DFT方法研究酸性沸石上苯与乙烯烷基化反应的机理

采用B3LYP/6-31G*水平计算来研究酸性沸石上苯与乙烯的烷基化反应历程,从生成能和反应活化能角度分析并讨论了苯与乙烯的反应机理.选取4T簇模型模拟分子筛的酸性位,使用密度泛函理论对烷基化反应三种不同的反应机理(两个联合反应机理和一个分步反应机理)进行计算分析.结果表明,在联合反应机理中,乙烯的质子化和苯与乙烯间C-C键的形成同时发生;分步反应机理中,首先形成一个稳定的乙醇盐中间物种,然后与苯分子反应形成乙苯.联合机理速控步骤的活化能约为160kJ/mol,分步机理速控步骤的活化能为190.24kJ/mol,因此,酸性沸石上苯与乙烯烷基化反应机理主要以联合机理为主,但分步机理与其有一定程度的竞争。     

H-ZSM-5分子筛上苯与乙醇和乙烯烷基化反应的理论研究

采用ONIOM2(B3LYP/6-31G(d):UFF)计算方法研究了H-ZSM-5分子筛上苯与乙醇和乙烯烷基化反应历程.选取40T簇模型模拟了H-ZSM-5分子筛位于孔道交叉点的酸性位.从生成能和反应活化能角度分析并比较了苯与乙醇和乙烯烷基化反应机理.结果表明,苯与乙醇的烷基化按照分步机理进行,速控步骤的活化能为170.34 kJ/mol.而乙烯作为烷基化剂与苯反应时同时存在联合机理和分步机理,且二者之间存在一定程度的竞争,其中联合机理的活化能为167.24 kJ/mol,分步机理速控步骤的活化能为155.20 kJ/mol.比较苯与乙醇和乙烯发生烷基化反应的机理可以看出,二者作为烷基化试剂对烷基化反应性能影响不大.     

Ga/HZSM-5分子筛上乙烯二聚反应的理论研究

应用理论计算方法研究了Ga/HZSM-5及Al/HZSM-5 分子筛上乙烯二聚生成1-丁烯的反应历程, 比较了分子筛酸性对反应能量的影响. 计算采用分为两层的76T簇模型, 应用量子力学和分子力学联合的 ONIOM2 (B3LYP/6-31G(d, p):UFF) 方法. 乙烯二聚过程可按照分步机理和协同机理进行, 均得到表面丁基烷氧中间产物. 计算结果表明, 与在Al/HZSM-5分子筛上的反应过程相比, 乙烯在 Ga/HZSM-5分子筛上的吸附能低 20.62 kJ·mol^-1, 但质子化反应的活化能只高出1.26 kJ·mol^-1; 而乙基烷氧中间体与乙烯分子结合过程的活化能高出 62.55 kJ·mol^-1, 原因是Ga 原子半径大, 降低了六元环过渡态的稳定性. 若按协同机理, 质子转移和C―C键聚合同时进行, 在 Ga/HZSM-5分子筛上的活化能较Al/HZSM-5的高16.44 kJ·mol^-1. 因此乙烯二聚按照协同机理有利. 研究还表明, 表面丁基烷氧中间体脱质子, 生成1-丁烯并吸附在复原的分子筛酸性位上. 该反应在两种酸中心上的活化能几乎相同, 但明显高于其他各步的活化能, 因此成为整个反应的速度控制步骤.     

HZSM-5 分子筛上乙烯芳构化过程中 C4 至 C6 中间体的反应机理

 应用量子力学和分子力学联合的 ONIOM2 (B3LYP/6-31G(d,p):UFF) 方法, 采用包含分子筛孔道结构的 78T 簇模型, 对 HZSM-5 分子筛上乙烯芳构化过程中 C4 至 C6 中间体的反应历程进行了研究, 探讨了分子筛的酸催化机理和择形催化作用. 结果表明, 作为乙烯二聚产物的表面正丁基烷氧络合物 (C4) 直接与乙烯作用得到正己基烷氧络合物 (C6), 在分子筛孔穴尺寸的限制下, 很难实现碳链的折叠环化. 按照间歇反应历程, 丁基烷氧络合物先发生 C–O 键断裂, 脱质子生成 1-丁烯, 然后在酸性位上再与乙烯加成, 在分子筛表面生成 3-甲基戊基烷氧络合物. 该烷氧络合物脱除质子给分子筛, 同时环化生成甲基环戊烷, 后者再与分子筛酸性质子共同脱除氢分子, 生成不稳定的碳正离子中间体, 然后重构成环己烷正离子. 丁基烷氧络合物脱质子的活化能为 158.42 kJ/mol; 1-丁烯与乙烯加成反应的活化能为 130.71 kJ/mol; 3-甲基戊基烷氧络合物脱氢环化生成甲基环戊烷的活化能为 122.06 kJ/mol. 由于孔穴的限域作用, 五员环的甲基环戊烷是重要的中间体.     

异戊烯与甲醇成醚反应机理的量子化学研究

对2-甲基-1-丁烯、2-甲基-2-丁烯与甲醇反应生成甲基叔戊基醚的反应历程进行了量子化学研究, 结果表明, 反应过程包括两个基元步骤: 2-甲基-1-丁烯和2-甲基-2-丁烯与氢离子作用生成碳正离子, 活化能分别为E1=2.26 kJ/mol, E2=7.72 kJ/mol; 甲醇与叔碳正离子反应成醚, 活化能为E3=1.29 kJ/mol, 碳正离子的生成是反应的速控步骤. 2-甲基-1-丁烯与2-甲基-2-丁烯相互转化的异构化活化能分别为E'1=4.40 kJ/mol, E'2=63.11 kJ/mol, 高于成醚的活化能, 反应体系不发生烯烃相互转化的异构化反应.     

1, 3-环己二烯与丙烯反应exo和endo机理的理论研究

采用从头算方法在3-21G基组上研究了1, 3-环己二烯与丙烯生成exo和endo产物的反应机理。该反应生成exo和endo产物各存在三条反应途径, 其中两条为分步途径, 一条为协同途径。经计算研究表明:1, 3-环己二烯与丙烯生成exo和endo产物的有利途径为经过一个双自由基中间体的分步过程, 由丙烯端位碳原子先进攻的分步过程最为容易。对应于该过程, 生成exo和endo产物的反应速控步骤的位垒值分别为80.69kJ/mol和75.58kJ/mol。表明生成endo产物的反应比生成exo产物的反应略为有利。     

钯催化氧化N—H键羰基化反应合成1,3,4⁃噁二唑⁃2(3H)⁃酮杂环化合物机理的理论研究

通过密度泛函理论(DFT)研究了钯催化氧化N—H键羰基化反应合成1,3,4-噁二唑-2(3H)-酮杂环化合物的反应机理. 计算结果表明, 这一反应的催化循环包含N1—H活化、 羰基插入、 N2—H活化和还原消除4个阶段. 反应首先通过协同金属化/去质子化机理活化N1—H键, 然后羰基插入Pd—N1键生成稳定的六元金属环中间体, 随后通过一步反应直接发生N2—H键活化, 最后还原消除. 其中, 羰基插入是整个催化循环的决速步骤, 能垒为102.0 kJ/mol. 研究了配体效应和取代基效应, 其结果与已有的实验结果一致.     

酸性分子筛催化乙烯二聚反应

应用密度泛函理论(DFT), 采用5T簇模型来模拟分子筛催化剂的酸性位, 在B3LYP/6-311+G(3df, 2p)的条件下通过理论计算研究了乙烯在酸性分子筛上的二聚反应. 对反应各驻点进行了全局优化, 经过零点能校正后, 计算得出乙烯二聚反应的活化能. 研究表明, 乙烯在分子筛上的二聚反应分三步进行: 单个乙烯分子化学吸附→第二个乙烯分子的物理吸附→两乙烯分子二聚反应. 乙烯化学吸附生成的烷氧化合物与物理吸附的乙烯分子发生二聚反应生成新的C—C键同时生成新的烷氧化合物. 计算得到的乙烯化学吸附和二聚反应的反应能垒分别为108和149 kJ·mol-1. 反应的逆过程也就是1-丁烯在酸性分子筛表面的1-丁基烷氧化合物发生β分裂反应, 计算所得相应的1-丁烯β分裂反应的能垒为217 kJ·mol-1, 远高于相应的乙烯二聚反应能垒. 此外还进一步研究了所用基组对计算结果的影响.     

分子内C—H键胺化反应机理的DFT研究

采用密度泛函理论研究了溴化亚铁催化芳基叠氮化物C—H键胺化生成苯并咪唑的反应机理.研究结果表明,溴化亚铁催化剂使反应由协同机理转变为分步机理,反应活化能降低了大约167kJ/mol.催化反应由氮气消去、C—N形成和2H-苯并咪唑异构化3个基元步骤组成.其中金属亚胺/金属氮烯FeNR PhNCPh进攻C形成C—N键是无能垒过程,且与金属氮烯中氮的电荷密切相关.氮气消去与2H-苯并咪唑异构化反应的能垒均在41~54kJ/mol之间.     

H-ZSM-5分子筛上环己烯芳构化反应历程的理论研究

基于76T簇模型,采用量子力学和分子力学联合的ONIOM2(B3LYP/6-31G(d,p):UFF)方法研究了H-ZSM-5分子筛上环己烯芳构化反应历程.结果表明,环己烯首先吸附在分子筛酸性位上,与酸性质子共同脱除一个H2分子后,在分子筛骨架氧上生成烷氧配合物中间体;然后再脱质子得到环己二烯,同时酸性位复原;再经历脱氢和脱质子历程,最后得到产物苯,并吸附在复原的分子筛酸性位上.计算得到脱氢的活化能依次为279.64和260.21kJ/mol,脱质子的活化能依次为74.64和59.14kJ/mol.所有脱氢反应都是吸热过程,生成表面烷氧活性中间体,随后的脱质子反应能垒较低,而且是放热过程.此外,比较了环己烯在分子筛酸性位上的三个竞争反应,即脱氢、质子化和氢交换反应的活化能垒,证明环己烯优先发生脱氢反应.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.