基于正离子聚合方法设计合成接枝共聚物的研究进展

综述了基于可控/活性正离子聚合方法及通过接出接枝(grafting from)、接出接枝(grafting onto)和大分子单体(macromonomer)三种合成策略来设计制备接枝共聚物的研究进展,详细概括了大分子引发剂结构、支链结构、大分子单体结构、大分子链上引发活性点以及官能基团的分布、支链长度及路易斯酸性质等因素对接枝共聚反应的影响规律和不同接枝共聚物的设计合成,总结了上述三种不同合成路径的各自特点,进一步阐述所制备的接枝共聚物在特定环境中的微观结构、形态与外界条件响应性,探讨接枝共聚物的潜在应用领域。     

PU大分子单体水溶液性质

双亲聚合物一般由亲水和亲油 2种链段构成 ,有嵌段型[1,2 ] 和接枝型[3 ] 2种 ,其中通过大分子单体法合成双亲接枝聚合物备受关注[4] 。如以亲水性大分子单体和亲油性小分子单体共聚 ,大分子单体构成共聚物主链上支链 ,具有较大活动性 ,亲水效能高。采用对氯甲基苯乙烯[5] 或甲基丙烯酰氯[6] 与聚氧化乙烯大分子的一端相反应 ,可得到亲水性大分子单体 ,但其分子量及结构变化有限。本文采用常规条件 ,合成了嵌段式水溶性聚氨酯大分子单体 ,其分子量较大 ,共聚接枝的支链较长。利用该大分子单体具有非离子高分子表面活性剂的性质 ,采用无皂乳…     

降冰片烯封端的聚苯乙烯大分子单体与乙烯共聚的初步报告

大分子单体(macromer)共聚合为合成结构确定的接枝共聚物提供了新途径,但用络合催化剂进行共聚的例子很少。前文报导了末端为降冰片烯(NB)的聚苯乙烯大分子单体PS-NB的合成及表征;现报告其与乙烯的共聚,以制备主干为聚乙烯(PE)、支链为聚苯乙烯(PS)的接枝共聚物PE-g-PS的初步结果。     

EPR-g-PS接枝共聚物的大分子单体共聚物合成及表征

将阴离子聚合所得末端带有烯丙基的窄分布聚苯乙烯大分子单体(PSallyl)与乙烯、丙烯在钒催化体系下进行共聚合,得到聚苯乙烯(PS)支链沿乙丙橡胶(EPR)主干无规分布的接枝共聚物EPR-g-PS。接枝效率为70％左右。大分子单体的分子量、加入量,催化剂浓度和聚合温度等对共聚反应及其产物结构有明显的影响。丁酮为选择沉淀剂可分离未反应的聚苯乙烯大分子单体。用紫外光谱、核磁共振、渗透压和凝胶渗透色谱法测定了纯制接枝共聚物的组成和分子量。结果表明所合成的EPR-g-PS的聚苯乙烯含量为5—45％;支链为分子量1.0—7.8×10~4的窄分布((?)=1.05—1.17)聚苯乙烯;平均支链数为1—4。     

羧酸型接枝共聚物的合成及其络合物做化学阀

用大单体技术合成了带规整聚苯乙烯支链的聚丙烯酸接枝共聚物 .研究了各种聚合条件包括温度、时间、单体浓度、大单体分子量及大单体与小单体的投料比等对接枝效率、共聚物分子量的影响 .纯化的共聚物表现出良好的乳化性质及高吸水率 ,在稀溶液中的行为如同聚电解质 .此接枝共聚物与含规整聚氧乙烯支链的聚丙烯酸乙酯络合生成的大分子间络合物膜呈现化学阀的作用 ,水通过它的渗透速率能通过调节pH加以可逆地控制 .     

碳链接枝共聚物——Ⅲ.聚丙烯酰胺的均相氧化及其与苯乙烯接枝共聚反应

不久前我们曾报导了聚丙烯酰胺的水溶液在室温或55℃时有可能与过氧化氢发生均相氧化反应,形成聚丙烯酰胺大分子过氧化物.这种水溶性的聚丙烯酰胺大分子过氧化物可引发烯类单体的接枝共聚,得到相应的碳链接枝共聚物。利用这种简便的接枝方法不仅可以合成一系列具有综合性能的接枝共聚物新品种,而且对大分子过氧化物引发烯类单体接枝共聚反应历程的研究也具有一定意义。     

利用大分子单体技术合成接枝共聚物

大分子单体和小分子共单体共聚是合成接枝共聚物的重要途径之一。本文综述了大分子单体通过各种聚合方式(自由基共聚、离子型共聚、配位共聚、基团转移共聚和逐步共聚)和普通小分子单体的共聚反应,详细讨论了大分子单体和小分子单体的自由基共聚反应动力学,并简要介绍了接枝共聚物的应用背景。     

含氟两亲接枝共聚物的制备及其结晶行为

采用大分子单体技术合成了一系列以聚乙二醇为支链、甲基丙烯酸六氟丁酯为主链的含氟两亲接枝共聚物(PHFMA-g-PSPEG)。用1HNMR和凝胶色谱(GPC)对制备的大分子单体和两亲接枝共聚物的结构进行了表征。利用示差扫描量热法(DSC)、X射线衍射(XRD)和偏光显微镜(POM)测试技术对含氟两亲接枝共聚物的结晶行为进行了研究。DSC和XRD结果表明,随着共聚物中含氟链段质量分数的增加,其结晶温度(Tc)和结晶度(Xc)均降低,而结晶熔融温度(Tm)先减小后增加。POM发现,随着共聚物中含氟链段质量分数的增加,其结晶速度减慢,共聚物形成清晰球晶的能力减弱,当共聚物中含氟链段质量分数为57%时,含氟两亲接枝共聚物已不能形成清晰的球晶。     

聚四氢呋喃/聚苯乙烯交联嵌段及接枝共聚物的合成与阻尼性能

合成接枝共聚物和嵌段共聚物是研究阻尼材料的重要途径,这是由于可以在较广的范围内,调整共聚物的结构,使之具有良好的阻尼性能。这里我们选择了端羟基聚四氢呋喃与顺丁烯二酸酐反应,制成端乙烯基大分子单体及端乙烯基遥爪低聚物。然后与苯乙烯共聚,制成接枝共聚物和嵌段共聚物。从两者的比较中探讨各种因素对共聚物阻尼性能的影响规律。认为研究结果将有益于阻尼材料的分子设计,在反应体系及合成方法上,都比较简便,适于工业生产,便于推广应用。     

PLA大分子单体接枝NVP共聚物的合成与性能

制备了末端为双键的功能化聚乳酸大分子单体(PLA-HEMA),并以此大分子单体与N-乙烯基吡咯烷酮(NVP)进行自由基溶液共聚,合成了具有亲水性PVP-PHEMA主链和疏水性PLA支链的接枝共聚物。用FT-IR1、H-NMR、GPC、DSC、表面接触角测定研究了共聚物的结构与性能。结果表明:共聚物为非晶聚合物;NVP的摩尔投料量对共聚物的性能有显著影响,随NVP投料量增大,共聚物的分子量有所下降,玻璃化转变温度(Tg)增大;由于亲水性PVP和PHEMA链段的引入,共聚物的亲水性优于相应的线型聚乳酸材料。     

聚苯乙烯大单体与乙酸乙烯酯的共聚及其接枝共聚物的表征

研究了聚苯乙烯大单体与乙酸乙烯酯的溶液聚合,结果表明,接枝效率随引发剂用量、聚合温度及小单体与大单体的投料比的增加而增加,随大单体的分子量增加而减少,而随单体浓度的变化呈现一最大值。共聚过程中大单体的转化率开始较小单体的增加快,后期变慢。用萃取法纯化的接枝共聚物经GPC、IR、~1H-NMR及PGC等表征,并算得平均接枝数为4—7。透射电镜表明接枝共聚物中存在微观相分离。     

聚苯乙烯大单体与乙酸乙烯酯的共聚及其接枝共聚物的表征

 研究了聚苯乙烯大单体与乙酸乙烯酯的溶液聚合,结果表明,接枝效率随引发剂用量、聚合温度及小单体与大单体的投料比的增加而增加,随大单体的分子量增加而减少,而随单体浓度的变化呈现一最大值。共聚过程中大单体的转化率开始较小单体的增加快,后期变慢。用萃取法纯化的接枝共聚物经GPC、IR、¹H-NMR及PGC等表征,并算得平均接枝数为4—7。透射电镜表明接枝共聚物中存在微观相分离。     

丙烯酰胺-二氰二胺大单体及其与苯乙烯共聚物的研究(Ⅰ)——大单体及其共聚物的合成和表征

通过丙烯酰胺、二氰二胺、甲醛及氯化铵的缩合反应,合成了分子链端含C=C双键的大单体,缩合过程用高压液相色谱考察,以AIBN为引发剂,二甲基亚砜为溶剂,使大单体与苯乙烯共聚,得到主链具有疏水性、侧链具有亲水性的共聚物,用GPC、IR光谱及溶解性对共聚物进行鉴定,苯乙烯含量较低时,共聚物溶于水,共聚物在MeOH/H₂O混合溶剂中的粘性行为表明它是带有疏水基团的聚电解质。     

Synthesis, Purification and Characterization of Amphiphilic and Microphase Separated Graft Copolymer Polystyrene-g-Poly(ethylene oxide)

The present paper covers the poly (ethylene oxide) macromer with vinyl benzyl terminal group (PEO-VB) prepared by deactivation of the alkoxide function of mono-functional "living" PEO chains with vinyl benzyl chloride (VBC). The obtained macromers were subjected to careful purification and detailed characterization. A new kind of amphiphilic polystyrene-g-poly(ethylene oxide) (PS-g-PEO) with both mi-crophase separated and PEO side chains was synthesized from radical copolymerization of PEO-VB macromer with styrene monomer. An improved purification method, referred as "selective dissolvation", was established for the isolation of graft copolymers from the grafting products, and the purity and yield of the purified copolymers were satisfactory. The well-defined structure of the purified copolymers was confirmed by IR, 1H NMR and GPC. The bulk composition of the graft copolymers was determined by a well-established first derivative UV spectrometry. Various experimental parameters controlling the copolymeri     

SYNTHESIS OF POLYACRYLAMIDE WITH PENDANT POLY(BUTYL ACRYLATE) CHAINS USING THE MACROMER TECHNIQUE AND STUDIES ON THEIR PROPERTIES

INTRODUCTIONSince Milkovich and Chiang[1] developed a method of preparing copolymers with uniform side chains by usingthe macromer technique, the synthesis of copolymers with uniform side chains from different macromers hasbeen studied extensively. Milkovich et al. reported the synthesis of polystyrene macromer through termination ofliving polystyrene anions with methacryloyl chloride and its copolymerization with butyl acrylate to formthermoplastic elastomer[2]. Rempp[3] obtained polyoxy…     

Ring-opening copolymerization of epoxy-terminated polystyrene macromer with epichlorohydrin and study on properties of the copolymers

The synthesis and ring-opening copolymerization of epoxy-terminated polystyrene (PS-ep) macromer with epichlorohydrin (ECH) as well as some properties of the graft copolymers, were studied. The results showed that content of the epoxy-terminated macromer in the crude macromer can be increased by anionic polymerization of styrene in cyclohexane, and capping with propylene sulfide, followed by termination with ECH at 0 °C. The ring-opening copolymerization of ECH with the macromer can be performed by using a quaternary catalyst system which was composed of triisobutyl aluminium-phosphoric acid-water-amine in the molar ratio of 1:0.25:0.25:0.1-0.15. When the charging weight percentage of PS-ep/ECH=25-65% and M_n of PS-ep was 2.6-10×10³, the conversion of ECH was greater than 95% and the conversion of the macromer or grafting efficiency was 35-65%. The purified copolymer was characterized by IR, ¹H NMR and dynamic viscoelastometer to be a copolymer of ECH with polystyrene (PS) grafts. Transmission electron microscope showed the existence of PS domains in the continuous phase of polyepichlorohydrin (PECH). In a certain range of compositions the graft copolymer behaves like a thermoplastic elastomer. The graft copolymer can be melted and processed repeatedly. Its oil and solvent resistance were better than PS and similar to PECH rubber. The graft copolymer can be used as a compatibilizer for blending PECH with PS to form thermoplastic elastomer blends. Only 2% of it based on the blend is needed to raise the tensile strength of the blends obviously.     

Studies of the polymerization of diallyl compounds. XII. Cyclocopolymerization of dimethallyl phthalate with vinyl acetate

Dimethallyl phthalate was copolymerized with vinyl acetate at 60°C with the use of benzoyl peroxide as an initiator. The rate and degree of copolymerization increased with an increase in the mole fraction of vinyl acetate. The residual unsaturation of the copolymer was nearly constant, regardless of the feed molar ratio. The monomer reactivity ratios (MRR) were obtained on the basis of the copolymer composition equation in which the intramolecular cyclization reaction was considered: γ₁ = 1.08 (MRR of the uncyclized radical), γ₂ = 0.99 (MRR of vinyl acetate radical), γ_c = 0.73 (MRR of the cyclized radical). The difference between γ₁ and γ_c is discussed.     

Monomer reactivity ratios in graft copolymerization

This paper discusses monomer reactivity ratios in various radiation- and redox-initiated graft copolymerizations. The polymers studied were polyethylene, cellulose acetate, poly(vinyl chloride), polytetrafluoroethylene, poly(vinyl alcohol), and poly(methyl methacrylate); the comonomer mixtures were styrene–acrylonitrile, methyl acrylate–styrene, acrylonitrile–methyl acrylate, and vinyl acetate–acrylonitrile. The polymer–comonomer mixture systems were so chosen as to permit study of both homogeneous and heterogeneous systems. The homogeneous systems included systems of low and high viscosity. The heterogeneous systems included both polymers swollen by the comonomer mixture and polymers not swollen by the comonomer mixture. None of the homogeneous grafting systems studied showed deviations from the normal copolymerization behavior under a variety of experimental conditions. Monomer reactivity ratios in graft copolymerization were the same as the values in nongraft copolymerization. The heterogeneous systems in which the polymer was swollen by the comonomer mixture yielded grafted copolymer compositions which were the same as those in nongraft copolymerization. The heterogeneous grafting system polytetrafluoroethylene/styrene–acrylonitrile showed deviations from normal copolymerization behavior at low degrees of grafting when the reaction was only on the polymer surface. The behavior became normal at higher degrees of grafting when the system approaches that in which the polymer is swollen by the comonomers. In all reaction systems, it was found that the use of radiation to initiate the reaction does not in any way affect the copolymerization behavior of the two monomers in a comonomer pair.     

阳离子聚合合成聚苯乙烯大分子单体

<正> 近十年来,对大分子单体的合成和表征进行了较广泛的研究,其中尤以聚苯乙烯大分子单体研究得更多。Milkovich等用阴离子聚合合成了一系列具有不同端基的大分子单体。本文采用实验要求比阴离子简单的阳离子聚合方法,用对-氯甲基-β-溴乙苯和三