大分子单体及其规整接枝共聚物

论述了通过活性阴离子聚合、活性阳离子聚合、基团转移聚合、自由基聚合、缩聚等途径合成各种大分子单体,论讨了大分子单体的表征,并结合自己的工作综合介绍近年来大分子单体共聚的进展及其规整接枝共聚物的纯化和特性。     

聚苯乙烯/有机硅共聚合的研究进展

介绍聚苯乙烯 有机硅嵌段和接枝共聚物不同的合成方法 ,包括阴离子聚合、大分子单体、活性自由基聚合、原子自由基聚合等 ,并对其研究前景做了展望     

聚苯乙烯-甲基丙烯酸甲酯接枝共聚物的合成和表征

<正> 聚苯乙烯(PS)和聚甲基丙烯酸甲酯(PMMA)都是研究得十分深入的聚合物。它们的接枝共聚物,虽然在基础研究中是十分有兴趣的对象,但因传统的合成方法不能得到结构确定的产物,同时难于与伴生的均聚物分离,进展不大。近年来随着大分子单体方法和极性单体活性阴离子聚合的发展,具有确定结构的接枝共聚物PS-g-PMMA的合成逐步成为可能。例如:Ishizu采用阴离子聚合合成带乙烯基的PMMA大分子单体,再与苯乙烯自由基共聚的路线,Ballegoole等和Watanable分别采用主干接枝法,即用自     

活性阴离子聚合及其单体的研究进展

适用于活性阴离子聚合的单体拓展研究是有关活性阴离子聚合的一项重要的研究工作.本文重点介绍了近十年在活性阴离子聚合领域出现的新型单体的结构设计、合成及其聚合过程的研究进展.文中涉及到的新型单体主要包括非(弱)极性类单体、极性单体及其它单体.进一步细分,非(弱)极性类单体分为苯乙烯衍生物类单体和丁二烯衍生物类单体,极性单体中含有丙烯酸酯类单体、丙烯酰胺类单体、氯乙烯以及N-乙烯基咔唑,其它单体包括异氰酸酯类、烯酮类以及杂环类单体.最后本文对上述这些新型单体中的一些单体用于复杂大分子拓扑结构的设计合成情况也作了简要介绍.     

降冰片烯端基聚苯乙烯大分子单体的合成

近年来,大分子单体的合成及其共(自)聚合正日渐成为高分子合成中非常活跃的领域。本试验室曾合成了具有烯丙基端基的聚苯乙烯大分子单体(PS-allyl),并将其与乙烯、丙烯共聚合得到了乙丙共聚物(EPR)为主干、聚苯乙烯(PS)为支链的接校共聚物EPR-g-PS。本工作以5-溴甲基-2-降冰片烯(BrMNB)与聚苯乙烯阴离子(PS^-)偶合,制备具有降冰片烯端基的聚苯乙烯大分子单体(PS-NB)。     

Lewis酸碱对催化的可再生环状缩醛酯单体的开环聚合研究

从生物质原料3,4-二氢吡喃出发，合成了可再生环状缩醛酯单体(H-AE)，从结构上看，该单体在γ-丁内酯中引入了缩醛单元，在开环聚合过程中，通过释放甲醛分子有希望在温和条件下得到聚(γ-丁内酯).选用合适的Lewis酸碱对催化剂，基本抑制了聚合过程中的链回咬副反应，实现了单体的可控聚合.详细研究了催化剂的酸/碱性强度及其位阻大小对于合成的聚合物的组成和比例的影响，通过设计和优化催化剂的结构，实现了聚合物中聚丁内酯单元和聚缩醛酯单元比例的调控.对所得聚合物进行了1H-NMR、13C-NMR及扩散排序核磁共振(DOSY)表征，结合聚合过程的核磁与SEC监测，证实所得聚合物为丁内酯与缩醛酯的无规共聚物.根据实验数据和表征结果，推测聚合遵循Lewis酸碱对调控的阴离子开环聚合机理，酸碱催化剂共同稳定活性链末端，实现了亲核进攻和甲醛的脱除.     

大分子单体聚N-乙烯甲酰胺与苯乙烯共聚合成热敏性功能高分子微球

用自由基聚合法合成了大分子单体聚N 乙烯甲酰胺和功能高分子微球 .用GPC、分光光度仪和扫描电子显微镜等对合成的聚合物进行了表征 .研究结果表明 ,大分子单体聚N 乙烯甲酰胺和功能高分子微球具有明显的热敏性特性 ,且合成的功能高分子微球具有单分散性 ,粒径在 1～ 5 μm之间     

梳形接枝共聚物的合成(Ⅱ)——载体化钌卡宾络合物催化降冰片烯基聚苯乙烯的开环岐化聚合

由石油化工副产C₅馏份提取双环戊二烯(DCPD)、以聚合物负载三氟化硼为催化剂进行DCPD与烯丙基氯(AC)的Diels-Alder反应合成5-氯甲基-2-降冰片烯(NBCH₂Cl),经锂代反应后用以引发苯乙烯的活性阴离子聚合合成了降冰片烯(NB)基聚苯乙烯(PS)大分子环烯单体NB-PS,在聚合物负载钌卡宾络合物[RuCl₂(PPh₃)₂(=C=CHtBu)]催化(引发)作用下进行大分子单体NB-PS的开环歧化聚合(ROMP)合成了梳形接枝共聚物PNB-g-PS.实验结果表明所合成聚合物负载硼、钌络合物催化剂的性能均明显优于对应非负载体.讨论了上述催化剂的聚合物载体效应的机理及温度、溶剂等对活性阴离子聚合反应的影响.     

EPR-g-PS接枝共聚物的大分子单体共聚物合成及表征

将阴离子聚合所得末端带有烯丙基的窄分布聚苯乙烯大分子单体(PSallyl)与乙烯、丙烯在钒催化体系下进行共聚合,得到聚苯乙烯(PS)支链沿乙丙橡胶(EPR)主干无规分布的接枝共聚物EPR-g-PS。接枝效率为70％左右。大分子单体的分子量、加入量,催化剂浓度和聚合温度等对共聚反应及其产物结构有明显的影响。丁酮为选择沉淀剂可分离未反应的聚苯乙烯大分子单体。用紫外光谱、核磁共振、渗透压和凝胶渗透色谱法测定了纯制接枝共聚物的组成和分子量。结果表明所合成的EPR-g-PS的聚苯乙烯含量为5—45％;支链为分子量1.0—7.8×10~4的窄分布((?)=1.05—1.17)聚苯乙烯;平均支链数为1—4。     

氧阴离子引发甲基丙烯酸-2-(N,N-二甲氨基)乙酯聚合制备Y型大分子单体

氧阴离子聚合(Oxyanion－initiated Polymerization)是一类新型的聚合方法[‘,’‘．利用个乙烯基苦醇钾作为功能性引发剂,引发甲基丙烯酸－2－(NJ－二乙氨基)乙酯聚合,形成末端带可聚合官能团的大分子单体‘”“．氧阴离子引发剂通常难以引发甲基丙烯酸烷基酯单体聚合,但却能引发甲基丙烯酸氨基酯类单体发生聚合．由于氨基乙酯基7位上氮原子的供电子性,它能与钾离子形成螫合物,使氧阴离子的亲核性增加,从而更具有活性,引发单体聚合．氧阴离子聚合具有速度快、活性高、反应温度接近室温和产物的单分散性好等特点．尽管目前还不清楚这种反…     

Synthesis of End-Reactive Polymers with Controlled Molecular Weight by Metalloporphyrin Catalyst

α, β, γ δ-Tetraphenylporphinatoaluminum carboxylate (TPPA10COR) and phenoxide (TPPA10Ar) bring about the polymerization of β-lactone and epoxide to give polymers with controlled chain length having a carboxylic ester or phenoxy group at the end of each polymer molecule. Acrylate (TPPA10COCH=CH2) and p-vinylphenoxide (TPPA1-OC₆H₄,CH[dbnd]CH₂ (p)) as initiator give polyester or polyether macromer with narrow molecular weight distribution.     

Synthesis,Characterization, and Conductivities of Poly(2-Vinylpyridine)-graft-Polyoxyethylene Using a Macromer Technique

Abstract

Poly(2-vinylpyridine) (P2-VP) with uniform polyoxyethylene (PEO) grafts was synthesized using a macromer technique. 2-Vinylpyridine was copolymerized with PEO macromer in solution by using azobisisobutyronitrile (AIBN) as the initiator. The effects of the amount of AIBN, the concentrations of 2-vinylpyridine and macromer, the number average molecular weight of macromer, and the charging ratio of macromer to 2-vinylpyridine in the copolymerization were studied. The copolymerization rate of the PEO macromer with 2-vinylpyridine was also investigated. The grafting efficiency reached about 56%. The crude graft copolymer was purified by extraction and precipitation, and it was characterized by IR, ¹H-NMR, and Bruss membrane osmometry. The PEO grafts were doped with LiClO₄ and showed ionic conductivity around 4.10 × 10^?6S°Cm^?1 at 25°C whereas the P2-VP main chains were complexed with TCNQ to obtain electronic conductivity around 5.50 × 10^?6 S°Cm^?1 at 25°C The mixed (ionic and electronic) conductivity of the doped copolymer could reach about 5.40 × 10^?5 S°Cm^?1 at 25°C and showed a synergistic effect.     

SYNTHESIS OF POLYACRYLAMIDE WITH PENDANT POLY(BUTYL ACRYLATE) CHAINS USING THE MACROMER TECHNIQUE AND STUDIES ON THEIR PROPERTIES

INTRODUCTIONSince Milkovich and Chiang[1] developed a method of preparing copolymers with uniform side chains by usingthe macromer technique, the synthesis of copolymers with uniform side chains from different macromers hasbeen studied extensively. Milkovich et al. reported the synthesis of polystyrene macromer through termination ofliving polystyrene anions with methacryloyl chloride and its copolymerization with butyl acrylate to formthermoplastic elastomer[2]. Rempp[3] obtained polyoxy…     

Preparation and characterization of hydrogels based on acryloyl end-capped four-arm star-shaped poly(ethylene glycol)-branched-oligo(<Emphasis Type="SmallCaps">l</Emphasis>-lactide) via Michael-type addition reaction

An acryloyl end-capped four-arm star-shaped poly(ethylene glycol)-branched-oligo(l-lactide) (4A-PEG-PLA) macromer was firstly prepared. A novel kind of hydrogels was synthesized via the Michael-type addition reaction between (2S,3S)-1,4-bis-sulfanylbutane-2,3-diol (dithiothreitol) and this macromer. Gelation time was determined visually as the time when the precursor solution did not flow on inverting the vials. Hydrogel structure was characterized by FTIR analysis, swelling and degradation tests. It was found that colorless and transparent hydrogels were quickly generated in situ. The gelation time, swelling and degradation behaviors of this kind of hydrogels could be adjusted by changing the concentration of the macromer solution in PBS buffer (pH 7.4). This novel hydrogel is expected to be used as a biomedical material.     

Ring-opening copolymerization of epoxy-terminated polystyrene macromer with epichlorohydrin and study on properties of the copolymers

The synthesis and ring-opening copolymerization of epoxy-terminated polystyrene (PS-ep) macromer with epichlorohydrin (ECH) as well as some properties of the graft copolymers, were studied. The results showed that content of the epoxy-terminated macromer in the crude macromer can be increased by anionic polymerization of styrene in cyclohexane, and capping with propylene sulfide, followed by termination with ECH at 0 °C. The ring-opening copolymerization of ECH with the macromer can be performed by using a quaternary catalyst system which was composed of triisobutyl aluminium-phosphoric acid-water-amine in the molar ratio of 1:0.25:0.25:0.1-0.15. When the charging weight percentage of PS-ep/ECH=25-65% and M_n of PS-ep was 2.6-10×10³, the conversion of ECH was greater than 95% and the conversion of the macromer or grafting efficiency was 35-65%. The purified copolymer was characterized by IR, ¹H NMR and dynamic viscoelastometer to be a copolymer of ECH with polystyrene (PS) grafts. Transmission electron microscope showed the existence of PS domains in the continuous phase of polyepichlorohydrin (PECH). In a certain range of compositions the graft copolymer behaves like a thermoplastic elastomer. The graft copolymer can be melted and processed repeatedly. Its oil and solvent resistance were better than PS and similar to PECH rubber. The graft copolymer can be used as a compatibilizer for blending PECH with PS to form thermoplastic elastomer blends. Only 2% of it based on the blend is needed to raise the tensile strength of the blends obviously.     

通过自由基反应合成聚甲基丙烯酸甲酯大分子单体

大分子单体是一类具有聚合反应活性的聚合物,分子量在几千到数万不等,聚合反应活性点一般是大分子的端基,聚苯乙烯大分子单体是此类化合物的一种［１,２］．若改变聚合物化学结构（ａ）,可制成具有不同性能的大分子单体;若改变端基（ｂ）,则可使大分子单体具有不同...     

自由基引发的可注射PLA-b-PEG-b-PLA大分子单体和α-CD超分子结构水凝胶的合成与表征

以数均分子量为6000的聚乙二醇为引发剂,以辛酸亚锡为催化剂引发丙交酯开环,再用甲基丙烯酸酐进行封端生成大分子单体.然后将大分子单体和α-环糊精混合,分别用维生素C和硫酸亚铁与过硫酸铵组成的氧化还原引发剂引发聚合,得到了两种不同结构的超分子结构水凝胶.用1HNMR,FTIR,TGA和XRD等分析测试手段对大分子单体及形成的水凝胶进行了表征.流变仪测试结果表明,该水凝胶固化时间合适,并具有可注射性.     

丙烯酰胺-二氰二胺大单体及其与苯乙烯共聚物的研究(Ⅰ)——大单体及其共聚物的合成和表征

通过丙烯酰胺、二氰二胺、甲醛及氯化铵的缩合反应,合成了分子链端含C=C双键的大单体,缩合过程用高压液相色谱考察,以AIBN为引发剂,二甲基亚砜为溶剂,使大单体与苯乙烯共聚,得到主链具有疏水性、侧链具有亲水性的共聚物,用GPC、IR光谱及溶解性对共聚物进行鉴定,苯乙烯含量较低时,共聚物溶于水,共聚物在MeOH/H₂O混合溶剂中的粘性行为表明它是带有疏水基团的聚电解质。     

Copolymerization of Polymethyl Methacrylate Macromers with n-Butyl Acrylate and Mechanical Properties of the Graft Copolymers

The copolymerization of polymethyl methacrylate (PMMA) macromer with butyl acrylate in benzene was studied. the PMMA macromer was obtained by radical polymerization in the presence of thioglycollic acid as a chain transfer agent, followed by termination with glycidyl methacrylate. the copolymerization rate and effects of various copolymerization conditions, such as molecular weight of macromer, charging ratio of macromer to monomer, amount of initiator, kind of solvent, concentration, and copolymerization temperature, on grafting efficiency and molecular weight of copolymer were investigated. the copolymers were purified by fractional precipitation. the purified copolymers with uniform PMMA grafts were characterized by GPC, IR, UV, and DSC. Structural parameters of the copolymers were determined by VPO and membrane osmometry. Average grafting number per chain decreases with an increase of conversion. Measurement of mechanical properties of the copolymers shows that both molecular weight and the content of the macromer affect mechanical properties of the copolymer, and within a certain range they behave like a thermoplastic elastomer.     

聚苯乙烯大分子单体与醋酸乙烯酯接枝共聚物的合成及表征

<正> 用大分子单体与小分子单体共聚是七十年代初才出现的合成接枝共聚物的一种新方法。通过共聚合反应而不是接枝反应同时形成主干及支链。这种接枝共聚物由于形成支链的大分子单体是预先合成的,其分子量分布较窄,又可调节控制,所以合成的接枝共聚物支链长短比较均一,副反应较少,链结构比较明确,因此也易于表征。