基丙烯酸酯为交联剂,采用原位聚合法制备了聚丙烯酸酯-β-环糊精手性毛细管整体柱。 通过红外和扫描电子显微镜表征了整体柱固定相的结构和形貌。 并以苯丙氨酸为考察物考察了柱子的稳定性和重现性,柱效达到47701 plates/m,获得了良好的分离效果。 在毛细管电色谱模式下,采用丙烯酰胺-β-环糊精整体柱首次拆分盐酸依替福林对映体,结果使盐酸依替福林对映体达到了基线分离。     

Open tubular layer of S‐ofloxacin imprinted polymer fabricated in silica capillary for chiral CEC separation

An open tubular molecule imprinted polymer (OT‐MIP) capillary column has been prepared for chiral separation of ofloxacin enantiomers in CEC. The S‐ofloxacin imprinted OT column was fabricated by thermally initiated non‐covalent polymerization procedure inside a pretreated and silanized fused silica capillary. The template molecule was incorporated with methacrylic acid (MAA), ethylene glycol dimethacrylate (EDMA) and 4‐styrenesulfonic acid (4‐SSA) and dissolved in a porogen mixture of ACN/2‐propanol (9:1). The separation efficiency of the 4‐SSA MIP column was found quite better than that of the MIP column without 4‐SSA. It has been demonstrated that our OT‐MIP column can separate ofloxacin enantiomers with excellent chiral separation efficiency after tuning the various chromatographic conditions. The optimized chromatographic eluent was 85:15, v/v%, ACN/60 mM sodium acetate at pH 7. The separation efficiency and selectivity of chiral separation of this study were far better than those obtained by previous methods for chiral separation of R‐ and S‐ofloxacin.     

α-烯基-β-环糊精毛细管电色谱整体柱的制备与评价

将烯丙基缩水甘油醚(AGE)和β-环糊精在碱性条件下作用得到带有α烯基的环糊精衍生物——4(3-烯丙氧-2-羟基)丙氧基-β-环糊精(PCD),利用这种衍生物和甲基丙烯酸甘油酯(GMA)为功能单体,在毛细管中通过原位聚合反应,一步法制备得到了新型β-环糊精聚合物毛细管电色谱手性整体柱.在毛细管电色谱(CEC)模式下,应...     

Recent progress in enantiomer separation by capillary electrochromatography

Enantiomer separation by electrochromatography (CEC) can be performed in three modes: (i) open-tubular capillary electrochromatography (o-CEC), in which the chiral selector is physically adsorbed coated, and thermally immobilized or covalently attached to the internal capillary wall; (ii) packed capillary electrochromatography (p-CEC), in which the capillary is either filled with chiral modified silica particles or with an achiral packing material, and a chiral selector is added to the mobile phase; and (iii) monolithic (rod)-capillary electrochromatography (rod-CEC) in which the chiral stationary phase (CSP) consists of a single piece of porous solid. We present an overview on methods and new trends in the field of electrochromatographic enantiomer separation such as CEC with either nonaqueous mobile phases or stationary phases with incorporated permanent charges, or with packing beds consisting of nonporous silica particles or particles with very small internal diameters.