TPSR STUDIES OF THE ACTIVATION OF METHANE ON SUPPORTED PLATINUM CATALYSTS

1yttroductionIMcthancactivationisoncofthemostintriguingsubjectsinheterogencouscatal}'sisbccauscmcthancisathcrmod}namicall}'stabIccompoundt`ithanoblcgas-likeconfiguration.0fintcrcstsisthcrcccntt"orkreportcdb}'KocrtsIll,BeIguedl21.andYanl3ltthosucccssfull}'convcrtnaturalgasintohighcrh}.drocarbonsb}'thctt"o-stcproutcinwhichnaturalgasisfirstthcrmall}'activatcdonthctransitionmctalcatal}.stsatmoderatctemperature.Toasccrtainthcnaturcofrcactionsofmcthane.thcactivationofmcthaneisextensivel)'invcstiga…     

STUDY ON THE OXIDATIVE COUPLING OF METHANE III.CATALYTIC PERFORMANCE OF TiO2-BASED CATALYSTS STUDIED BY CO2-TPD AND TPR-TPO

The effects of surface acidity-basicity and surface oxidation reduction property of Li-La-Mn/TiO2 (I) and Li-La-Mn-W/TiO2 (II) catalysts on oxidative coupling of methane were studied by CO2-temperature programmed desorption (CO2-TPD) and temperature programmed reduction temperature programmed oxidation (TPR-TPO). The results show that there exist strong basic sites on catalysts I and II, but the quantity of these sites on catalyst II is more than that on catalyst I. Besides, the strength of basics site on catalyst II is stronger than that on catalyst I. The surface of catalyst II is easier to reduce and re-oxidize than that of catalyst I. The surface of catalyst II is easier to reduce and re-oxidize than of catalyst I, and the extent of reduction and reoxidation of catalyst II is more intensive than catalyst I, which results in a lowing of the reaction temperature and enhances the activity and C2 hydrocarbon yield as well as gas hourly space velocity(GHSV). Catalyst II is excellent for the oxidative coupling of methane (OCM).     

担载型过渡金属催化剂上甲烷和乙烯的同系化反应

利用程序升温脉冲反应技术较系统地考察了担载型过渡金属催化剂上甲烷与乙烯同系聚合制丙烯和丙烷的反应，通过分步反应，即首先进行甲烷分解，然后引入了乙烯与甲烷分解产生的表面碳物种反应，可以克服甲烷与乙烯同系聚合物反应的动力学限制，使该反应能在较为温和的条件下进行，还系统地探讨了影响该反应的各种因素，结果表明，Ｐｔ，Ｃｏ催化剂表现出较为优越的催化性能。     

STUDIES OF TPSR AND PULSE REACTION OF METHYL IODIDE ON SILICA-SUPPORTED NOBLE METAL CATALYSTS

IntroductionAttcn1ptstoclucidatcthcmcchanismofCtOh}drogcnationontransitionmctalcatal\stsbyusingprobcmoIcculcscanbctraccdbacktoatlcastascarl}'asl95ll]lAlthoughthistcchniqucisanindircctx"a}'ofstud}'ingsurfaccrcactionmcchanisms.itallot"sustostud}'inslIusurfaccrcactionsundcrccrtainconditionsx"hichusualI}'cannotbcprobcdb}'morcdirectinstrumcntalmcthodssuchassurfaccspcctrosc0pictcchniqucsOfintcrcstisthcreccntt"orkrcp0rtcdb}'Bclgucdl2l'KocrtsI3jandYa.l4j\"hoachict'cdthcconvcrsionofmethanctotbrmC2~…     

碱土金属对ZrO2-Al2O3及其负载Pd-Rh密偶催化剂的影响

采用胶溶法制备了一系列碱土金属改性的ZrO₂-Al₂O₃, 并以其为载体采用等体积浸渍法制备了Pd-Rh密偶催化剂. 采用低温N₂吸附-脱附、X射线衍射(XRD)、氨气程序升温脱附(NH3-TPD)对载体样品进行了表征. 结果表明, 碱土金属的添加增大了ZrO₂-Al₂O₃的比表面积, Sr-Zr-Al样品经1000 °C焙烧5 h后具有最大的比表面积, 为164 m²·g^-1. 对催化剂进行了H₂程序升温还原(H₂-TPR)、X射线光电子能谱(XPS)和活性表征, 考察了催化剂对C₃H₈的转化活性. 测试结果表明, 添加碱土金属能有效提高催化剂上丙烷的转化活性.     

Catalytic Performance of Spherical MCM-41 Modified with Copper and Iron as Catalysts of NH3-SCR Process

Spherical MCM-41 with various copper and iron loadings was prepared by surfactant directed co-condensation method. The obtained samples were characterized with respect to their structure (X-ray diffraction, XRD), texture (N₂ sorption), morphology (scanning electron microscopy, SEM), chemical composition (inductively coupled plasma optical emission spectrometry, ICP-OES), surface acidity (temperature programmed desorption of ammonia, NH₃-TPD), form, and aggregation of iron and copper species (diffuse reflectance UV-Vis spectroscopy, UV-Vis DRS) as well as their reducibility (temperature programmed reduction with hydrogen, H₂-TPR). The spherical MCM-41 samples modified with transition metals were tested as catalysts of selective catalytic reduction of NO with ammonia (NH₃-SCR). Copper containing catalysts presented high catalytic activity at low-temperature NH₃-SCR with a very high selectivity to nitrogen, which is desired reaction products. Similar results were obtained for iron containing catalysts, however in this case the loadings and forms of iron incorporated into silica samples very strongly influenced catalytic performance of the studied samples. The efficiency of the NH₃-SCR process at higher temperatures was significantly limited by the side reaction of direct ammonia oxidation. The reactivity of ammonia molecules chemisorbed on the catalysts surface in NO reduction (NH₃-SCR) and their selective oxidation (NH₃-SCO) was verified by temperature-programmed surface reactions.     

担载型过渡金属催化剂上CH4＋C2H4→C3H8反应的初步研究

担载型过渡金属催化剂上ＣＨ４＋Ｃ２Ｈ４→Ｃ３Ｈ８反应的初步研究阎子峰薛锦珍沈师孔①王弘立（中国科学院兰州化学物理研究所羰基合成与选择氧化国家重点实验室，兰州７３００００）关键词甲烷同系化过渡金属催化剂乙烯１前言在均相催化体系中，甲烷与其它饱和烃类的反...     

介质阻挡放电和CuZSM-5结合体系中等离子体对C2H4的作用

采用吸附、程序升温脱附及氧化和发射光谱等技术研究了介质阻挡放电对气相和催化剂表面吸附乙烯的作用. 实验表明, 介质阻挡放电等离子体能脱附催化剂表面吸附物种(如CO2和H2O等), 并引发表面化学反应生成新物种(如在等离子体作用下C2H4和O2生成CO2和H2O); 改变催化剂表面积碳化合物结构, 并降低其起燃点; 引发气相中乙烯发生反应生成中间物种或碎片(如CN和CH等). 在富氧体系NO/O2/N2中加入C2H4, 能使介质阻挡放电等离子体和CuZSM-5“一段法”结合体系产生协同效应, 提高NOx转化率. 该协同效应的产生与等离子体在气相及催化剂表面引发化学反应, 产生参与NOx还原反应的新稳态物种和短寿命高能活性物种有关.     

制备方法对LaMnO3上氯乙烯催化燃烧性能的影响

含氯挥发有机物(CVOCs)广泛用于化工原料以及有机溶剂,由于其毒性大,难降解,直接排放可引起严重的空气污染问题,采用催化燃烧的技术可以实现CVOCs高效净化,其关键在于高活性和高稳定性的催化剂.CVOCs净化催化剂主要有负载型贵金属催化剂、(复合)氧化物催化剂和复合分子筛催化剂.我们以具有高稳定性的LaMnO3钙钛矿为研究对象,主要考察了不同制备方法对于氯乙烯催化燃烧性能的影响;并通过XRD,Raman,N2-吸附脱附,O2-TPD,H2-TPR,ICP-AES,XPS等表征方法研究催化剂的结构和物化性能.性能评价结果表明,MnO2虽具有良好的催化性能,但LaMnO3催化剂则具有更好的循环稳定性.同时,制备方法对LaMnO3催化剂上氯乙烯催化燃烧的性能有显著的影响,其活性高低的顺序为:溶胶凝-胶法(SG)>共沉淀法(CP)>硬模版剂法(HT)>水热法(HM),其中LaMnO3-SG催化剂在182℃时氯乙烯的转化率即可达到90%.XPS结果表明,不同的制备方法导致LaMnO3催化剂表面La和Mn的富集程度不同,并显著影响了催化剂表面Mn离子的价态、分布和氧空穴的数量.其中,LaMnO3-SG催化剂具有最高的表面Mn4+浓度,其对应的氯乙烯催化燃烧活性最高.而对于LaMnO3-HM催化剂,La(OH)3的生成导致其具有最高的表面La/Mn比(2.29)和最低的表面Mn4+浓度.由XPS计算氧空穴浓度可知,LaMnO3-SG催化剂氧空穴浓度(1.03)远高于LaMnO3-HM催化剂表面的氧空穴浓度(0.07),进而LaMnO3-SG在O2-TPD中表现出更高的O2脱附量.进一步分析可知Mn4+离子浓度与氧空穴浓度成正相关的关系,即:Mn4+离子浓度越高,则表面氧空穴浓度越高.而催化剂表面氧空穴浓度越高,则有利于氧在催化剂表面的吸附和活化,从而使得催化剂表面氧物种的浓度增加,这与O2-TPD结果一致.同时,制备方法对催化剂氧化还原性能也有显著的影响,由H2-TPR所得催化剂的耗氢量顺序为:LaMnO3-SG>LaMnO3-CP>LaMnO3-HT>LaMnO3-HM,这与它们催化活性的顺序一致.结合XPS和H2-TPR结果可知,催化剂表面Mn4+/Mn3+比例高,则催化剂的氧化还原能力也越强.以上分析表明,LaMnO3催化剂的催化活性与催化剂表面Mn4+浓度和氧空穴数量相关.具有较高的Mn4+浓度有利于氯乙烯在催化剂表面吸附;而氧空穴数量的增加有利于氧在催化剂表面的吸附和活化,从而提高氯乙烯催化燃烧的反应性能.     

过渡金属（Cu，Fe，Mn，Co）改性高分散V2O5/TiO2作为高效NH3-SCR脱硝催化剂

选择性催化还原(SCR)是目前固定源及移动源中控制NOx排放最为有效的技术手段之一.工业上应用最广泛的商业SCR催化剂是钒基催化剂.钒基催化剂经钨(钼)改性后具有较好的活性、稳定性和抗水抗硫性能,但在应用过程中仍存在N2选择性较低、活性温度窗口(300–400 oC)较窄及高温下V2O5极易流失等不足,且钨(钼)的价格十分昂贵.因此,用廉价组分提高钒基催化剂的催化性能在实际工业应用中仍具有重要意义.研究发现,很多非贵金属(如Cu, Fe, Mn, Co, Ce, Zr, Nb, Sn, La等)都可以代替钨(钼)用来提高钒基催化剂的选择性、活性温度窗口和(热)稳定性能等.引入的金属通常以氧化物或钒酸盐形式存在,并与活性组分钒物种有很强的相互作用,从而提高钒物种的氧化还原性能及分散度,同时增大表面酸性位数量,抑制锐钛矿向金红石相转变.近年来很多研究发现,经金属改性的钒基催化剂以钒酸盐形式存在时可有效提高催化剂活性和 N2选择性,尤其可显著提高催化剂的(热)稳定性.本文采用浸渍法以廉价易得、储量丰富的过渡金属改性钒基催化剂,得到高度分散的M-V/TiO2(M = Cu, Fe, Mn, Co)脱硝催化剂.结果发现, Cu-V/TiO2和Fe-V/TiO2催化剂表现出较好的催化活性和N2选择性以及优异的稳定性和抗H2O/SO2性能,其中Cu-V/TiO2的工作温度窗口扩展到225–375oC. X射线衍射、拉曼光谱和EDX-mapping表征结果证明,钒物种及引入的金属高度分散在TiO2载体表面,并生成了钒酸盐.氢气程序升温还原结果表明,钒酸盐的形成导致钒物种的还原峰向低温区移动,有利于催化剂氧化还原性能的提升. X射线光电子能谱结果表明, Cu-V/TiO2催化剂表面具有更多的活性氧物种(Oα),且具有较强的电子间相互作用,是SCR活性提高的关键原因之一. NH3程序升温脱附和原位红外光谱实验结果表明,金属的引入可以提高酸量和酸强度; Cu-V/TiO2催化剂表面主要为Lewis酸性位,而Fe-V/TiO2催化剂表面主要为Br?nsted酸性位,两者可能导致不同的SCR反应机理,但均可以提高催化剂在高温下的N2选择性.综上所述,过渡金属改性的钒基催化剂中Cu-V/TiO2具有最好的活性和N2选择性以及较强的稳定性和抗H2O/SO2性能,可能得益于其表面更多的活性氧物种和更多更强的酸性位.     

一种新型高比表面积 TiO2载体在 NH3选择性催化还原反应中对 V2O5分散性的促进作用

A titania support with a large surface area was developed, which has a BET surface area of 380.5 m2/g, four times that of a traditional titania support. The support was ultrasonically impregnated with 5 wt%vanadia. A special heat treatment was used in the calcination to maintain the large sur‐face area and high dispersion of vanadium species. This catalyst was compared to a common V2O5‐TiO2 catalyst with the same vanadia loading prepared by a traditional method. The new cata‐lyst has a surface area of 117.7 m2/g, which was 38%higher than the traditional V2O5‐TiO2 catalyst. The selective catalytic reduction (SCR) performance demonstrated that the new catalyst had a wid‐er temperature window and better N2 selectivity compared to the traditional one. The NO conver‐sion was>80%from 200 to 450 °C. The temperature window was 100 °C wider than the traditional catalyst. Raman spectra indicated that the vanadium species formed more V‐O‐V linkages on the catalyst prepared by the traditional method. The amount of V‐O‐Ti and V=O was larger for the new catalyst. Temperature programmed desorption of NH3, temperature programmed reduction by H2 and X‐ray photoelectron spectroscopy results showed that its redox ability and total acidity were enhanced. The results are helpful for developing a more efficient SCR catalyst for the removal of NOx in flue gases.     

Thermal characterisation of molybdenum and platinum-molybdenum catalysts

Alumina supported Mo and Pt-Mo catalysts was subject to temperature programmed reduction (TPR) using H₂ and CO. After earlier oxidation step TPR–H₂ profiles shows different surface species, which depends on the composition of the catalysts and reduction temperature. Change in reducing gas from H₂ into CO results in significant changes in catalyst system. Hydrogen causes a decrease in oxidation number of metals, while carbon monoxide reacts with chemisorbed chemicals.     

硅胶表面结构的热稳定性研究

本文研究了热处理(200-1100℃)对自制的一种硅胶的表面结构的影响;测定了BET比表面(低温氮气吸附法)、孔体积、乙醇的吸附-脱附等温线,计算了孔径分布,求得了最可几Kelvin半径。结果表明,杂质的存在明显地降低硅胶的热稳定性。在发生熔结以前,孔径分布基本不变,当发生熔结时,孔半径显著减小。红外光谱的测定表明,随着热处理温度的升高,硅胶表面缔合羟基(～3500cm^-1)迅速减少,在～800°时已去除殆尽,而自由羟基(～3720cm^-1)减少缓慢,在1100℃时才迅速消失。X-射线衍射图表明,发生熔结后的硅胶显示有β-鳞石英的衍射峰,说明出现了有序晶相。对上述实验结果,文中作了初步的解释。     

甲烷催化部分氧化制合成气的反应机理

借助脉冲反应、质谱-程序升温表面反应（MS-TPSR）等技术研究了Ni／α-Al2O3催化剂上甲烷催化部分氧化制合成气（POM）的反应机理．结果表明,NiO上CH4不能解离产生H2只有当NiO被CH4还原为Ni0后,CH4才能解高产生H2,Ni0是CH4活化和POM反应的活性相;POM反应机理遵循直接氧化机理,CH4和O2均在Ni0上活化,活化过程形成的Ni…C和Niδ…Oδ物种是反应历程中的关键物种,Niδ …Oδ物种高选择性地与CH4解离产生的碳物种Ni…C反应生成CO．     

FT－IR和程序升温热谱技术研究Mo／HZSM－5催化剂的制备过程

采用ＦＴ－ＩＲ和程序升温热谱技术研究了Ｍｏ／ＨＺＳＭ－５催化剂的制备过程．结果表明Ｍｏ／ＨＺＳＭ－５样品在合适的温度下焙烧一定时间，Ｍｏ物种与ＨＺＳＭ－５分子筛的酸中心（主要是强酸中心）起作用，并且一部分Ｍｏ物种会迁移到分子筛孔道内．在外表面的Ｍｏ物种和在孔道内强酸中心作用的Ｍｏ物种，可能是对甲烷活化起作用的     

THE EFFECT OF DISPERSANT REAGENTS ON THE SODIUM OLEATE ADSORPTION AT THE SALT MINERALS-WATER INTERFACE

The influence of some dispersant reagents on the sodium oleate adsorption on the salt minerals surface has been investigated at the vicinity of pH 10. The presence of sodium lignin sulfate and low molecular weight acrylic polymer Cataflot P-40 caused the decrease of surfactant adsorption in the low concentration region of sodium oleate. On the other hand, the addition of 1000 g/t of polyethylene oxide (MW 200 000) did not cause such a change. The special shape of the adsorption isotherms has been done by the bidimensional concentration of alkaline earth metals soaps on the carbonate minerals surfaces. The vertical steps of isotherms were shifted to the high sodium oleate concentration region when both sodium lignin sulfate and Cataflot P-40 were added to the dolomite and magnesite suspensions. This effect was not observed for the calcite-sodium oleate system. The discrepancy was explained by Die blockade of magnesite species by these dispersant reagents. Changes in electrokinetic and stability behavior of these systems have been correlated with the precipitation conditions of both calcium and magnesium oleate.     

CuO-ZnO-ZrO_2催化甲醇水蒸汽重整反应机理和中间态

应用质谱在线技术,对CuO-ZnO-ZrO2催化甲醇水蒸汽重整(SRM)反应进行程序升温脱附(TPD)和程序升温表面反应(TPSR)研究.结果表明:在反应态催化剂表面,甲醇以分子吸附态形式存在,甲醇水蒸汽重整反应经历甲酸根中间物种.分别用CuO、CuO-ZnO、CuO-ZnO-ZrO2作催化剂,甲醇在气流中的摩尔分数分别高于5.4%、0.37%和0.17%时,甲酸根中间态的分解产物为CO2和H2;而甲醇在气流中的摩尔分数分别低于5.4%、0.37%和0.17%时,甲酸根中间态的分解产物为CO、CO2和H2.     

指数升温脱附研究

本文采用分子筛吸附苯或正已烷, 进行指数程序升温脱附。结果表明, 活化能与脱附最大速率所对应的温度(T_m)有线性关系, 即E_d=KT_m。对指数升温条件下得到的脱附图谱与各个脱附动力学参量之间的关系进行了数学分析, 并将分析结果与线性升温所得的结果相比较。各对应的动力学参数的数值基本相同。我们推导得到的指数升温基本方程与目前通用的线性升温基本方程~[2]相比较, 如果温度的测量精度相同则指数升温计算方法的精度比线性升温高(2T+△T)倍。实验还说明, 指数升温的曲线比线性升温容易控制。     

浸液pH值对铂催化剂反应性能和表面性质的影响

本文研究浸液pH值对铂催化剂性能的影响。用烷烃连续流动反应技术以及TPR、XPS、DRS和IR等手段表征催化剂表面性质因强酸处理产生的变化。结果表明:浸液pH值显著影响催化剂的反应性能。随浸液酸度增加,正己烷异构化和芳构化选择性呈线性增大,但却不影响铂的脱氢性能;并且酸度增加导致催化剂酸性(异丙苯裂解活性)下降和高温(>300℃)吸氢中心增加。测试数据也表明,酸处理导致载体表面性质发生了较大变化,氧化态铂物种与载体相互作用增强,部分铂变得较难还原。上述现象归因于在酸性条件下,酸解生成的Al~(3+)离子的再吸附,以及催化剂表面铂簇团短程有序结构的形成和非零价铂的存在。     

THE ROLE OF LATTICE AND GASEOUS OXYGEN ON THE OXIDATIVE COUPLING OF METHANE STUDIED BY A PULSE REACTION TECHNIQUE

A comparative study of the role of lattice and gaseous oxygen in theoxidative coupling of methane over Na~ /Cao and Ca_xSr_(1-x)TiO_3 perovskiteoxide catalysts was performed by using a pulse reaction technique with CH_4,O_2 and mixtures of CH_4and O_2.It was found that there is an oxygen species onthe Surface of Cao which is active only for the total oxidation of methane at thereaction temperature.These oxygen species.once reacted with methane andconsumed,can be regenerated by the adsorption of oxygen molecules from thegas phase or by the migration of the lattice oxysen from the bulk onto thesurface.In contrast,no such oxygen species and no reaction can be detected bymethane pulsed over Ca_xSr_(1-x)TiO_3perovskite oxide catalysts.Na~ can heavilysuppress the non-selective oxygen species on the surface,and When 5mol%Na~ was incorporated onto the surface of Cao,the sample showed no reactivityto methane.When oxygen exists in the gas phase,or the pulse containsmethane and oxygen,the reaction over(Cao is mai