含锆、钙熔铁型氨合成催化剂的M?ssbauer谱

含锆催化剂;含钙催化剂;熔铁催化剂;含锆、钙熔铁型氨合成催化剂的M?ssbauer谱     

铁基超细粒子催化剂结构与还原行为的Mossbauer谱研究

铁基超细粒子催化剂具有优良的F －T反应性。本工作利用原位Mossbauer谱辅以XRD技术研究了含有钾助剂的F－T合成铁基超细粒子催化剂的结构与还原行为，考察了催化剂组成和第二金属组分（Mn,Zn,Mg）的影响。“纯”铁超细粒子催化剂在氢气中很容易经Fe3O4还原为零价铁。第二金属组分的引入，一方面了阻碍了催化剂的还原，另一方面稳定了Fe^2 的存在而使其成为还原的主要中间相，这有利于反应条件下形成类晶石结构的活性相。对于Fe-Mn催化剂，上述效应随锰含量的增加而更趋显著。铁基超细粒子催化剂在氢气中还原能力依“纯”Fe>Fe-Zn>Fe-Mn>Fe-Mg的顺序递减，这在一定程度上反映了铁与第二金属组分之间相互作用的强弱。     

水溶性膦配体络合金属催化剂的进展

均相催化剂与多相催化剂相比有许多优点,如在均相催化剂中,全部中心金属原子均参与构成活性种;具有确定均一的结构;催化剂浓度低,具有高活性、高选择性;反应条件温和;不存在扩散问题;传热易于解决等.但是,均相催化剂与产物的分离问题给工业生产带来了困难,特别是对产品沸点高的均相催化过程,显得更为突出,加之所用催化剂大多是贵重金属,因此,均相催化剂的分离回收一直是催化剂研究领域的一个热点.如均相催化多相化的研究,即通过高分子锚定,无机载体固定、双重固载及液相担载等方法,使均相催化剂多     

二甲醚水蒸气重整制氢的ZSM-5和Cu-Zn的复合催化体系（英文）

二甲醚水蒸气重整制氢反应是燃料电池理想的供氢方式之一.探讨了二甲醚水蒸气重整过程中的反应与反应、反应与传热的耦合协同效应.采用二甲醚水解催化剂ZSM-5（硅铝比为25）和甲醇水蒸气重整催化剂（Cu-Zn系列及商用Cu-Zn-Al催化剂）混合制得二甲醚水蒸气重整的复合催化剂.在固定床反应装置中评价了催化剂活性并对催化剂进行了透射电镜、X射线衍射及N2吸附表征.结果表明,复合催化剂的活性除了受催化剂组成和铜含量的影响外,还与Al和Zr的量有关.在Cu：Zn摩尔比为60：30时,Al和Zr的同时加入使催化剂中Cu晶粒分散最好,催化剂具有较高的低温活性,二甲醚在空速为4922ml/（g·h）和260℃下的转化率达到72%.     

高温煤气中氨的脱除：Ⅰ.氨催化分解催化剂的筛选

制备和筛选了１２ 种氨催化分解催化剂,所选催化剂包括Ｃｕ － Ｍｎ 基脱硫剂,Ｚｎ－ Ｔｉ 基脱硫剂,Ｆｅ 基催化剂及Ｎｉ 基催化剂四大类,其中Ｎｉ－２ 催化剂及Ｎｉ－ ３ 催化剂具有较高的转化率。然后对Ｎｉ－３ 催化剂进行了寿命试验,１００ｈ 内其活性基本维持不变;耐硫性实验表明Ｎｉ－３ 催化剂具有一定的耐硫性能,因而它是所选的最优催化剂     

非晶态合金催化剂用于二甲基紫脲酸加氢反应

二甲基紫脲酸加氢反应;nicob/白炭黑催化剂;非晶态合金催化剂     

铜基催化剂上乙醇还原Nox的研究

铜基催化剂上乙醇还原Nox的研究;铜基催化剂;乙醇;Nox     

制备条件对Ni在Al_2O_3表面上的分配形态及Ni/Al_2O_3体系催化加氢性能的影响

用比表面和孔体积测定、XRD和程序升温还原(TPR)方法研究了一系列不同制备条件对Ni在Al_2O_3表面上的分配形态及其对CO加氢反应催化性能的影响.实验发现,本文所用制备条件对催化剂的比表面、孔体积及孔径分布无显著的影响.浸渍时间愈长,催化剂上能在较低温度下还原的物种愈少,催化剂上CO的加氢活性愈低;在浸渍前对载体作室温抽空处理后制得的催化剂上,Ni在Al_2O_3表面是高度分散的,这一高度分散物种易于在低温下还原,使该催化剂具有很高的CO加氢活性和生成CH_4选择性;载体的抽空温度及对载体加热均对Ni物种形态及其分配、催化剂性能有明显影响.     

手性有机分子催化剂在不对称催化中的应用

近三十年来,不对称催化研究获得了迅猛发展[1].按手性催化剂的种类分,一般可分为手性有机金属配合物催化以及路易斯酸、碱等手性有机分子催化.手性有机金属配合物催化剂在不对称还原、不对称氧化等官能团转化反应中的应用,已达到实用阶段;不使用金属的有机分子催化剂由于其对环境友好,也日益被重视,有机合成化学中十分重要的碳-碳键形成反应,如Aldol反应、Diels-Alder反应等,近年来发表了很多使用手性有机分子催化剂的成功的实例.早在1971年Wiechert[2]等人曾以脯氨酸为催化剂,用于分子内不对称醇醛缩合(Aldol)反应,1974年Hajos[3]等…     

合成氨催化剂研究的新进展

 近20多年来,随着英国BP公司钌基催化剂的发明和我国亚铁基熔铁催化剂体系的创立,标志着合成氨催化剂进入了一个新的发展时期,由唯一的传统Fe3O4路线发展为三条技术路线,并各自取得了重大进展．本文扼要介绍了Fe3O4基传统催化剂和钌基催化剂的主要研究成果和发展趋势,着重综述了我国独创的Fe1－xO基熔铁催化剂的发现及其高活性机理探讨方面的研究成果．回顾了20世纪合成氨工业及其催化剂从创立、发展,到取得辉煌成就的历程,展望了21世纪的发展趋势．     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.