固相微萃取-气相色谱联用测定饮料中残留的10种可挥发性卤代烃

建立了固相微萃取(SPME)与气相色谱(GC)联用测定饮料中残留的可挥发性卤代烃(VHH)的检测方法.探讨了影响SPME萃取效果的纤维涂层、离子强度、萃取时间等因素,并对饮料样品的预处理进行了研究.方法的检出限0.3μg/L,线性范围3～90μg/L,回收率在79.5%～104.3%之间,RSD在1.3%～12%之间.     

三苄基杯[6]芳烃固相微萃取复合涂层的研制及其应用

采用溶胶-凝胶方法制备了三苄基杯[6]芳烃/羟基硅油(C[6]/OH-TSO)固相微萃取(SPME)探头, 通过对多环芳烃和酞酸酯(PAEs)的分析考察了新型C[6]/OH-TSO探头的性能. 结果表明: 杯[6]芳烃SPME探头对这些非极性和弱极性的芳香化合物有很好的萃取效果和选择性, 具有耐高温、使用寿命长等特点. 建立了SPME与气相色谱-氢火焰(GC-FID)联用测定化妆品中PAEs的方法. 该方法检测限低, 重现性好(RSD＜9%), 线性范围宽(2～3个数量级). 回收率在83.42%～98.85%之间.     

单羟基七元瓜环的固相微萃取纤维对环境水样中苯酚类物质的分析检测

以单羟基七元瓜环(Q[7]-OH)和端羟基聚二甲基硅氧烷(OH-PDMS)为固定相,利用溶胶-凝胶方法制备了PDMS/Q[7]-OH的固相微萃取纤维(SPME fiber)。建立了PDMS/Q[7]-OH SPME纤维-气相色谱(GC)/氢火焰离子化检测器(FID)对环境水样中5种苯酚类化合物同时检测的分析方法。实验结果表明5种酚类化合物的线性范围在0.5～5 000μg/L之间,相关系数均大于0.994 0。方法的检出限(LOD)在0.1～3.1μg/L范围内,富集倍数为6～104倍。三个加标浓度的平均相对回收率(n=3)在70.1%～113.7%范围内,日内及日间精密度的RSD在3.2%～9.9%之间(n=5, c=500μg/L)。方法灵敏、简便,可满足环境水样中苯酚类化合物同时测定的要求。     

顶空固相微萃取-气相色谱质谱联用测定烷基铅的研究

建立了顶空固相微萃取(HS SPME)与气相色谱 质谱(GC/MS)联用测定水样中四甲基铅和四乙基铅的方法,探讨了SPME萃取烷基铅的实验条件,并对GC/MS条件进行了优化。结果表明:四甲基铅和四乙基铅分别在5～1000ng/mL和1～500ng/mL范围内有良好的线性关系,检出限分别为四甲基铅5.19ng/mL,四乙基铅1.05ng/mL。方法用于合成水样分析,四甲基铅和四乙基铅的回收率在87.5%～110.6%之间,相对标准偏差在1.7%～6.5%之间。     

介孔涂层固相微萃取-高效液相色谱法测定水样中邻苯二羧酸酯化合物

以苯基官能化MCM-41介孔复合体作为固相微萃取(SPME)的吸附涂层, 与高效液相色谱(HPLC)联用测定了不同水样中邻苯二甲酸二甲酯(DMP)、邻苯二甲酸二乙酯(DEP)、邻苯二甲酸二丁酯(DBP)和邻苯二甲酸二辛酯(DOP)的含量, 对SPME的吸附和解吸时间、温度、搅拌速度进行了优化, 线性范围分别为1.19×10-4～119 μg/L、 1.12×10-4～112 μg/L、 1.05×10-4～105 μg/L和9.80×10-5～98 μg/L, 检出限依次为0.030、 0.027、 0.029和0.022 ng/L. 使用该方法测定了多种水样中邻苯二羧酸酯类化合物.     

固相微萃取-气相色谱法测定涂料中苯系物

采用固相微萃取(SPME)技术结合气相色谱法对涂料中的苯系物进行检测和分析,针对涂料中存在的主要污染物,对影响SPME的参数进行了优化.建立的方法在所测的范围内具有良好的线性(相关系数:0.9991～0.9996);检出限达0.05～0.60 μg/L;重复测定的相对标准偏差小于2.3%.     

镍钛合金表面离子液体掺杂聚苯基吡咯纤维涂层的制备及其对多氯联苯的高效固相微萃取

采用水热法和电沉积法在镍钛(NiTi)合金表面构筑1-丁基-3-甲基咪唑六氟磷酸盐离子液体(IL)掺杂聚苯基吡咯(PPPy)纤维涂层,成功制备了新型IL@PPPy-TiO_2/NiOCNSs固相微萃取(SPME)纤维。将该新型纤维与高效液相色谱(HPLC)联用,以多氯联苯(PCBs)、邻苯二甲酸酯(PAEs)、多环芳烃(PAHs)和紫外线(UV)吸收剂为模型分析物评价其萃取性能。结果显示,该纤维对PCBs有较强的萃取选择性和较高的萃取效率。在优化条件下,5种PCBs在一定质量浓度范围内呈良好线性,相关系数r≥0.998 6,检出限(LOD)为0.015～0.11μg/L。采用单支纤维在同日和隔日对50μg/L PCBs混合标准溶液进行萃取测定,相对标准偏差(RSD)分别为4.7%～6.1%和5.4%～7.0%,相同方法制备的5支纤维测定的RSD为6.5%～7.7%。实际水样的加标回收率为83.0%～104%,RSD不大于8.6%。所建立的SPME/HPLC法适用于不同环境水样中痕量PCBs的快速萃取和高效测定。     

固相微萃取-气相色谱-质谱联用分析环境水样中痕量有机磷农药

研究了固相微萃取(SPME) 气相色谱 质谱联用(GC MS)同时测定环境水样中二嗪农、甲基对硫磷、对硫磷和水胺硫磷4种有机磷农药(OPPs)的分析方法。选择聚丙烯酸酯(PA)萃取纤维,对SPME的条件如萃取时间、萃取溶液的pH值和离子强度、解吸温度、解吸时间和GC MS的条件进行了优化。对二嗪农和水胺硫磷方法线性范围为0.001～10μg L,对甲基对硫磷和对硫磷方法线性范围为0.001～100μg L。二嗪农、甲基对硫磷、对硫磷、水胺硫磷的检出限分别为0.015,0.020,0.013和0.039μg L。分析加标自来水、矿泉水和湖水样品,回收率在89.0%～102%之间,RSD在2.1%～14.1%之间。适合于环境水样中痕量OPPs的快速分析。     

顶空固相微萃取-气相法测定酒中的甲醇和杂醇油

 采用环氧树脂作为固相涂层制作固相微萃取 (SPME)装置 ,建立了顶空固相微萃取 气相法 (HS SPME GC)测定酒精饮料中甲醇和杂醇油的方法 ,并对萃取条件和条件进行了优化。方法的检出限为 0 0 2mg/L～0 0 4mg/L ,相对标准偏差为 1 4 %～ 4 1% ;与顶空气相法相比 ,灵敏度可提高 2 0倍～ 30 0倍。将该法用于啤酒、葡萄酒和保健酒中的甲醇和杂醇油的测定 ,加标回收率为 80 8%～ 110 3% ;与顶空气相法 (国家标准方法 )进行了比较 ,相对误差不大于 7 3%。该法简便、快速、灵敏、精密度好 ,拓宽了SPME的应用范围。     

有机硅改性聚酰亚胺固相微萃取涂层的制备及其应用

以N,N-二甲基甲酰胺为溶剂,用3,3′,4,4′-二苯甲酮四羧酸二酐、4,4′-二氨基二苯醚及1,3-双(3-氨基丙基)-1,1,3,3-四甲基二硅氧烷合成了有机硅改性的聚酰亚胺作为固相微萃取(SPME)中基质(石英纤维)的涂层材料。通过红外光谱法、热重法及扫描电子显微镜对此涂层的结构、热稳定性和表面形貌进行了分析,证明了通过聚合反应将有机硅链段引入到聚酰亚胺结构中可增加链的柔韧性,减少分子链间的极性作用,改善其吸附性能,而且经高温脱水反应使涂层键合在石英纤维表面,使其性质稳定,不易脱落。将有此涂层的SPME应用于气相色谱法测定水中7种苯系物,取得良好的分离效果,7种苯系物测定值的相对标准偏差(n=6)在4.1%~6.0%之间,检出限(3S/N)在0.02~0.11mg·L-1之间,回收率在98.0%~117%之间。     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.