固载硫杂杯芳烃树脂分离富集-火焰原子吸收法测定痕置银

报道了色谱301固载硫杂杯芳烃树脂分离预富集-火焰原子吸收光谱法测定痕量银的新方法。探讨了固载硫杂杯芳烃树脂对银的吸附原理与最佳条件。将含Ag^＋试液在pH=10、温度为23±2℃的条件下恒温震荡10min，静置10min，Ag^＋可被树脂定量富集被吸附的Ag^＋可用5mL酸性硫脲（0．15mol／L HCl＋0．15mol／L硫脲）完全洗脱，洗脱液中的银用火焰原子吸收光谱法测定。该法对银的检出限为0．17μg／L（3σ，n=11）；线性范围为0．006—3mg／L。对0．18mg／L的Ag^＋标液进行7次测定，RSD=1．53％。回收率在99．9％-105．0％之间。用于“二次资源”锌矿渣和环境水样中痕量银的测定，结果满意。     

负载硫杂杯芳烃树脂微柱分离富集-火焰原子吸收法测定痕量金

建立了大孔径树脂D101负载硫杂杯芳烃树脂微柱分离富集-火焰原子吸收光谱法测定痕量金的新方法。探讨了负载硫杂杯芳烃树脂对金的吸附原理与最佳条件。该法对金的检出限为0.23 ng/mL(3σ,n=11),线性范围为0.01~1μg/mL。对0.2μg/mL的Au 标液进行5次测定,RSD=2.1%,加标回收率在98.4%~103.3%之间。方法用于矿渣样中痕量金的分析。     

氧化石墨烯/硫杂杯芳烃复合材料富集分离-石墨炉原子吸收法测定痕量铊

自制了一种新型氧化石墨烯/硫杂杯芳烃复合材料,用扫描电镜、红外光谱、元素分析、热分析对合成产品进行表征,用于痕量铊的富集,提出了氧化石墨烯/硫杂杯芳烃复合材料分离预富集,石墨炉原子吸收光谱法测定痕量铊的一种新方法,探讨了溶液pH值、温度、洗脱条件及干扰离子对痕量铊分离富集的影响,结果发现该材料对Tl3+具有较大吸附量。在pH 8.0,温度为(23±1)℃条件下,铊可被该材料定量吸附,其吸附容量为73.1 mg/g。吸附的铊可被5.0 mL酸性硫脲(0.5 mol/L HCl+1.0 mol/L硫脲)完全洗脱,方法的线性范围为0.012~15μg/L,检出限(3σ)为0.008μg/L,对0.50μg/L Tl3+工作液测定的RSD(n=7)为2.3%,加标回收率为93.6%~104.1%。此法用于生物样品和环境水样中痕量铊的测定,结果满意。     

罗丹宁-壳聚糖固相萃取-原子吸收光谱法测定环境水样中痕量银

本文采用化学修饰技术制备了新型固相萃取材料罗丹宁-壳聚糖,用傅立叶红外(IR)光谱对其进行了表征。以该材料作为固相萃取剂,采用火焰原子吸收(FAAS)法为检测手段,在动态条件下系统研究了该吸附材料对痕量Ag+的吸附性能。研究结果表明:在pH=5.0,室温下以1.8mL/min速度流过分离柱,试液中的Ag+能被该材料定量吸附,其动态饱和吸附容量为72.62mg/g。吸附的Ag+可用8mL 0.1mol/L硫脲-0.05 mol/L HNO3混合液以0.7 mL/min流速完全洗脱,洗脱液中的Ag+用FAAS法测定。该方法对Ag+的检出限(3σ,n=11)为8.50μg/L,线性范围为0.01~5.0mg/L,相对标准偏差(RSD)为0.72%;加标回收率在97.8%~102.7%之间。方法用于实际环境水样中痕量Ag+的测定,结果满意。     

三正辛胺萃淋树脂的合成及对银分离富集的研究

报道了Levextrel型三正辛胺（TOA）萃淋树脂的合成方法及对银分离富集的研究，用新合成的萃淋树脂，铅锌冶炼矿渣中的银在1mol/L的盐酸介质中定量吸附后可用0．25mol/L NH4Cl-0.5mol/L硫脲洗脱，以火焰原子吸收光谱法测定，其回收率为99．4％－104．3％。此树脂对浓度低至0．5μg/mL的银亦可富集和定量回收，并有较长的使用寿命。     

PP(聚丙烯)-二苯氨基脲树脂分离富集原子吸收法测定地质样品中的银

研究了PP(聚丙烯)-二苯氨基脲树脂的合成及其分离富集样品中银的条件。于1mol／L的HCl介质中,银定量吸附在PP(聚丙烯)-二笨氨基脲树脂上,用0．5mol／L硫脲溶液洗脱,火焰原子吸收光谱法测定。回收率在96.4％～103．2％之间。可用于实际地质样品中贵金属的分离富集与测定。     

三聚氰胺-甲醛-三乙烯四胺树脂的合成及其对痕量银的吸附性能研究与应用

以甲醛为交联剂,以三聚氰胺、三乙烯四胺为原料合成了一种新型的三聚氰胺-甲醛-三乙烯四胺(MF-TETA)分离树脂,研究了MF-TETA分离树脂对痕量银的分离富集性能,探讨了MF-TETA分离树脂对银的吸附原理与最佳条件。在pH6.0、温度为35℃的条件下,试液中的银可被MF-TETA树脂定量吸附,其静态饱和吸附容量为32 mg/g,吸附在树脂上的银可用10 mL0.05 mol/L HNO3完全洗脱,洗脱液中的银用火焰原子吸收光谱法(FAAS)测定。该法对银的检出限为16 ng/mL(3σ,n=11),线性范围为0.05~5mg/mL,RSD=2.2%,回收率在95.8%~102.0%之间,方法可用于中草药中痕量银的测定。     

纳米B2O3/TiO2复合材料的制备及其对痕量银的分离富集性能研究与应用

制备了新型纳米B2O3/TiO2吸附材料,并采用扫描电镜(SEM)及红外光谱(IR)对其进行表征,优化了纳米B2O3/TiO2复合材料对试液中痕量银的吸附和解吸条件,建立了纳米B2O3/TiO2分离富集-原子吸收光谱测定痕量银的新方法。当pH 4.3时,在22℃下振荡20 min,Ag+能被该材料快速吸附,其静态饱和吸附容量为11.72 mg/g,吸附在纳米B2O3/TiO2上的Ag+可用0.1 mol/L HNO3-0.05 mol/L硫脲(1∶4)完全洗脱。该方法的检出限为2.01μg/L,线性范围为0.01～4.00 mg/L,相对标准偏差(RSD)为1.8%,加标回收率为95%～105%。方法应用于实际矿渣样品中痕量银的测定,结果满意。     

聚乙烯-双硫腙复膜树脂分离富集/原子吸收法测定地质样品中的痕量金

研究了聚乙烯双硫腙复膜树脂的合成及其分离富集痕量金的条件。于pH为2.0的HCl介质中,金离子被定量吸附在聚乙烯双硫腙复膜树脂上,并可用5%硫脲-0.1 mol/LHCl溶液洗脱,洗脱液用火焰原子吸收光谱法测定,金的回收率在91.5%~99.7%之间。本法可用于地质样品中痕量金的分离富集与测定。     

磁性纳米材料固相萃取/火焰原子吸收光谱法测定环境水样中的痕量银离子

在纳米四氧化三铁表面包覆二氧化硅,并以十八烷基三甲氧基硅烷进行化学修饰,用作固相萃取吸附剂富集环境水样中的痕量银离子,用火焰原子吸收光谱法测定,建立了一种灵敏、快速、简便分析银离子的新方法。考察了水样pH值、吸附剂用量、螯合剂用量、振荡时间、洗脱剂、共存离子等对银离子回收率的影响。实验结果表明,对于200 mL水样,在pH 7.0、吸附剂用量为0.1 g、螯合剂5-Br-PADAP(0.5 g/L)用量为0.6 mL、吸附时间为10 min的条件下,材料对Ag+具有较好的吸附性,且用6 mL 1.0 mol/L的硝酸可完全洗脱所吸附的Ag+。在优化实验条件下,检出限(3σ)为0.15μg/L,相对标准偏差(10μg/L,n=6)为1.4%,富集因子达31。分别对河水、湖水样品中Ag+进行检测,加标回收率为85.0%~94.8%。     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.