离子印迹壳聚糖/凹土分离富集-火焰原子吸收光谱测定中药材中痕量Cd(Ⅱ)的研究

建立了离子印迹壳聚糖/凹凸棒石(IICA)分离富集-火焰原子吸收光谱(FAAS)测定中药材中痕量Cd(Ⅱ)的新方法。在动态吸附条件下,系统研究了溶液pH值、流速、洗脱条件和干扰离子对痕量Cd(Ⅱ)分离富集的影响。研究表明,在pH为4.5,上样流速为0.60mL/min条件下,Cd(Ⅱ)能被IICA定量富集;吸附的Cd(Ⅱ)可用1.0mol/L HCl-0.1mol/L甲基异丁酮的乙醇溶液,在流速为0.96mL/min条件下完全洗脱。优化条件下,IICA对Cd(Ⅱ)的动态吸附容量为56.45mg/g。线性范围为0.00097～1.28mg/L,r=0.9994,检出限(3σ,n=11)为0.97μg/L,相对标准偏差为1.32%(n=6,c=0.08mg/L),回收率在96.5%～106.4%之间。该方法操作简便,灵敏度和精密度高,可应用于实际中药材样品中痕量镉的测定。     

分子印迹壳聚糖/凹土分离富集-火焰原子吸收光谱测定痕量铅

建立了用分子印迹壳聚糖/凹凸棒石（MICA）分离富集-火焰原子吸收光谱（FAAS）测定痕量铅的新方法。 在动态吸附条件下,系统地研究了溶液pH值、流速、洗脱条件和干扰离子对痕量铅分离富集的影响;在pH=4.5,上样流速为0.60 mL/min的条件下,铅能被MICA定量富集;吸附的铅可用1.0 mol/L HCl-0.1 mol/L 甲基异丁酮的乙醇溶液在流速为0.96 mL/min条件下完全洗脱;在优化条件下,MICA对铅的动态吸附容量为36.78 mg/g。 线性范围为0～1.28 mg/L,r=0.999 7,检出限（3σ,n=11）为0.73 μg/L,相对标准偏差为1.69%(n=6,ρ=0.08 mg/L),回收率在98.7%～101.4%之间。 该方法操作简便、线性关系良好、灵敏度和精密度高,应用于实际水样中痕量铅的测定,结果满意。     

固载硫杂杯芳烃树脂分离富集-火焰原子吸收法测定痕量银

报道了色谱301固载硫杂杯芳烃树脂分离预富集-火焰原子吸收光谱法测定痕量银的新方法。探讨了固载硫杂杯芳烃树脂对银的吸附原理与最佳条件。将含Ag 试液在pH=10、温度为23±2℃的条件下恒温震荡10min,静置10min,Ag 可被树脂定量富集被吸附的Ag 可用5mL酸性硫脲(0.15mol/LHCl 0.15mol/L硫脲)完全洗脱,洗脱液中的银用火焰原子吸收光谱法测定。该法对银的检出限为0.17μg/L(3σ,n=11);线性范围为0.006~3mg/L。对0.18mg/L的Ag 标液进行7次测定,RSD=1.53%,回收率在99.9%~105.0%之间。用于“二次资源”锌矿渣和环境水样中痕量银的测定,结果满意。     

中孔分子筛Ti-MCM-48的合成及其对痕量银(Ⅰ)的吸附性能研究与应用

以正硅酸乙酯、钛酸丁酯为原料,十六烷基三甲基溴化铵为表面活性剂合成中孔分子筛Ti-MCM-48。研究了中孔分子筛Ti-MCM-48分离富集材料对银(Ⅰ)的吸附性能,优化了影响其吸附和解吸的主要条件。结果表明,在pH=3.0的柠檬酸-柠檬酸钠缓冲溶液中,恒温35℃振荡25min时,银(Ⅰ)能被该材料吸附完全,其静态饱和吸附容量为2.96mg/g。吸附在中孔分子筛Ti-MCM-48上的银(Ⅰ)可用5mL 0.5mol/L HNO3-0.1mol/L硫脲洗脱液完全洗脱。采用火焰原子吸收光谱法(FAAS)测定洗脱液中银(Ⅰ)的方法检出限(3σ)为21.39ng/mL,线性范围为0.02～5.0μg/mL(r=0.9995),相对标准偏差(RSD)为1.25%,加标回收率在96%～102%之间。方法可用于实际样品中痕量银的测定。     

磁性纳米材料固相萃取/火焰原子吸收光谱法测定环境水样中的痕量银离子

在纳米四氧化三铁表面包覆二氧化硅,并以十八烷基三甲氧基硅烷进行化学修饰,用作固相萃取吸附剂富集环境水样中的痕量银离子,用火焰原子吸收光谱法测定,建立了一种灵敏、快速、简便分析银离子的新方法。考察了水样pH值、吸附剂用量、螯合剂用量、振荡时间、洗脱剂、共存离子等对银离子回收率的影响。实验结果表明,对于200 mL水样,在pH 7.0、吸附剂用量为0.1 g、螯合剂5-Br-PADAP(0.5 g/L)用量为0.6 mL、吸附时间为10 min的条件下,材料对Ag+具有较好的吸附性,且用6 mL 1.0 mol/L的硝酸可完全洗脱所吸附的Ag+。在优化实验条件下,检出限(3σ)为0.15μg/L,相对标准偏差(10μg/L,n=6)为1.4%,富集因子达31。分别对河水、湖水样品中Ag+进行检测,加标回收率为85.0%~94.8%。     

氧化石墨烯/硫杂杯芳烃复合材料富集分离-石墨炉原子吸收法测定痕量铊

自制了一种新型氧化石墨烯/硫杂杯芳烃复合材料,用扫描电镜、红外光谱、元素分析、热分析对合成产品进行表征,用于痕量铊的富集,提出了氧化石墨烯/硫杂杯芳烃复合材料分离预富集,石墨炉原子吸收光谱法测定痕量铊的一种新方法,探讨了溶液pH值、温度、洗脱条件及干扰离子对痕量铊分离富集的影响,结果发现该材料对Tl3+具有较大吸附量。在pH 8.0,温度为(23±1)℃条件下,铊可被该材料定量吸附,其吸附容量为73.1 mg/g。吸附的铊可被5.0 mL酸性硫脲(0.5 mol/L HCl+1.0 mol/L硫脲)完全洗脱,方法的线性范围为0.012~15μg/L,检出限(3σ)为0.008μg/L,对0.50μg/L Tl3+工作液测定的RSD(n=7)为2.3%,加标回收率为93.6%~104.1%。此法用于生物样品和环境水样中痕量铊的测定,结果满意。     

纳米B2O3/TiO2复合材料的制备及其对痕量银的分离富集性能研究与应用

制备了新型纳米B2O3/TiO2吸附材料,并采用扫描电镜(SEM)及红外光谱(IR)对其进行表征,优化了纳米B2O3/TiO2复合材料对试液中痕量银的吸附和解吸条件,建立了纳米B2O3/TiO2分离富集-原子吸收光谱测定痕量银的新方法。当pH 4.3时,在22℃下振荡20 min,Ag+能被该材料快速吸附,其静态饱和吸附容量为11.72 mg/g,吸附在纳米B2O3/TiO2上的Ag+可用0.1 mol/L HNO3-0.05 mol/L硫脲(1∶4)完全洗脱。该方法的检出限为2.01μg/L,线性范围为0.01～4.00 mg/L,相对标准偏差(RSD)为1.8%,加标回收率为95%～105%。方法应用于实际矿渣样品中痕量银的测定,结果满意。     

三乙烯四胺修饰β-环糊精交联树脂分离富集/原子吸收法测定大米中的铅、镉

该文制备了一种新型吸附材料三乙烯四胺修饰β-环糊精交联树脂(TETA-β-CDP),并对其进行红外光谱表征,优化了该吸附材料对痕量铅、镉的吸附和解析条件,建立了动态条件下同时分离富集/原子吸收光谱测定大米中铅和镉的新方法。在p H 5.5时,样品溶液以1.0 m L/min流速过柱,试液中的Pb2+和Cd2+可被该树脂定量富集,其动态饱和吸附容量分别为22.8,31.3 mg/g,吸附在TETA-β-CDP上的Pb2+和Cd2+可用0.1 mol/L HCl以0.8 m L/min流速完全洗脱。该方法对铅、镉的检出限(3σ,n=11)分别为0.038 mg/L和0.016 mg/L;线性范围分别为0.2~20 mg/L和0.05~2.5 mg/L;相对标准偏差(RSD)分别为2.8%和1.7%;加标回收率分别为97.5%~101.0%和95.0%~102.5%。该方法用于大米样品中痕量铅、镉的测定,结果满意。     

SPE–ICP–AES法测定环境水样中Cr(Ⅲ)

建立固相萃取与电感耦合等离子体原子发射光谱法(ICP–AES)测定环境水样中Cr(Ⅲ)含量的方法。合成了功能化铁氧体磁性材料作为固相萃取剂,优化了固相萃取条件。当样品溶液的p H值为2.5时,固相萃取剂能在5 min内完成Cr(Ⅲ)的富集。使用1 mol/L HNO3在3 min内即可解吸附分离Cr(Ⅲ),饱和吸附容量为15.2μg/mg,研究了共存离子的影响。Cr(Ⅲ)含量在1~50μg/L范围内与发射光谱强度呈良好的线性关系,线性相关系数为0.999 9,检出限为0.09μg/L,测定结果的相对标准偏差为2.2%(n=8),回收率为97.7%~104.8%。该方法高效、快速,测定结果准确可靠,可用于测定环境水样品中的痕量Cr(Ⅲ)。     

纳米硅羟基磷灰石分离富集-火焰原子吸收法测定水样中痕量铅

提出了纳米硅羟基磷灰石(Si-HAP)分离富集,火焰原子吸收光谱法(FAAS)测定水样中痕量铅的新方法。考察了铅在纳米Si-HAP上的吸附动力学、最佳酸度和吸附容量。实验结果表明:在最佳实验条件下,纳米Si-HAP能定量、快速地吸附水中的痕量Pb2+,其静态吸附容量24.33 mg/g;吸附在纳米Si-HAP上的Pb2+可用0.01mol/L EDTA-Ca完全洗脱。本法对Pb2+的检出限为1.33 ng/mL,相对标准偏差为4.0%(n=11,c=1μg/mL),加标回收率在94.9%~102.0%之间。方法用于实际水样中铅的测定,结果满意。     

Enantiomer separation by CEC——Enantiomer separation by packed-capillary electrochromatography

Three chiral compounds were successfully separated in a short time with two enantiomer separation models on packed-capillary electrochromatography (CEC). (i) 75 μm I.D. capillaries were packed with 5 μm β-cyclodextrin (β-CD) chiral stationary phase (CSP). Effects of voltage, pH and concentration of organic modifier on electroosmotic flow (EOF) and chiral separations were investigated systematically. Enantiomers of a neutral compound (benzoin) and a neutral drug (mephenytoin) were separated within a short time with high efficiency. Efficiency of 32 000 theoretical plates per meter and resolution (R_s) of 1.42 were achieved for enantiomers of benzoin using a βCD packed column with 6.2 cm packed length. Efficiency of 45 000 theoretical plates per meter and R_s of 3.40 were obtained for enantiomers of mephenytoin. Especially, the enantiomer separation of mephenytion was performed in just 3.4 min with R_s of 2.60. (ⅱ) 75 μm I.D. capillary was packed with octadecylsilica particles (ODS). Chiral separat     

Regioselectivity of olefin oxidation by iodosobenzene catalyzed by metalloporphyrins : control by the catalyst

The regioselectivity of the oxidation of three monosubstituted olefins, 6-phenoxyhex-1-ene, hex-1-ene and styrene, by iodosobenzene in the presence of various Fe-, Mn- or Cr-tetraaryl-porphyrins, was studied. It was found that, besides epoxides, known products from such systems, allylic alcohols and aldehydes were formed, the latter not being derived from the corresponding epoxides. The relative importance of these reactions greatly depends upon both the metal and porphyrin constituents of the catalyst. More particularly, the competition between epoxidation and allylic hydroxylation can be efficiently controlled by non-bonded interactions between the olefin and porphyrin substituents. No hydroxylation of the aromatic rings and no oxidative dealkylation of the ether function was detected.     

Glycosidase inhibition by macrolide antibiotics elucidated by STD-NMR spectroscopy

A glycosynthase approach was attempted to glycodiversify macrolide antibiotics, using DesR, a family-3 retaining beta-glucosidase involved in the self-resistance mechanism of methymycin production. STD-NMR was used to probe enzyme-substrate interactions. Analysis of competitive STD-NMR experiments between erythromycin A and a chromogenic substrate (pNP-beta-d-glucose) with the hydrolytically inactive nucleophile mutants led us to discover a family of unprecedented glycosidase inhibitors. Analysis of kinetic data with wild-type DesR determined that erythromycin is a competitive inhibitor of the glucosidase (IC50 = 2.8 +/- 0.3 microM and Ki = 2 +/- 0.2 microM) with respect to the hydrolysis of pNP-beta-d-glucose. Comparable inhibitory data was obtained for clarithromycin; however, the inhibitory effect of azithromycin was weak and no significant inhibition was observed with methymycin or d-desosamine. This report documents significant inhibition of glycosidases by macrolide antibiotics and provides insight into the design of novel glycosidase inhibitors based on the macrolactone ring of macrolide antibiotics.     

Antibiotic recognition by binuclear metallo-beta-lactamases revealed by X-ray crystallography

Metallo-beta-lactamases are zinc-dependent enzymes responsible for resistance to beta-lactam antibiotics in a variety of host bacteria, usually Gram-negative species that act as opportunist pathogens. They hydrolyze all classes of beta-lactam antibiotics, including carbapenems, and escape the action of available beta-lactamase inhibitors. Efforts to develop effective inhibitors have been hampered by the lack of structural information regarding how these enzymes recognize and turn over beta-lactam substrates. We report here the crystal structure of the Stenotrophomonas maltophilia L1 enzyme in complex with the hydrolysis product of the 7alpha-methoxyoxacephem, moxalactam. The on-enzyme complex is a 3'-exo-methylene species generated by elimination of the 1-methyltetrazolyl-5-thiolate anion from the 3'-methyl group. Moxalactam binding to L1 involves direct interaction of the two active site zinc ions with the beta-lactam amide and C4 carboxylate, groups that are common to all beta-lactam substrates. The 7beta-[(4-hydroxyphenyl)malonyl]-amino substituent makes limited hydrophobic and hydrogen bonding contacts with the active site groove. The mode of binding provides strong evidence that a water molecule situated between the two metal ions is the most likely nucleophile in the hydrolytic reaction. These data suggest a reaction mechanism for metallo-beta-lactamases in which both metal ions contribute to catalysis by activating the bridging water/hydroxide nucleophile, polarizing the substrate amide bond for attack and stabilizing anionic nitrogen intermediates. The structure illustrates how a binuclear zinc site confers upon metallo-beta-lactamases the ability both to recognize and efficiently hydrolyze a wide variety of beta-lactam substrates.     

DNA damage by sulfite autoxidation catalyzed by cobalt complexes

DNA damage was investigated in the presence of sulfite, dissolved oxygen and cobalt(II) complexes with glycylglycylhistidine, glycylhistidyllysine, glycylglycyltyrosylarginine and tetraglycine. These studies indicated that only Co(II) complexed with glycylglycylhistidine (GGH) induced DNA strand breaks at low sulfite concentrations (1-80 microM) via strong oxidants formed in the reaction. In the presence of the other complexes, some damage occurred only in the presence of high sulfite concentrations (0.1-2.0 mM) after incubation for 4 h. In the presence of GGH, Co(II) and dissolved O2, DNA damage must involve a reactive high-valent cobalt complex. The damaging effect was increased by adding S(IV), due to the oxysulfur radicals formed as intermediates in S(IV) autoxidation catalyzed by the complex. SO3 -, HO and H radicals were detected by EPR-spin trapping experiments with DMPO (5,5-dimethyl-1-pyrroline N-oxide). The results indicate that Co(II) binds O2 in the presence of GGH, and leads to the formation of a DMPO-HO adduct without first forming free superoxide or hydroxyl radical, supporting the participation of a reactive high-valent cobalt complex.